Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: GPU Farm on November 21, 2017, 03:10:28 PM



Title: [HELP!!!] My two stacked H110's underhash. 1060S.
Post by: GPU Farm on November 21, 2017, 03:10:28 PM
I have two H110 motherboards that underpreform.

Upon boot, one hashes 250 M/H and the other 13 GPU board hashes 230-240m/h.


After 6-7 hours I will turn on my rig to find it at 130-140M/H each. Can someone please help me with what i am doing wrong? Upon boot, instead of running at 19M/H some cards run at 15-16m/H. Sometimes as low as 8 or 9.


Title: Re: [HELP!!!] My two stacked H110's underhash. 1060S.
Post by: fgm on November 21, 2017, 03:12:44 PM
Have you checked afterburner to see if they reseted to default settings?


Title: Re: [HELP!!!] My two stacked H110's underhash. 1060S.
Post by: GPU Farm on November 21, 2017, 03:16:46 PM
I am on Ethos 1.2.5. All I did was set my MEM/CORE to 3,000 - global fan and power to 80 and ran the overclock.


Title: Re: [HELP!!!] My two stacked H110's underhash. 1060S.
Post by: Tidsdilatation on November 21, 2017, 04:59:15 PM
Heat issue? Maybe when they get to hot they lower their TPD to not burn up? Ive had similuar issue and that was in regards to heat.


Title: Re: [HELP!!!] My two stacked H110's underhash. 1060S.
Post by: fanatic26 on November 21, 2017, 05:01:39 PM
I am on Ethos 1.2.5. All I did was set my MEM/CORE to 3,000 - global fan and power to 80 and ran the overclock.


First thing to do when you have problems is to set everything back to its stock settings and go from there. No sense troubleshooting when you are using overclocks.


Title: Re: [HELP!!!] My two stacked H110's underhash. 1060S.
Post by: MinerHeavenAustria on November 21, 2017, 05:03:24 PM
Is there an huge temperature difference ?

We know that cards can overheat but we also had an issue that our cooling solution was to good for a special 1060 rig => the cards delivered a better hashrate at a higher temperature.


Title: Re: [HELP!!!] My two stacked H110's underhash. 1060S.
Post by: GPU Farm on November 21, 2017, 06:22:43 PM
Resetting boards to Uefi defaults and updating to 1.2.7
Anyone have a similar setup by chance?