|
Title: Minergate only mines at half speed? Post by: befrank on November 20, 2017, 08:53:36 PM Hey Huys
Just put together a mining rig with 4 radeon rx 580 graphic cards and an asrock h110 Mainboard. Installed all the latest drivers but each of my graphic cards is only mining ether at about 11 mh/s. It should normally mine at 25/30 mh/s per card if I compare it to other people who mine. Am I doing something wrong here? We really tried everything but nothing changes? Title: Re: Minergate only mines at half speed? Post by: laineux on November 20, 2017, 09:03:10 PM Hello
Do not use minergate to mine ETH This software is not optimized at all for this coin. Even the DAG create is very long. I use claymore dual mining. Title: Re: Minergate only mines at half speed? Post by: fapar on November 20, 2017, 09:08:15 PM Hey Huys Just put together a mining rig with 4 radeon rx 580 graphic cards and an asrock h110 Mainboard. Installed all the latest drivers but each of my graphic cards is only mining ether at about 11 mh/s. It should normally mine at 25/30 mh/s per card if I compare it to other people who mine. Am I doing something wrong here? We really tried everything but nothing changes? And you reflash the BIOS with optimized timings? Made undervoltage and changed the core clock/memory clock? Correct to say that it is better not to use minergate. Quite a lot of negative feedback because of improper accounting of the share. Use Claymore and tested pools. And better use blockchain driver. Title: Re: Minergate only mines at half speed? Post by: baga105 on November 20, 2017, 09:28:48 PM Just don't use minergate.. I am talking from my own experience, where they were also stealing my hashrate... Stay away from them.. If i would have to chose between Minergate or Nicehash, i would go with Nicehash
|