|
Title: Guiminer + phoenix, hanging Post by: jwzguy on June 29, 2011, 04:45:40 PM Several others and myself are having some issues with Phoenix under GUIminer hanging. It looks like it's related to connection problems.
I will come back and see one or two GPU's (out of many more that are still connected and working) stuck at "connecting" and sometimes they will have been stuck for hours. They will start immediately if manually stopped and restarted. This happens with 1.48 that's included in 6/14 and also 1.50. Is this a known problem? Any fix? Title: Re: Guiminer + phoenix, hanging Post by: 1.21gigawatts on June 29, 2011, 05:43:59 PM this means you overclocked your cards too high, try lowering the clock speeds. If you don't overclock, it means you have a temperature problem
Title: Re: Guiminer + phoenix, hanging Post by: tonto on June 29, 2011, 08:35:38 PM well that's weird, because I had the same issue, only I rebooted my computer, and it's been idle all day, so my temps should be back down to ambient, but I get the same issues, (ie, it won't start even after being idle forever). I haven't had a chance to get home to see in person, this is all remote so far. So in case my cards went kaput, I'm at least getting video over RDP. :)
Soon as I get home I'll try to launch a video game and see what's up. It is getting super hot here in kansas, maybe my AC died at my house... but won't know anything until I get home :( so meanwhile I'm not generating any btc :( Title: Re: Guiminer + phoenix, hanging Post by: joker on July 03, 2011, 07:12:42 AM I'm starting to have the same issue. I have 3 5830s mildly overclocked running the same speed. One card will sometimes get up to 71C max but it usually isn't the one that craps out. Sometimes it happens to all 3 and other times it will just happen to one or two. Guiminer will say "connecting" and stay like that until I hit stop/start. Then it's fine again.
Title: Re: Guiminer + phoenix, hanging Post by: 1.21gigawatts on July 03, 2011, 08:02:02 AM 1) lower the core clock by 5 MHz 2) press start button to begin mining again 3) check a few hours later to see if it still says "connecting" If not, you're golden, if it still says connecting, go back to step 1 and repeat Title: Re: Guiminer + phoenix, hanging Post by: V4Vendettas on July 03, 2011, 02:21:25 PM I'm having the same thing with my 5850's except I have them running as hard as I can (900MHz).
Works all night fine but then the sun comes up and I start having one drop out. It's never the hotest GPU either wierd. I dont want to bring the core clock down so I guess my only option is to try and improve airflow ? |