|
Title: GPU Stock Setting, GPU Temp, Fan question Post by: puremage111 on December 04, 2017, 04:14:18 PM I am currently mining with
PowerColor Red Devil RX 470 x 5, 1 Faulty GPU where i didn't run previously So, i was mining okayish until just now where i updated my Radeon until it couldn't detect my GPU. Then i reinstall the existing driver to the old version but my setting just got messed up I am currently running 6 GPU. 1 Fault GPU where it always crash My previous setting was all good as the shopkeeper flashed and all could run 26-27 mh/s stable except for the 1 Faulty GPU. Hence after all the driver reinstall, My MSI Burner setting got messed up! The current Core Voltage and other Setting : Remain from where i set Core clock : Drop to 600 Mhz I wanted to set the Faulty GPU back to its clock setting so i can try to run without crashing it 1)Is there anywhere i could check the clock setting for this GPU? 2)Is running 6 Rx470 powerdraw 830W (from smartplug - from wall) good? 3)Is GPU Running at 75C, 50% Fan speed good? Or should i make the fan faster Thanks |