Title: Antminer S9 - Error Post by: RfBTC on December 08, 2017, 12:50:09 AM Hi, guys i am experimenting a weird error with my S9, it keep re-starting & No showing info in the Miner Status tab ??? ??? http://imgup.nl/images/2017/12/08/S9_NoMinerStatus.png Title: Re: Antminer S9 - Error Post by: bsp on December 08, 2017, 12:59:41 AM Try to do Hard reset. It may help:
https://enforum.bitmain.com/bbs/topics/3957 Title: Re: Antminer S9 - Error Post by: VRobb on December 08, 2017, 01:09:30 AM What psu are you using?
Title: Re: Antminer S9 - Error Post by: RfBTC on December 08, 2017, 04:47:02 AM Hi guys.... in the log file.... it's appear " ASIC RT error: (asic index start from 1-63) " . PSU is APW3++ (1600W) BITMAIN Official Hard Reset you mean the button in the front ? thanks Title: Re: Antminer S9 - Error Post by: bsp on December 08, 2017, 06:36:56 AM Hi guys.... in the log file.... it's appear " ASIC RT error: (asic index start from 1-63) " . PSU is APW3++ (1600W) BITMAIN Official Hard Reset you mean the button in the front ? thanks There are 3 ways to reset S9. I gave link earlier: https://enforum.bitmain.com/bbs/topics/3957 Use the last version (Power off, power up while holding IP button for 5 seconds, release - unit restarts with factory settings) I hope it helps. Title: Re: Antminer S9 - Error Post by: majdi105 on December 08, 2017, 10:57:45 AM just change the pool and fill all the 3 pool
Title: Re: Antminer S9 - Error Post by: RfBTC on December 08, 2017, 03:40:23 PM Hi , guys my S9 AntMiner version its has the SD card slot on the left of the Ethernet interface.
I have tried Soft-Restore and IP Reporter Restore and its keep no showing-data un Miner Status Tab ??? ??? Pool data are 3 slots filled and in Kernel Log appear this..... Code: bmminer not found= 1876 root 0:00 grep bmminer Miner keep restarting in a loop ! Any idea ??? thanks! http://imgup.nl/images/2017/12/08/AntMiner_S9.png Title: Re: Antminer S9 - Error Post by: bsp on December 09, 2017, 05:32:50 AM Try to connect Miner DIRECTLY to your main internet Router!!!
Without switch or other secondary device. Directly into your main router. Title: Re: Antminer S9 - Error Post by: VRobb on December 09, 2017, 05:37:32 AM Pretty obvious you're missing files needed to run the miner. Says so right in your kernel log, "bmminer not found"
What bsp says is irrelevant since you're not fully booting up. Title: Re: Antminer S9 - Error Post by: RfBTC on December 09, 2017, 02:50:43 PM Try to connect Miner DIRECTLY to your main internet Router!!! Without switch or other secondary device. Directly into your main router. I dont think that will be de solution.... i have L3+ and D3 connected with switch.... and works perfectly... L3+ / D3 has Cgminer by default.... each time i make IP Report Reset, its works and my internal S9 IP is different, the matter is not the connection The matter is the BMminer, someone could got another alternative solution than bmminer-cgminer492 "Zwilla" update ? ??? thanks Title: Re: Antminer S9 - Error Post by: cableiso on December 09, 2017, 03:00:54 PM Grep bmminer not found means it crashed upon start of mining. This is a popular problem these days, and I suspect it's a power supply issue.
Are you using apw3 on 110v? |