|
Title: Error 15 and then BLUESCREEN Post by: rwtrader on November 17, 2017, 12:21:29 AM Well, here I am again with something new that has me shut down. I boot, Afterburner kicks in, then Claymore. It finds all 4 cards, then one after the other it says it can's fine temp, error 15 and throws me a bluescreen. I have googled it to death and tried some of the fixes in Bittalk and no luck. I now have all cards set to zero OC and still can't seem to get it to go. It was great this morning. Any more ideas?
I have: set OC to 0, reseated cards, reinstalled Claymore, run bluescreen troubleshooter in Win 10, reinstalled all NVidia drivers 22.21.13.8569. I have not: rolled back driver, bypassed Afterburner (the only way I know to OC). Thanks, Roy Title: Re: Error 15 and then BLUESCREEN Post by: leonix007 on November 17, 2017, 01:39:41 AM Well, here I am again with something new that has me shut down. I boot, Afterburner kicks in, then Claymore. It finds all 4 cards, then one after the other it says it can's fine temp, error 15 and throws me a bluescreen. I have googled it to death and tried some of the fixes in Bittalk and no luck. I now have all cards set to zero OC and still can't seem to get it to go. It was great this morning. Any more ideas? I have: set OC to 0, reseated cards, reinstalled Claymore, run bluescreen troubleshooter in Win 10, reinstalled all NVidia drivers 22.21.13.8569. I have not: rolled back driver, bypassed Afterburner (the only way I know to OC). Thanks, Roy Are you using Risers? might be the culprit, I suggest to install GPU's without riser first, if your mboard supports 2 PCIEx16 then install 2 GPU first within the PCIEx16 slots and resume mining, observe, add GPU's one at a time to isolate your problems. |