|
Title: CGMiner 3.2.2 reporting wrong temp for 5770? Post by: Joori on June 22, 2013, 12:38:46 PM So, I decided to slap in my old 5770 (flashed to 6770) along side my 2 7970's and after some mucking about having to hook up external power to one of the powered risers hosting one of the 7970's, I have the 7970's hashing away at full speed. A voltage drop caused the primary card to slow to a crawl, 2 cards with no power to the risers is fine but add another card in and I definitely needed more power than the board was giving...
Anyway, getting off track a little.. I'm using the latest version of CGMiner (3.2.2) and whilst tuning clocks on the 5770, I noticed that CGMiner was reporting a different temperature reading than what HWiNFO was reporting, a discrepancy of 12C! The GPU core seems hotter than what CGMiner is reporting. CGMiner is reporting correctly for the 2 7970's but not for the 5770... I'm wondering if this is a bug? See for yourself. Check out the 5770 (marked out in a RED box) and compare it to the value reported for the Thermal Diode in HWiNFO... Disregard the fan speed, I dropped it to a low enough value so I could compare the temperatures easily. I have the fan on 85% atm and the temperature in HWiNFO dropped to 73C but there was no drop in CGMiner. https://i.imgur.com/oDCCqxs.png Title: Re: CGMiner 3.2.2 reporting wrong temp for 5770? Post by: -ck on June 22, 2013, 12:43:41 PM There appear to be 4 temperature sensors on your 5770. Cgminer only gets the one value offered from the ATI display library and reports it back. It seems the ATI Display Library is reporting back temperature GPU TS0 (whatever tf that is).
Title: Re: CGMiner 3.2.2 reporting wrong temp for 5770? Post by: Joori on June 22, 2013, 01:08:28 PM **Edit** Comment is irrelevant, I just thought it was weird seeing a different reading through cgminer :) **Edit 2** Come to think of it, I'm using 13.6 beta drivers so perhaps the issue is there rather than CGMiner. As you said the application is getting only one value from the display driver so perhaps the driver itself is reporting incorrectly, although why is MSI reading the thermal diode straight up.... If the library was spitting out an incorrect value wouldn't MSI also show the same value that CGMiner is showing? Title: Re: CGMiner 3.2.2 reporting wrong temp for 5770? Post by: -ck on June 22, 2013, 02:26:34 PM Other windows monitoring tools don't actually use the ATI Display Library. They have direct access to certain registers and can read them which cgminer will never have.
Title: Re: CGMiner 3.2.2 reporting wrong temp for 5770? Post by: Joori on June 22, 2013, 02:55:45 PM Oh I see, I thought cgminer read the same info. Clearly I was wrong so thanks for the clarification. :)
Title: Re: CGMiner 3.2.2 reporting wrong temp for 5770? Post by: ssateneth on June 23, 2013, 03:31:46 AM I have many 5k series cards. cg/bfgminer does not read "Thermal Diode". It only reads "TS0"
Title: Re: CGMiner 3.2.2 reporting wrong temp for 5770? Post by: Joori on June 23, 2013, 08:25:04 AM I'd imagine if my 7970's had more than one sensor it would read the TS0 sensor instead of the Thermal Diode. They're only the Ghz versions so no sensor on the VRM's. I think the 5770 is dying tho cause I just came back from the old's place after a few hours there and cgminer was reporting it DEAD. Weird electrical smell hovering around but neither of the cards are emitting that smell. *shrugs* if it dies, it dies :)
|
