|
Title: Powering GPU mining rigs Post by: nerdralph on December 07, 2017, 02:49:47 AM Most of what I've written about is stuff the old farts already know, but it should help newbies with at least a couple clues to rub together.
http://nerdralph.blogspot.ca/2017/12/powering-gpu-mining-rigs.html Title: Re: Powering GPU mining rigs Post by: wacko on December 07, 2017, 05:49:05 AM Most of what I've written about is stuff the old farts already know, but it should help newbies with at least a couple clues to rub together. Thanks. There was a topic here just about this recently, someone was asking how to power the risers and the cards with 2+ PSUs the right way. As I understand it, it doesn't matter with the usb risers (it did matter only with the old ribbon ones)? So we can power the riser with one PSU and the card that goes in that riser with another? Or is using the same PSU for both the riser and the gpu is still better even with usb risers?http://nerdralph.blogspot.ca/2017/12/powering-gpu-mining-rigs.html Title: Re: Powering GPU mining rigs Post by: nerdralph on December 12, 2017, 07:48:10 PM Most of what I've written about is stuff the old farts already know, but it should help newbies with at least a couple clues to rub together. Thanks. There was a topic here just about this recently, someone was asking how to power the risers and the cards with 2+ PSUs the right way. As I understand it, it doesn't matter with the usb risers (it did matter only with the old ribbon ones)? So we can power the riser with one PSU and the card that goes in that riser with another? Or is using the same PSU for both the riser and the gpu is still better even with usb risers?http://nerdralph.blogspot.ca/2017/12/powering-gpu-mining-rigs.html The issue is tying the 12V lines from 2 PSUs together. With server PSUs its usually no problem as they are designed to load share, but not for most ATX PSUs. Even the ribbon risers are OK to power separately if you cut the 12V lines. Title: Re: Powering GPU mining rigs Post by: m1n1ngP4d4w4n on December 12, 2017, 08:05:32 PM As usual sir, very interesting stuff, even for old farts, thanks ! 8)
|