Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: opies32765 on November 15, 2017, 06:17:10 PM



Title: AMD Drivers Graphic VS Compute settings Issue
Post by: opies32765 on November 15, 2017, 06:17:10 PM
Guys,

I have one card on one of my rigs that will not switch from graphics to compute on the latest drivers...i have rebooted countless times...nothing

Anyone else have this issue ?

Thanks in advance


Title: Re: AMD Drivers Graphic VS Compute settings Issue
Post by: P00P135 on November 15, 2017, 06:44:54 PM
Probably not going to get help with such little information.


Title: Re: AMD Drivers Graphic VS Compute settings Issue
Post by: Souran on November 15, 2017, 08:20:34 PM
Try doing it manually through registry

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\XXXX
Where XXXX is the number of the card (starting at 0000)

Find the card that has the "KMD_EnableInternalLargePage" dword set as 1, and change it to 2


Title: Re: AMD Drivers Graphic VS Compute settings Issue
Post by: Mobsy on February 19, 2018, 08:29:04 PM
Sorry to dig up this old thread, but I tried and my regedit shows all them values at "2" so... can't change that (1 of six RX 580) card from graphics to compute... still.
Anyone else found a workaround for this?


Title: Re: AMD Drivers Graphic VS Compute settings Issue
Post by: Golempl on February 19, 2018, 08:45:22 PM
Try this tool:

https://bitcointalk.org/index.php?topic=2815803.0

Registry mode info, most peoples don't know they need use hex values.
so anything above 0009 is 000a


Title: Re: AMD Drivers Graphic VS Compute settings Issue
Post by: MajMongoose on February 19, 2018, 10:32:12 PM
Had this same issue a week ago, when card 4 of 6 would not change...

   I ended up doing this:

  1. running atikmdag patcher to put the drivers back to normal
  2. go into Control Panel\Program and Features, and uninstalling the AMD software
  3. running the AMD clean uninstall utility
  4. reinstalling AMD 18.2.1
  5. running atikmdag patcher to patch the driver signatures

  I was then able to get all 6 cards to change to Compute -