Bitcoin Forum

Bitcoin => Mining support => Topic started by: rotem8866 on December 11, 2017, 04:19:54 PM



Title: New Antminer S9 - HW & Temp quastions
Post by: rotem8866 on December 11, 2017, 04:19:54 PM
New Antminer S9 - HW & Temp quastions

Hi all ,
sorry if my question are newbies... today i received my new antminer s9 and will like to know if status is like expected.
HW - one of the board shows 76 - what its mean ? what i need to check ?
Temp - my temps are optimal ? what about the missing values on Temp(Chip1)

see pic attached
Thanks!
https://imgur.com/a/Z8FxZ


Title: Re: New Antminer S9 - HW & Temp quastions
Post by: VRobb on December 11, 2017, 04:46:38 PM
Your percentage of HW errors is only 0.0002% so there's no worries here.  One of my boards gives much more HW errors than the others, the total overall is what matters and you're fine!
Mine ON!  8)


Title: Re: New Antminer S9 - HW & Temp quastions
Post by: CryptoYYZ on December 11, 2017, 09:48:35 PM
New Antminer S9 - HW & Temp quastions

Hi all ,
sorry if my question are newbies... today i received my new antminer s9 and will like to know if status is like expected.
HW - one of the board shows 76 - what its mean ? what i need to check ?
Temp - my temps are optimal ? what about the missing values on Temp(Chip1)

see pic attached
Thanks!
https://imgur.com/a/Z8FxZ

What are the temperatures of the other chips?  76 is running a bit high and will have your fans maxed out.  Depending on the country you live, its a cooler season in the western world, considering feeding some outdoor air into your unit and perhaps using a shroud and flexible ducting to redirect the warm air away.

It is perfectly normal to have some boards come up 3-5 degrees off in my experience.