Bitcoin Forum

https://farm5.staticflickr.com/4572/37778522475_16cdbc8e8a.jpg
Hey guys originally I took my farm the direction of max density so I've ended up with a lot of 1080 TI's, but it left my farm very Equihash and lyra heavy, making the recent great opportunity of mining ETH again (with them delaying ice age and the price increase) not really an option for me. .  I've read a lot of back and forth on the 3gb. . figured I'd give them a shot! Deleted any extras and built this mining rig with just the essentials and goals of max profits/fast ROI

There's always room for improvement, if there's something you'd recommend that would be better than what I did, or used, or better OC settings please let me know I'm always open to constructive feedback!

https://www.youtube.com/watch?v=cxBYbAAtXWA
https://i.imgur.com/1pWtaaKl.png

FULL 12 1060 MINING RIG BUILD PART LIST - available to buy on Amazon
1060 3gb
http://amzn.to/2zqtcGQ (Shown)
http://amzn.to/2i8PkCq (Cheaper)
http://amzn.to/2zsOiEP (Alternative)
http://amzn.to/2A6MLY6 ($25 rebate atm)
PCIE Risers
http://amzn.to/2hUHeJK
Motherboard
http://amzn.to/2iT63qy
http://amzn.to/2zqUMny (Alternative seller)
CPU
http://amzn.to/2AatLZe
Ram
http://amzn.to/2A8rJrV
USB Harddrive
http://amzn.to/2zqwlGS
http://amzn.to/2Ad58bG (Better price Alt.)
Mining Shelf Rack
http://amzn.to/2zpnjtx (Black)
http://amzn.to/2ztA5HD (Silver)
PCIE 1x 6 pin to 2x 6+2 pin
http://amzn.to/2i5vJ65
Zip Ties
http://amzn.to/2zqZgdO
Arctic Silver Kit
http://amzn.to/2AdY2nC
Power Supplies
http://amzn.to/2zpMFHY 750w EVGA
http://amzn.to/2zpn0yR 1200w EVGA
https://goo.gl/KscTaE 750w Server
https://goo.gl/myJZqV 1200w Server (Gold)
https://goo.gl/5G6pHU Pico PSU ATX Adap.
Add2PSU
http://amzn.to/2hVFKiw
Powerline Ethernet Adapter
http://amzn.to/2hRGNjw
Felt Pads
http://amzn.to/2A9ykmv
Download smOS
https://goo.gl/jMxTSS
Download HDD Raw Copy
http://www.mediafire.com/file/2ccebvpyuv87r35/HDDRawCopyToolSetup.exe

//

VoskCoin Official Donation Addresses, support appreciated!
BTC - 12PsgKuhcJrEqJbD3oMN7rcEcuyqyqRznL
ETH - 0xDEe6A2ae293F8C58Ef71649658344BbF382b6e70
ZEC - t1WRoxHVh8vhDJxAr6vpP4zzj3xHGF9ZbgQ
ZEN - znb1iNFP6VctF2AhXLXtMsSjP7emvYDmeXR
VTC - VdeggL7drzbYeB2eedDeDYe9xPwtPXW8KG
KMD - RCbKFSQhNWCqSwuFY8cGwzhDk8zMdYkjDj
Doge - DHgX7vJjBsmYcB1GgubGtu3TVJkqQgCG6B
XMR - 484HoyS4h2fenvLKQkuUV7FwnJaGK8LMX43tiJ3UZdVU53d2MxFiQ1jbSfyorsXZVs1SvoPVh4nipjd 7b4GVgFGmCgygdpV

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to http://Amazon.com and affiliated sites.

Vosk,
Great post and great video.
Got time for a question or two?

I've been watching your videos and dude they are 'top tier' for us n00bs.

I am replicating CryptoChicks 1070 TI build.
I have the 13 GPU asrock motherboard and a 1200 parallel miner server PSU.

Problems: (with the 100% server PSU in mind, not ATX)
1. Can you clarify exactly what cable/adapter you use for the CPU/8 pin EPS slot on the asrock MB?
2. Noting the 6 pin PCIE cables that come with the server PSU, what specific adapter did you use to power the "2" molex ports on the motherboard?

Lastly, you and Quintleo refer to afterburner OC settings. Would you mind sharing the settings that you throw into the 1bash (NVOC) clock/memory settings for your 1070 ti rig?

Thanks again and keep up the great work!

haha appreciate that brother

I've actually been having an issue with that, going to order a couple adapters here soon to figure it out
https://www.newegg.com/Product/Product.aspx?Item=9SIA85V3DK6375&ignorebbr=1&nm_mc=KNC-GoogleMKP-PC&cm_mmc=KNC-GoogleMKP-PC-_-pla-_-Cables+-+Internal+Power+Cables-_-9SIA85V3DK6375&gclid=Cj0KCQiA6enQBRDUARIsAGs1YQjkYn5zLt0WbLbFPv_Pxjs77Zefx4wN9oPytaWE3hbuuRlDF-kOKPkaAshiEALw_wcB&gclsrc=aw.ds i was looking at something like this, this exact one might be too short though to reach the distance between the 2 molex ports on the board. . will update when I figure it out

@citronick powers a lot of boards with just the 4 pin off a pico psu atx adapter in either the left 4 or the right 4 of the 8 pin slot, there's also 4 pin to 8 pin adapters which I have but didn't get to see if it worked because the board wasn't working with just one molex plugged in

https://goo.gl/5G6pHU atx adapter
https://www.amazon.com/StarTech-com-8-Inch-ATX12V-Extension-ATXP4EXT/dp/B000O7WFHA 4 pin to 8 pin cpu

I don't have a pic at the moment but I am using 4-pin ATX of the Pico for H110 and it works fine. It goes to the left 4 pins (if you are looking at it directly), but you do need to power both Molex for the MB to work with multiple GPUs. Any Molex to 2x Molex adapter will work.

https://farm5.staticflickr.com/4579/26889699269_059d218503_z.jpg

So just to double check, the 4 pins closest to the CPU fan? which pico are you using / what wattage is it rated for?

I know you're certainly knowledgable on this -- what are your thoughts on the different wattage ratings for the picos? ex 160w vs 180w etc and whats the best rec for rigs? especially where it's a bit more demanding with a board requiring 2x molex like this

Yes, 4-pin closest to CPU/CPU fan connector. I am using 160 watt version and had it modded by flminer here. I must say he did a great job by adding a 6-pin and 8-pin (for MB ATX). I am using 4-pin for the SRR to work, I can use 8-pin but then SRR doesn't work for some reason. I am using 2400 watt parallel miner PSU to power 11 1080 Ti. I couldn't addd more because the shoe rack I am using doesn't have room, lol. I am running 13 1070s (Zotac minis) on the same setup though.

Here is a picture of 11 1080Ti on a shoerack I took a few weeks ago.

https://i.imgur.com/nJSSTMC.jpg

haha nice shoe rack, i did the same with mine for my vega rig.

what are you using for the beam that your fixing your card screws onto?

1/2"x4' aluminum bar from Home Depot. Was feeling too lazy to make a frame after I saw this shoerack, lol.

i have my 1060's set at 58% power limit and they run under 70 watts therefore i use unpowered 30cm 16-1 risers, also use them on 470/570 which run about 100w. this is because they get their power from psu and there are 4-pin connectors on the motherboard. i've had no problems with risers. i think usb risers are only needed on higher power cards and motherboards that don't have the additional power connectors.

That's really interesting, do you have a link to the ones you use or something similar? what are your cost savings

hahaha this is so awesome, whats the price on the shoerack?

about $15, not bad at all

https://smile.amazon.com/Honey-Can-Do-SHO-01600-Bamboo-2-Tier-Shelf/dp/B00302KB4K/ref=sr_1_2?ie=UTF8&qid=1511805775&sr=8-2&keywords=Honey-Can-Do+SHO-01600 (this is a charity I support through my Amazon purchases)

Can you confirm if your 12 Cards have Samsung Memory ?

I found this EVGA model for 200 bucks.
ANd i hesitate with Zotac AMP model.

3GB is not a problem now ?

The H110 BTC+ Pro boards have some kind of sensor for occupied PCIe ports. I have trouble with more then two risers connected even with two molex connectors powered. But the connectors are really needed only if you are not using powered risers. I simply disabled the warning in BIOS and as for now board is working like charm with 8 GPU WITHOUT any molex connected, with only 4-pin for CPU power and 160W picoPSU. So feel free to have a bit less cable hassle with the mainboard :-)

First off... big thanks to all miners posting in this thread.

BSAlex,
Dude... your post was awesome.
I gotta admit this server PSU + asrock 110 motherboard was starting to drive me nuts.
I have molex adapters coming in the mail... but staring at all these 1070 ti's not functioning was getting on my nerves. Your idea to go into the BIOS and shut off the hardware warning was great!
The rig fired up with all my GPUs online... with -no- molex power adapters and running completely off server PSU, following Vosk's 1070 ti build.

Hats off to all of you, this is a really good community.

Cheers.

That’s so awesome to hear, that’s what it’s all about man!

I can add it to the to do list but just because mine may be doesn’t guarantee a different order will be unfortunately. However at least it is a possibility!

Ah you’re a genius mate, going to give this a spin

Such a good job with the build and video.  Subbed on YT and buying through your links. Thanks for sharing!

This is very good indeed. .. in assembling this already in the include video. So it's a little easier to understand. .. Thank you

In Oz we pay $278 for a 1060 6GB or $203 for a 1060 3GB

which would you go for in an 8-10 card rig?

I got same GPU (EVGA 3GB SC) and all have Hynix... not samsung as you said...

that's awesome man thank you and thanks for supporting the channel!

thanks my man glad I could help!

it depends what your goals are, I don't think you could really go wrong with either and those aren't bad prices all things considered

personally i'd try to build both eventually xD

I didn't say it was a guarantee! still great on other algos, some people have reported receiving samsung not all unfortunately

What do you recommend dual fan or single fan?

The DAG file for ETH will exceed 3gb on 04/MAY/2019, it wont exceed 6gb until 03/OCT/2024.  so 3gb cards will be no good for ETH in 1.5yrs but 6gb cards will be good for 7 years. It is worth the ~50-75$ per card (if you have the money for that) to buy 6gbs and get the extra 5.5 years of possible productivity

On the topic of this I'm sure most know now but just wanted to update that 3gb on windows builds are no longer working due to the DAG file for ETH mining