Bitcoin Forum

Setting a Static IP Address for Baikal X10 Miner Tutorial

-Insert SDCARD to the card reader.
-Check the driver name of the card reader. (Mine is "E".)
-Run "MinerIpConfig" software.
-Select the driver.
-Select "Read" option and click "Read" button.

https://i.hizliresim.com/LO67PJ.png

-Do the same in the image
-Select "Write" option and click "Write" button.
-You can insert the SDCARD into the Orange Pi Zero.
-All done !

Note: Dont forget to set different local IP addres for each different Baikal X10.

Software Download Link: https://github.com/baikalminer/tools

Turkish: https://bitcointalk.org/index.php?topic=2456400

So you need static ip for a miner when you have more than one miner or for what reason?

Normally, you need a static ip for miners.
If you want to use a static ip, you can use it. it is optional.

but miner can assign ip automatically via dhcp, right?

This help a lot .
Waiting for my second batch baikal X10 now.
Yeah
Can you show the profit ?It works good?

Yes, the miner can assign IP automatically in DHCP mode.
DHCP mode is the default mode.

But you can change the DHCP mode to static IP mode.
Setting a static IP to the miners help you manage to the miners easily if you have many miners on your mining farm.

Around 44 USD daily profit.

Baikal team makes the best miners. Review is coming....

Igotek, I have read your thread. As i understand x10 comes with micro sd card in the minber? Girst part is clear for me, however I can't unserstand how to write static ip into that image. You wrote:

"-Do the same in the image
-Select "Write" option and click "Write" button.
-You can insert the SDCARD into the Orange Pi Zero."

Where can i find that image and how it should be done? Can you explain me? Thank you.

There is a SDCARD in the Orange Pi Zero.
The Orange Pi Zero is installed in the Baikal X10.
You have to remove a few screw and open the Baikal X10.
You will see the SDCARD. Just put it to the computer via a card reader.

thanks, i understand that. So after i have taken sd card from the baikal miner i have to do those steps:


-Insert SDCARD to the card reader.
-Check the driver name of the card reader. (Mine is "E".)
-Run "MinerIpConfig" software.
-Select the driver.
-Select "Read" option and click "Read" button.

and then what?

I have used your instruction and set the static IP.
it is good if you have a lot of miners.
thanks

@tomwrx

Write the details at the image that I attached then write them into the SDCARD.
You have to write your local network informations.

Thanks, now i get it :) sorry for so many questions ;)

I have tried set static to baikal X10, but after reboot it is not inviaible in my network.
How can i recover it to first state?

Does this tool only work with Giant X10 images?  I tried using it with a Giant B (BK-B) and it gave me the same errors as in the picture in the first post.