|
Title: Shares Accepted only during Dev Fee? Post by: davemanet on November 05, 2017, 12:41:31 AM Hi All, I have a really weird problem. My system was working for weeks straight. Then today all the sudden, I only got Share Found, but no Share Accepted.
Oddly, when Claymore switches to the Dev Fee, it gets Shares Accepted. Does anyone know what might possibly be wrong? I'm using Claymore 10 (via Simplemining) to Ethermine. Below you can see share accepted once it's on Dev Fee, but no longer once it switches off. GPU0 t=47C fan=27%, GPU1 t=51C fan=27%, GPU2 t=49C fan=27%, GPU3 t=50C fan=27%, GPU4 t=44C fan=27%, GPU5 t=51C fan=27%, GPU6 t=4 6C fan=27%, GPU7 t=49C fan=27% DevFee: ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444 DevFee: ETH: Stratum - Connected (us1.ethermine.org:4444) ETH: Authorized DevFee: start mining DevFee: ETH: 11/05/17-01:27:25 - SHARE FOUND - (GPU 5) ETH: Share accepted (62 ms)! DevFee: ETH: 11/05/17-01:27:27 - New job from us1.ethermine.org:4444 (FAILOVER 1) DevFee: ETH: 11/05/17-01:27:32 - SHARE FOUND - (GPU 1) ETH: Share accepted (58 ms)! DevFee: ETH: 11/05/17-01:27:47 - SHARE FOUND - (GPU 1) GPU0 t=47C fan=27%, GPU1 t=51C fan=27%, GPU2 t=49C fan=27%, GPU3 t=50C fan=27%, GPU4 t=44C fan=27%, GPU5 t=52C fan=27%, GPU6 t=4 6C fan=27%, GPU7 t=49C fan=27% DevFee: stop mining and disconnect GPU0 t=47C fan=27%, GPU1 t=50C fan=27%, GPU2 t=49C fan=27%, GPU3 t=50C fan=27%, GPU4 t=44C fan=27%, GPU5 t=51C fan=27%, GPU6 t=4 6C fan=27%, GPU7 t=49C fan=27% GPU0 t=47C fan=27%, GPU1 t=51C fan=27%, GPU2 t=49C fan=27%, GPU3 t=50C fan=27%, GPU4 t=44C fan=27%, GPU5 t=51C fan=27%, GPU6 t=4 6C fan=27%, GPU7 t=49C fan=27% ETH: 11/05/17-01:28:55 - SHARE FOUND - (GPU 0) ETH: 11/05/17-01:29:02 - SHARE FOUND - (GPU 7) GPU0 t=46C fan=27%, GPU1 t=50C fan=27%, GPU2 t=49C fan=27%, GPU3 t=50C fan=27%, GPU4 t=44C fan=27%, GPU5 t=51C fan=27%, GPU6 t=4 6C fan=27%, GPU7 t=49C fan=27% ETH: 11/05/17-01:29:29 - SHARE FOUND - (GPU 0) ETH: 11/05/17-01:29:49 - SHARE FOUND - (GPU 2) Title: Re: Shares Accepted only during Dev Fee? Post by: leonix007 on November 05, 2017, 02:39:25 AM Failover pool has been activiated, seems there is a trouble from your fist pool, try to restart miner and use the first config pool, and check your failover pool if properly configured, in claymore it is in your config.
Title: Re: Shares Accepted only during Dev Fee? Post by: davemanet on November 05, 2017, 03:30:25 AM Failover pool has been activiated, seems there is a trouble from your fist pool, try to restart miner and use the first config pool, and check your failover pool if properly configured, in claymore it is in your config. I'm using simplemining which doesn't let me set a failover pool, so I can only change the first config pool. What's weird is that my other rigs are connected to the same pool just fine. Is this odd at all, or is it normal for some rigs to work on a pool, and some to not? Title: Re: Shares Accepted only during Dev Fee? Post by: Deathwing on November 05, 2017, 04:18:32 AM Failover pool has been activiated, seems there is a trouble from your fist pool, try to restart miner and use the first config pool, and check your failover pool if properly configured, in claymore it is in your config. I'm using simplemining which doesn't let me set a failover pool, so I can only change the first config pool. What's weird is that my other rigs are connected to the same pool just fine. Is this odd at all, or is it normal for some rigs to work on a pool, and some to not? Title: Re: Shares Accepted only during Dev Fee? Post by: sigtmerchant on November 05, 2017, 04:23:35 AM Failover pool has been activiated, seems there is a trouble from your fist pool, try to restart miner and use the first config pool, and check your failover pool if properly configured, in claymore it is in your config. I'm using simplemining which doesn't let me set a failover pool, so I can only change the first config pool. What's weird is that my other rigs are connected to the same pool just fine. Is this odd at all, or is it normal for some rigs to work on a pool, and some to not? No it's not normal, but I would first double and triple check my settings in bat file to make sure they work fine with my hardware. Most likely it's some tiny little thing you're overseeing, as it usually happens with computers :) Title: Re: Shares Accepted only during Dev Fee? Post by: davemanet on November 05, 2017, 08:13:17 AM i will start to look at the different settings. does this clue help at all? ETH:: No new jobs were received for 10 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options),
disconnect. ETH: 11/05/17-09:09:03 - SHARE FOUND - (GPU 0) ETH: 11/05/17-09:09:05 - SHARE FOUND - (GPU 7) ETH: 11/05/17-09:09:17 - SHARE FOUND - (GPU 7) ETH: 11/05/17-09:09:22 - SHARE FOUND - (GPU 1) ETH: 11/05/17-09:09:22 - SHARE FOUND - (GPU 3) ETH: 11/05/17-09:09:23 - SHARE FOUND - (GPU 6) ETH: 11/05/17-09:09:26 - SHARE FOUND - (GPU 4) GPU0 t=50C fan=27%, GPU1 t=46C fan=27%, GPU2 t=46C fan=27%, GPU3 t=47C fan=27%, GPU4 t=44C fan=27%, GPU5 t=48C fan=27%, GPU6 t=4 7C fan=27%, GPU7 t=49C fan=27% ETH: 11/05/17-09:09:31 - SHARE FOUND - (GPU 1) ETH:: No new jobs were received for 10 mins - something is wrong with the pool (or check -ejobtimeout and -djobtimeout options), disconnect. ETH: Stratum - connecting to 'us2.ethermine.org' <45.79.103.105> port 4444 ETH: Stratum - Connected (us2.ethermine.org:4444) ETH: Authorized |