|
Title: D3 Antminer firmware update for additional mining algorithms Post by: D3 Antminer on November 09, 2017, 05:03:33 PM maybe it is possible , probably not
Anyway , just try it. Nobody loose anything https://ibb.co/hB3DoG https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: MikeHenderson on November 11, 2017, 02:09:48 AM maybe it is possible , probably not Anyway , just try it. Nobody loose anything https://ibb.co/hB3DoG https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition Signed Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: bitfools on November 11, 2017, 03:15:57 AM maybe it is possible , probably not Anyway , just try it. Nobody loose anything https://ibb.co/hB3DoG https://www.change.org/p/https-twitter-com-bitmaintech-d3-antminer-firmware-update-for-additional-mining-algorithms?recruiter=831205993&utm_source=share_petition&utm_medium=copylink&utm_campaign=share_petition&utm_term=share_petition It's DOA, not going to happen KAPUT All the other x11 coins are penny coin worth 2 satoshi, only 'dash' was high value, now with a D3 you can mine $2 dash/day, but it costs $4/day for electricity, the other coins U can mine, but the ROI is still negative. What's a D-3 good for?? space heater, if you can handle the noise of a jet engine in your house In theory the ASIC should have a 'developers kit' it should have a way to down-load micro-code and re-deploy the HW, sadly BITMAIN doesn't work that way, they're control freaks, and NEVER give their customers the keys to the car. Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: Renanxx1 on November 15, 2017, 10:59:26 PM Done, lets try.
Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: leowonderful on November 15, 2017, 11:20:52 PM I've posted this ten times and I'll post it again for all of you people.
The D3 is an ASIC-based miner. It can only hash one algorithm that it was physically designed to hash because of the way ASICs work. The Baikal miners and multi algo X-series miners were FPGA miners that could be reconfigured to hash different algorithms with a firmware update (FPGAs are designed to be modified). No firmware update can add more algorithms to the D3. Only a new miner release could do that, and it'd require Bitmain to make an FPGA-based miner which would also decrease the efficiency of the miner. Signing this will not do anything and it wouldn't even if Bitmain wanted to. There's no way to "add" algorithms on to existing miners. Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: dndssc on November 15, 2017, 11:37:31 PM I've posted this ten times and I'll post it again for all of you people. this is true, but if bitmain release a firmware that allow to mine single algos included in x11 algo the d3 return profitableThe D3 is an ASIC-based miner. It can only hash one algorithm that it was physically designed to hash because of the way ASICs work. The Baikal miners and multi algo X-series miners were FPGA miners that could be reconfigured to hash different algorithms with a firmware update (FPGAs are designed to be modified). No firmware update can add more algorithms to the D3. Only a new miner release could do that, and it'd require Bitmain to make an FPGA-based miner which would also decrease the efficiency of the miner. Signing this will not do anything and it wouldn't even if Bitmain wanted to. There's no way to "add" algorithms on to existing miners. Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: Jrockinyou on November 28, 2017, 11:53:52 PM ^What he said!
Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: monkeyxking on November 29, 2017, 12:23:29 AM I've posted this ten times and I'll post it again for all of you people. The D3 is an ASIC-based miner. It can only hash one algorithm that it was physically designed to hash because of the way ASICs work. The Baikal miners and multi algo X-series miners were FPGA miners that could be reconfigured to hash different algorithms with a firmware update (FPGAs are designed to be modified). No firmware update can add more algorithms to the D3. Only a new miner release could do that, and it'd require Bitmain to make an FPGA-based miner which would also decrease the efficiency of the miner. Signing this will not do anything and it wouldn't even if Bitmain wanted to. There's no way to "add" algorithms on to existing miners. Man, I'm with you with how frustrating these people are. It's like you telling them 1 + 2 always equals 3. And they are like "Oh yes. That is true, but what if you do 2 + 1? Eh?" Just let the retards tire themselves out dreaming. Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: leowonderful on November 29, 2017, 12:57:32 AM ^What he said! I have no idea what the person above you was even rambling about. The D3 mines only X11 and X11 is not compatible with any other X algorithm. There is no way to modify it to make it do so. I've posted this ten times and I'll post it again for all of you people. The D3 is an ASIC-based miner. It can only hash one algorithm that it was physically designed to hash because of the way ASICs work. The Baikal miners and multi algo X-series miners were FPGA miners that could be reconfigured to hash different algorithms with a firmware update (FPGAs are designed to be modified). No firmware update can add more algorithms to the D3. Only a new miner release could do that, and it'd require Bitmain to make an FPGA-based miner which would also decrease the efficiency of the miner. Signing this will not do anything and it wouldn't even if Bitmain wanted to. There's no way to "add" algorithms on to existing miners. Man, I'm with you with how frustrating these people are. It's like you telling them 1 + 2 always equals 3. And they are like "Oh yes. That is true, but what if you do 2 + 1? Eh?" Just let the retards tire themselves out dreaming. Title: Re: D3 Antminer firmware update for additional mining algorithms Post by: nathan1 on February 19, 2018, 10:07:49 AM oh no, you just crushed my dreams. was just about to pick up my d3 from the attic to power it up again and start mining bitcoins. :'(
|