Title: 2Card Setup freezes after random time Post by: qiuness on July 02, 2013, 04:48:00 PM Hello guys...
Maybe you encountered this before. I have a PC with 2 7950's running stock.. that means i did absolutely nothing to them from a tweaking perspective. The problem is.. they freeze the PC. I use them with 2 16x-16x risers. So far i tried 1. exchanging the risers... no help 2. reinstalled windows... no help 3. exchanged cards between them... no help I`m running 12.8 Drivers with CGMiner 2.11.4 Temp is max 80C What i can still try is: -> Latest drivers...and maybe i don't know.. use a 3rd card as a primary card..i`m out of ideas. Title: Re: 2Card Setup freezes after random time Post by: Arkanine on July 02, 2013, 06:17:55 PM 80° is so much, try to use a additional cooler; try to get about 70-72°. Overheat is a reason.
Title: Re: 2Card Setup freezes after random time Post by: Damnsammit on July 02, 2013, 06:19:42 PM What PSU are you using? I had this problem when running 2 cards at a higher intensity than 14 with an old 630W PSU. Swapped out to a 850W and all is fine.
Been trying to blow up an old 5850, and it runs between 85-95ēC all the time. Been fine going 24/7 for the past few weeks, so I really doubt overheating is the issue. Title: Re: 2Card Setup freezes after random time Post by: TheSwede75 on July 02, 2013, 06:24:51 PM Thank you for posting this in the correct forum. Cause this is the 'Hardware' sub-forum right?
Title: Re: 2Card Setup freezes after random time Post by: Arkanine on July 02, 2013, 06:26:23 PM @Damnsammit, my 5850s go dead if they only go above 72°, however PSU can easily work with five 5850s. I dont know where are your 5850s from :))
Title: Re: 2Card Setup freezes after random time Post by: Damnsammit on July 02, 2013, 06:41:20 PM @Damnsammit, my 5850s go dead if they only go above 72°, however PSU can easily work with five 5850s. I dont know where are your 5850s from :)) Really? Mine gets sick after it gets above ~92, but then I just have CGWatcher restart it and it works fine. I know that thing is about to crap out, so I am not too concerned with it. Got it in like 2010 so it's had a good run lol Just focusing on making sure the 6950 stays healthy. My PSU was a 630 Antec from a long time ago and it would crash with the two cards. I think it was something to do with current, but I don't know. I used it as an excuse to get a 850W for $60 on CL lol Title: Re: 2Card Setup freezes after random time Post by: qiuness on July 02, 2013, 07:46:01 PM i've got an antec 1200W and this is the second PSU...
I`ll try to get the temp down, but it's strange that it freezes the PSU Title: Re: 2Card Setup freezes after random time Post by: Damnsammit on July 02, 2013, 08:15:21 PM i've got an antec 1200W and this is the second PSU... I`ll try to get the temp down, but it's strange that it freezes the PSU Definitely shouldn't be a lack of power then. When are they freezing? After you run cgminer succesfully? Have you tried them with GUIminer? Same results? Title: Re: 2Card Setup freezes after random time Post by: qiuness on July 04, 2013, 09:21:33 PM Solved it apparently by swapping the card with each other and changing the risers
|