Title: Is my Antminer S9 running fine? Post by: bitcoinforever2 on November 27, 2017, 09:24:41 PM https://i.imgur.com/ioRYqla.png
So I have moved the Antminer to a new room that is quite hotter. I am puzzled by the numbers above and wondering if it's fine. My question2: 1) My HW error rate is 0.0010%... It used to be at 0.0004% over the past few weeks, should I be worried? 2) Chip temp 82-79-82, is that worrisome? Too high? 3) Fan #6 is always running at 6,000 RPM. Is that a problem? Can it run at that speed forever and is it bad for the miner? Overall the air flow is good but I'm just worried I am killing my antminer. TYVM!!!! Title: Re: Is my Antminer S9 running fine? Post by: unholycactus on November 28, 2017, 02:08:22 AM Everything seems fine to me. You'll get more hardware errors the hotter it is, but 0.001% isn't very significant.
Title: Re: Is my Antminer S9 running fine? Post by: NotFuzzyWarm on November 28, 2017, 02:25:35 AM Dude, set aside an evening and skim through the s9 thread (https://bitcointalk.org/index.php?topic=1493601.0). You have questions? ALL been answered multiple time in there....
Title: Re: Is my Antminer S9 running fine? Post by: philipma1957 on November 28, 2017, 02:32:53 AM https://i.imgur.com/ioRYqla.png So I have moved the Antminer to a new room that is quite hotter. I am puzzled by the numbers above and wondering if it's fine. My question2: 1) My HW error rate is 0.0010%... It used to be at 0.0004% over the past few weeks, should I be worried? 2) Chip temp 82-79-82, is that worrisome? Too high? 3) Fan #6 is always running at 6,000 RPM. Is that a problem? Can it run at that speed forever and is it bad for the miner? Overall the air flow is good but I'm just worried I am killing my antminer. TYVM!!!! watch your heat but you are still okay. Hw 0.01 is too high Hw 0.001 is okay for every 1000 dollar you would earn you lose 1 dollar at the current rates temps under 100 are okay temps under 95 are better temps under 90 are good your temps are under 85 that is very good. Title: Re: Is my Antminer S9 running fine? Post by: bitcoinforever2 on November 28, 2017, 03:55:19 AM Dude, set aside an evening and skim through the s9 thread (https://bitcointalk.org/index.php?topic=1493601.0). You have questions? ALL been answered multiple time in there.... Hey sorry about that - I did searched a lot, but all posts I have discussed the PCB temp, and I don't have that on my antminer. Similarily, they said around 60 degrees was better but I don't have chip 1. Other than that, I am concerned about fans running at 6,000 RPM at all time. Anyway, thank you all the answers! :D <3 Title: Re: Is my Antminer S9 running fine? Post by: bitcoinforever2 on November 28, 2017, 04:16:09 AM Final question: if I restrict the airflow a bit, I cut the noise by a significant portion BUT all temps go up 2-3 degrees. Should I do it or is it too dangerous?
Title: Re: Is my Antminer S9 running fine? Post by: fanatic26 on November 28, 2017, 05:02:06 PM Your temps are very low, you have nothing at all to worry about. These things dont even shut off until you have passed 110 degrees chip temperature.
I wouldnt begin worrying about heat until you hit 100 on the chips. As far as reducing flow, how are you doing it? If you are reducing it improperly and creating a bunch of drag you will kill your fans quicker. Running your fan at 6000 rpm is fine, that is what they are built for. |