|
Title: Can you run Dash miner at 120 Volt using APW3++? Post by: BTCTheGreat on November 09, 2017, 04:23:34 PM Can you run Dash miner at 120 Volt using APW3++?
Title: Re: Can you run Dash miner at 120 Volt using APW3++? Post by: BTCTheGreat on November 10, 2017, 02:01:05 PM Please help me out guys here....
Title: Re: Can you run Dash miner at 120 Volt using APW3++? Post by: Vann on November 10, 2017, 02:22:20 PM The Antminer D3 TDP is ~1200 W and according to the APW3++ specifications:
Quote The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power. https://shop.bitmain.com/productDetail.htm?pid=00020170627175024105t4k8SjM5067C So you would need to underclock for it run at <17.5 GH/s and use less power. Title: Re: Can you run Dash miner at 120 Volt using APW3++? Post by: BTCTheGreat on November 10, 2017, 03:16:35 PM So if I don't underclock...it might burn? Are there any videos on how to set it up or underclock?
Title: Re: Can you run Dash miner at 120 Volt using APW3++? Post by: hardworker27 on November 10, 2017, 04:12:27 PM I have been worried about this too. :(
I'm thinking about getting this one https://www.amazon.com/Converter-toroidal-transformer-protection-continous/dp/B01NCU984W/ref=sr_1_17?ie=UTF8&qid=1510330262&sr=8-17&keywords=120v+to+220v+converter or this one https://www.amazon.com/Rockstone-Power-Voltage-Transformer-Converter/dp/B00CLYMMCC/ref=sr_1_19_sspa?ie=UTF8&qid=1510330262&sr=8-19-spons&keywords=120v+to+220v+converter&psc=1, not sure if anybody here used it or not? :( Title: Re: Can you run Dash miner at 120 Volt using APW3++? Post by: HELIUM_COIN on November 15, 2017, 06:56:55 AM I have been worried about this too. :( I'm thinking about getting this one https://www.amazon.com/Converter-toroidal-transformer-protection-continous/dp/B01NCU984W/ref=sr_1_17?ie=UTF8&qid=1510330262&sr=8-17&keywords=120v+to+220v+converter or this one https://www.amazon.com/Rockstone-Power-Voltage-Transformer-Converter/dp/B00CLYMMCC/ref=sr_1_19_sspa?ie=UTF8&qid=1510330262&sr=8-19-spons&keywords=120v+to+220v+converter&psc=1, not sure if anybody here used it or not? :( uhm I am as clueless as you guys but just wanted you to know that a step-up transformer is going to use more electric and add to your bill. From what I can see you should be able to get 1200W at the wall which is enough to power the antminers? I saw someone on youtube say his D3 was only using 1000 watts... But of course please do your own research and let us all know what you figure out. Thanks! Title: Re: Can you run Dash miner at 120 Volt using APW3++? Post by: bearsworth on November 15, 2017, 07:09:03 AM You can run the miner with the PSU of you undervolt it. I would recommend this or buy a pc power supply that is 1500 watts or more. Undervolting is simple I forgot where it was probably advanced settings next to page where you enter the pools. If you do 450M it should be okay.
|