|
Title: Crimson Driver 17.10.3 and Afterburner Post by: treanski on November 26, 2017, 08:11:04 PM I want to add more thant 8 Gpus(rx580) to my Win10 Rig. Is there anyway to get afterburner working with this driver? undervolting/overclocking in sgminer dont working too. i tried also Crimson Driver 17.11.1 -.2 but the same result
Title: Re: Crimson Driver 17.10.3 and Afterburner Post by: baga105 on November 26, 2017, 08:27:17 PM You can try with Beta version of Afterburner or just use OverDriveN tool to undervolt..
Title: Re: Crimson Driver 17.10.3 and Afterburner Post by: treanski on November 26, 2017, 08:33:54 PM You can try with Beta version of Afterburner or just use OverDriveN tool to undervolt.. i tried nttool and afterburner final and beta 21... Title: Re: Crimson Driver 17.10.3 and Afterburner Post by: Vann on November 26, 2017, 08:34:03 PM The problem with Afterburner 4.4.0 final and the Crimson Relive 17.1x.x compute drivers seems to be related to using the pixel patcher.
https://forums.guru3d.com/threads/afterburner-fails-to-display-clocks-on-patched-crimson-17-10-drivers.417926/ Unfortunately with RX 470/480 and 570 cards you must uses the pixel patcher to bypass the driver signature check when using a modded Bios. With most RX 580's you don't need the pixel patcher. I reverted back to using the blockchain drivers on Windows 10 v1703 and Afterburner is working. https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx Title: Re: Crimson Driver 17.10.3 and Afterburner Post by: treanski on November 26, 2017, 08:43:16 PM i didnt patched the new drivers...and reverted back too for now. but i need to get this working, dont want to use linux
Title: Re: Crimson Driver 17.10.3 and Afterburner Post by: bluspirit on November 26, 2017, 09:14:09 PM I'm using MSI RX 580 + win10 FCU + 17.10.3 drivers (this version works fine for me).
After I installed atikmdag-patcher-1.4.5 I can overclock / undervolt the cards directly from Claymore miner (v.10.0 / 10.2 eth, v.12.6 zec, does NOT work with v.10.1 eth). Title: Re: Crimson Driver 17.10.3 and Afterburner Post by: nickcas on December 01, 2017, 09:06:55 PM The problem with Afterburner 4.4.0 final and the Crimson Relive 17.1x.x compute drivers seems to be related to using the pixel patcher. https://forums.guru3d.com/threads/afterburner-fails-to-display-clocks-on-patched-crimson-17-10-drivers.417926/ Unfortunately with RX 470/480 and 570 cards you must uses the pixel patcher to bypass the driver signature check when using a modded Bios. With most RX 580's you don't need the pixel patcher. I reverted back to using the blockchain drivers on Windows 10 v1703 and Afterburner is working. https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx Just signed up to thank you for this post. I figured out that I had to roll back my driver to the Crimson Relive 17.8.2 http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-17.8.2-Release-Notes.aspx (http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-17.8.2-Release-Notes.aspx) (the one you linked to is bugged for me and others according to the patch notes) to keep the Afterburner compatibility. Although I will say that I had this issue with the RX 580s, so I don't think it has to do with the pixel patcher since, as you said, you don't need to use it to mod your bios. Seems like it's an issue with Afterburner but obviously I can't know for sure. |