|
Title: Rx580 hash rate plummets after switching to SMOS Post by: technicalsis404 on December 12, 2017, 10:59:29 PM Set up 6x Powercolor Rx580 8gb on windows with claymore. Windows is just too unreliable, so opted to go to Smos.
On windows, I flashed in modded bios to the cards and was getting 30mh/s. Didn't do any additional OC's In SMOS, the rate is now 21-22mh/s for each card. I presume the bios flash is still in place, so why wouldn't I be getting the higher hash rates? Any tips? Thank you for any suggestions I appreciate them. Title: Re: Rx580 hash rate plummets after switching to SMOS Post by: Vann on December 12, 2017, 11:04:06 PM Make sure to apply the dag fix after you flash smOS and boot in to your web console.
https://www.youtube.com/watch?v=jClPnZxSjFU&feature=youtu.be&t=111 Title: Re: Rx580 hash rate plummets after switching to SMOS Post by: technicalsis404 on December 13, 2017, 11:33:11 AM Make sure to apply the dag fix after you flash smOS and boot in to your web console. https://www.youtube.com/watch?v=jClPnZxSjFU&feature=youtu.be&t=111 Thanks i'll try that Title: Re: Rx580 hash rate plummets after switching to SMOS Post by: Xazax310 on December 13, 2017, 01:21:24 PM Make sure you have your Overclocks and Power State set! SMOS uses different power states. So if you hard modded your BIOs to your OC settings for windows at P7 state you MUST set the P7 state in SMOS. If you did not hard mod your BIOs. Just ensure you set a P-state(1-7) 2 Usually works well then set your overclocks.
|