|
Title: APW3++ psu problem Post by: phil1976 on December 07, 2017, 10:35:32 PM i have my new S9/apw3++ rigged and i have no output on the psu i try 120v and 240v and noting no output. any suggestions
Title: Re: APW3++ psu problem Post by: phil1976 on December 07, 2017, 11:42:04 PM can the psu enter a lock state if current is 243Vac at the input.
Title: Re: APW3++ psu problem Post by: bsp on December 08, 2017, 02:25:16 AM PSU is probably NFG.
Happened with one of my original APW3++ too. Had to return it. - Try to start with just Control board connected (no hash board connected to power), if it works, try with just one hashboard connected. - If you are using a powerbar, check power bar's fuse. - Try power outlet on different circuit. - Try using alternative power supply if available. |