|
Title: Anyone use Asus B350F-Strix? Post by: ysakay on December 15, 2017, 12:09:19 PM Hi guys.
I have a Asus b350f gaming,ryzen 7 1800 x and 5x Sapphire Spec 580. I installed windows 10. But system only work "1" gpu. I check the device manager and there is only 1 rx 580. Try to atimag patcher,it doesn't work. I updated bios,it's doesn't work. How can i worked with 5 gpu? Title: Re: Anyone use Asus B350F-Strix? Post by: GuerreiroDF on April 26, 2018, 03:28:04 PM I have the same problem
See https://forum.ethereum.org/discussion/11804/rog-strix-b250f-gaming-motherboard-for-eth-mining/p2 Title: Re: Anyone use Asus B350F-Strix? Post by: GuerreiroDF on April 26, 2018, 03:42:59 PM Hi guys. I have a Asus b350f gaming,ryzen 7 1800 x and 5x Sapphire Spec 580. I installed windows 10. But system only work "1" gpu. I check the device manager and there is only 1 rx 580. Try to atimag patcher,it doesn't work. I updated bios,it's doesn't work. How can i worked with 5 gpu? Do you solved the problem? Title: Re: Anyone use Asus B350F-Strix? Post by: Set Ready Go on April 26, 2018, 03:55:06 PM Hi guys. I have a Asus b350f gaming,ryzen 7 1800 x and 5x Sapphire Spec 580. I installed windows 10. But system only work "1" gpu. I check the device manager and there is only 1 rx 580. Try to atimag patcher,it doesn't work. I updated bios,it's doesn't work. How can i worked with 5 gpu? Do you solved the problem? Tell us what system you have.
Title: Re: Anyone use Asus B350F-Strix? Post by: GuerreiroDF on April 26, 2018, 03:59:21 PM I can not use 2 RX on the board. A bios only recognizes PCIe 16_1
Motherboard: Asus B350F-Strix BIOS version? Version 4009 2018/04/17 What have you done? What risers and psu do you have? No Risers. 2 RX 570. PCIe slot 16_1 and PCIe 16_2 version of windows? Windows 10 64 btis Title: Re: Anyone use Asus B350F-Strix? Post by: Set Ready Go on April 26, 2018, 04:15:49 PM I can not use 2 RX on the board. A bios only recognizes PCIe 16_1 Motherboard: Asus B350F-Strix BIOS version? Version 4009 2018/04/17 What have you done? What risers and psu do you have? No Risers. 2 RX 570. PCIe slot 16_1 and PCIe 16_2 version of windows? Windows 10 64 btis Aha i see, it should work out of the box then... do you have a ryzen cpu installed or a 7th Generation A-series/Athlon? If you have a Ryzen installed you should be able to run at x8 + x4 If you dont have ryzen it wont work. Title: Re: Anyone use Asus B350F-Strix? Post by: GuerreiroDF on April 26, 2018, 04:35:06 PM Ryzen 5 2400.
Title: Re: Anyone use Asus B350F-Strix? Post by: GuerreiroDF on April 26, 2018, 04:42:14 PM My board have:
2 x PCIe 3.0 x 16 SafeSlots (CPU) 1 x PCIe 2.0 x 16 slot (PCH) 1 x PCIe 2.0 x 1 slots (PCH) Is it setup in bios? You know how to do?? Title: Re: Anyone use Asus B350F-Strix? Post by: Set Ready Go on April 27, 2018, 07:01:55 AM My board have: 2 x PCIe 3.0 x 16 SafeSlots (CPU) 1 x PCIe 2.0 x 16 slot (PCH) 1 x PCIe 2.0 x 1 slots (PCH) Is it setup in bios? You know how to do?? Try and disable on board graphics in bios Title: Re: Anyone use Asus B350F-Strix? Post by: STAT303954 on January 14, 2021, 08:07:43 PM having similar issue...motherboard can see 4 gpu ok but no 5th ...ryzen 1200, 850watt psuu
Title: Re: Anyone use Asus B350F-Strix? Post by: miner29 on January 14, 2021, 11:42:53 PM Turn off the m.2 slots
Gen2 on slots x1 is all that is needed. set IOMMU to ENABLE. set VIRTUALIZATION (C1E) to DISABLE. set POWER CONTROL (SVM) to DISABLE. set CPU UNLOCK to ENABLE (this may prevent CPU temp from being read properly). set COOL AND QUIET to DISABLE. set CPU CORE CONTROL equal to the amount of CORES PER PROCESSOR for your particular CPU make/model. set ONBOARD AUDIO/SOUND (AZALIA) to DISABLE. set IEEE1394 to DISABLE. set APU ONBOARD GRAPHICS to DISABLE. set CPU FREQUENCY SCALING to DISABLE. set CPU PERFORMANCE MODE to ENABLE. set FAST BOOT to DISABLE. |