Bitcoin Forum

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 27800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 258048
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map e6fd8000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 496 pages used for memmap
[    0.000000]   HighMem zone: 63488 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256528
[    0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 884148K/1032192K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 148044K reserved, 253952K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000305] ps7-ttc #0 at f0006000, irq=43
[    0.000617] Console: colour dummy device 80x30
[    0.000655] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040208] pid_max: default: 32768 minimum: 301
[    0.040436] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.040459] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.042640] CPU: Testing write buffer coherency: ok
[    0.043001] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043063] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043287] L310 cache controller enabled
[    0.043307] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121037] CPU1: Booted secondary processor
[    0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210360] Brought up 2 CPUs
[    0.210380] SMP: Total of 2 processors activated.
[    0.210388] CPU: All CPU(s) started in SVC mode.
[    0.211051] devtmpfs: initialized
[    0.213473] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214712] regulator-dummy: no parameters
[    0.223680] NET: Registered protocol family 16
[    0.226007] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228297] cpuidle: using governor ladder
[    0.228310] cpuidle: using governor menu
[    0.235857] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237391] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237406] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237527] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.259556] bio: create slab <bio-0> at 0
[    0.261256] vgaarb: loaded
[    0.261978] SCSI subsystem initialized
[    0.262854] usbcore: registered new interface driver usbfs
[    0.263025] usbcore: registered new interface driver hub
[    0.263259] usbcore: registered new device driver usb
[    0.263783] media: Linux media interface: v0.10
[    0.263940] Linux video capture interface: v2.00
[    0.264179] pps_core: LinuxPPS API ver. 1 registered
[    0.264191] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.264313] PTP clock support registered
[    0.264668] EDAC MC: Ver: 3.0.0
[    0.265748] Advanced Linux Sound Architecture Driver Initialized.
[    0.268775] DMA-API: preallocated 4096 debug entries
[    0.268791] DMA-API: debugging enabled by kernel config
[    0.268880] Switched to clocksource arm_global_timer
[    0.290582] NET: Registered protocol family 2
[    0.291263] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.291359] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.291518] TCP: Hash tables configured (established 8192 bind 8192)
[    0.291586] TCP: reno registered
[    0.291603] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.291660] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.291937] NET: Registered protocol family 1
[    0.292298] RPC: Registered named UNIX socket transport module.
[    0.292311] RPC: Registered udp transport module.
[    0.292320] RPC: Registered tcp transport module.
[    0.292329] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292342] PCI: CLS 0 bytes, default 64
[    0.292797] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294860] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.296290] bounce pool size: 64 pages
[    0.297213] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.297417] msgmni has been set to 1486
[    0.298214] io scheduler noop registered
[    0.298227] io scheduler deadline registered
[    0.298270] io scheduler cfq registered (default)
[    0.309230] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.309250] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.433421] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.006385] console [ttyPS0] enabled
[    1.010710] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[    1.018349] [drm] Initialized drm 1.1.0 20060810
[    1.035475] brd: module loaded
[    1.044915] loop: module loaded
[    1.054542] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.060375] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.068169] libphy: XEMACPS mii bus: probed
[    1.072727] ------------- phy_id = 0x3625e62
[    1.077470] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.086405] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.093246] ehci-pci: EHCI PCI platform driver
[    1.100482] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.107288] usbcore: registered new interface driver usb-storage
[    1.114189] mousedev: PS/2 mouse device common for all mice
[    1.120339] i2c /dev entries driver
[    1.127250] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.132771] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.138653] Xilinx Zynq CpuIdle Driver started
[    1.143557] sdhci: Secure Digital Host Controller Interface driver
[    1.149747] sdhci: Copyright(c) Pierre Ossman
[    1.154020] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.160847] mmc0: no vqmmc regulator found
[    1.164856] mmc0: no vmmc regulator found
[    1.208898] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.217598] usbcore: registered new interface driver usbhid
[    1.223112] usbhid: USB HID core driver
[    1.227839] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.234139] nand: Micron MT29F2G08ABAEAWP
[    1.238106] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.244054] Bad block table found at page 131008, version 0x01
[    1.250272] Bad block table found at page 130944, version 0x01
[    1.256330] 3 ofpart partitions found on MTD device pl353-nand
[    1.262114] Creating 3 MTD partitions on "pl353-nand":
[    1.267206] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.275281] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.282602] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.291607] TCP: cubic registered
[    1.294840] NET: Registered protocol family 17
[    1.299566] Registering SWP/SWPB emulation handler
[    1.305522] regulator-dummy: disabling
[    1.309915] UBI: attaching mtd1 to ubi0
[    1.835298] UBI: scanning is finished
[    1.846978] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.854058] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.860820] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.867483] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.874362] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.880342] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.887449] UBI: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1984962504
[    1.896491] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.905710] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.905716] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.909815] ALSA device list:
[    1.909818]   No soundcards found.
[    1.926164] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.989260] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.995186] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.004327] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.014205] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.019282] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 56FDF5FA-8D29-4AA7-95D4-1C2E28C7C4E9, small LPT model
[    2.030775] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.038184] devtmpfs: mounted
[    2.041317] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.895566] random: dd urandom read with 0 bits of entropy available
[    3.288900] 
[    3.288900] bcm54xx_config_init
[    3.898926] 
[    3.898926] bcm54xx_config_init
[   13.899765] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   13.905856] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   28.670651] In axi fpga driver!
[   28.673718] request_mem_region OK!
[   28.677109] AXI fpga dev virtual address is 0xf01fe000
[   28.682249] *base_vir_addr = 0x8c510
[   28.697624] In fpga mem driver!
[   28.700991] request_mem_region OK!
[   28.704500] fpga mem virtual address is 0xf3000000
[   29.468912] 
[   29.468912] bcm54xx_config_init
[   30.108909] 
[   30.108909] bcm54xx_config_init
[   40.109797] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   40.115815] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  211.267282] random: nonblocking pool is initialized
Detect 1GB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=650 Chain[5] voltage_pic=108 value=880
Fix freq=650 Chain[6] voltage_pic=108 value=880
Fix freq=650 Chain[7] voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=650M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=650M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=650M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650 
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
Chain:5 max freq=650
Chain:5 min freq=650

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650 
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
Chain:6 max freq=650
Chain:6 min freq=650

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:650 
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650 
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650 
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650 
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650 
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650 
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650 
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650 
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650 
Chain:7 max freq=650
Chain:7 min freq=650

max freq = 650
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:23 remote:25 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=3f
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:23 remote:25 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:21 remote:24 offset:26 
Chain[J7] chip[244] get middle temp offset=26 typeID=55
Chain[J7] chip[136] use PIC middle temp offset=28 typeID=3f
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:21 remote:23 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:22 remote:25 offset:26 
Chain[J8] chip[244] get middle temp offset=26 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=3f
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:22 remote:24 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=880 [108]
Chain[J8] set working voltage=880 [108]
setStartTimePoint total_tv_start_sys=77 total_tv_end_sys=78
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=76.8390 Asic[02]=70.6820 Asic[03]=75.4800 Asic[04]=72.6620 Asic[05]=67.9140 Asic[06]=70.4970 Asic[07]=69.5410 Asic[08]=73.5340 
Asic[09]=76.7220 Asic[10]=73.9200 Asic[11]=71.2190 Asic[12]=71.3030 Asic[13]=74.8930 Asic[14]=72.2090 Asic[15]=70.5480 Asic[16]=76.3860 
Asic[17]=73.3490 Asic[18]=72.4940 Asic[19]=78.0640 Asic[20]=67.7290 Asic[21]=79.6910 Asic[22]=76.7890 Asic[23]=80.2620 Asic[24]=72.9130 
Asic[25]=76.7550 Asic[26]=80.6310 Asic[27]=76.1010 Asic[28]=76.0510 Asic[29]=77.8960 Asic[30]=78.6510 Asic[31]=79.0710 Asic[32]=79.6910 
Asic[33]=74.2720 Asic[34]=73.4330 Asic[35]=74.7080 Asic[36]=70.2120 Asic[37]=72.3260 Asic[38]=71.6890 Asic[39]=67.8300 Asic[40]=76.0170 
Asic[41]=74.6080 Asic[42]=74.2720 Asic[43]=78.5670 Asic[44]=73.8700 Asic[45]=76.1680 Asic[46]=68.9370 Asic[47]=72.0410 Asic[48]=70.0440 
Asic[49]=73.4670 Asic[50]=76.5870 Asic[51]=69.4400 Asic[52]=73.9370 Asic[53]=70.5480 Asic[54]=75.0440 Asic[55]=73.0470 Asic[56]=70.2120 
Asic[57]=74.6920 Asic[58]=79.5910 Asic[59]=79.7580 Asic[60]=76.7720 Asic[61]=73.1480 Asic[62]=74.0370 Asic[63]=73.9370 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=67.6120 Asic[02]=70.4130 Asic[03]=76.6710 Asic[04]=75.2790 Asic[05]=71.4370 Asic[06]=75.3290 Asic[07]=72.7620 Asic[08]=75.8330 
Asic[09]=74.2890 Asic[10]=75.2790 Asic[11]=5.20000 Asic[12]=78.6850 Asic[13]=62.9140 Asic[14]=73.0810 Asic[15]=76.3690 Asic[16]=66.9910 
Asic[17]=75.1780 Asic[18]=70.9500 Asic[19]=73.5000 Asic[20]=74.7080 Asic[21]=71.5380 Asic[22]=78.2480 Asic[23]=68.3330 Asic[24]=76.9730 
Asic[25]=74.3730 Asic[26]=67.1750 Asic[27]=71.3190 Asic[28]=74.7420 Asic[29]=74.5070 Asic[30]=69.0880 Asic[31]=70.0440 Asic[32]=68.7530 
Asic[33]=72.5440 Asic[34]=68.1320 Asic[35]=77.1580 Asic[36]=68.8360 Asic[37]=74.5570 Asic[38]=73.5840 Asic[39]=76.2020 Asic[40]=72.2420 
Asic[41]=75.6310 Asic[42]=75.5980 Asic[43]=66.6890 Asic[44]=75.5810 Asic[45]=75.1780 Asic[46]=71.1180 Asic[47]=77.3420 Asic[48]=70.6480 
Asic[49]=74.6920 Asic[50]=72.3430 Asic[51]=68.8530 Asic[52]=71.2190 Asic[53]=75.0100 Asic[54]=71.6050 Asic[55]=71.9400 Asic[56]=72.6110 
Asic[57]=72.9800 Asic[58]=74.7420 Asic[59]=72.3760 Asic[60]=3.80800 Asic[61]=81.3520 Asic[62]=74.7080 Asic[63]=77.9300 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=75.2450 Asic[02]=75.2960 Asic[03]=71.6550 Asic[04]=74.2390 Asic[05]=68.6850 Asic[06]=71.5540 Asic[07]=77.5770 Asic[08]=69.1720 
Asic[09]=76.1850 Asic[10]=78.3160 Asic[11]=74.7920 Asic[12]=69.0210 Asic[13]=35.7350 Asic[14]=71.2190 Asic[15]=79.5910 Asic[16]=76.2690 
Asic[17]=70.0280 Asic[18]=76.9730 Asic[19]=72.0410 Asic[20]=74.6750 Asic[21]=78.4500 Asic[22]=75.0940 Asic[23]=78.7850 Asic[24]=74.0540 
Asic[25]=79.7080 Asic[26]=72.1580 Asic[27]=37.4290 Asic[28]=71.9910 Asic[29]=74.5910 Asic[30]=77.4100 Asic[31]=69.7590 Asic[32]=76.0840 
Asic[33]=68.7530 Asic[34]=71.1680 Asic[35]=73.3160 Asic[36]=73.1980 Asic[37]=76.6380 Asic[38]=69.5750 Asic[39]=71.4540 Asic[40]=77.5100 
Asic[41]=78.0300 Asic[42]=71.7390 Asic[43]=76.4030 Asic[44]=75.6310 Asic[45]=76.8390 Asic[46]=70.6150 Asic[47]=73.6680 Asic[48]=67.3100 
Asic[49]=73.5680 Asic[50]=71.5540 Asic[51]=81.3520 Asic[52]=74.5570 Asic[53]=70.2790 Asic[54]=77.3260 Asic[55]=77.0070 Asic[56]=74.3900 
Asic[57]=76.7720 Asic[58]=70.3630 Asic[59]=77.5940 Asic[60]=75.7820 Asic[61]=69.7420 Asic[62]=72.3260 Asic[63]=72.1750 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=27
Chain[5] Chip[62] local Temp=71
Chain[5] Chip[62] middle Temp=79
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=68
Chain[6] Chip[62] middle Temp=77
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=27
Chain[7] Chip[62] local Temp=73
Chain[7] Chip[62] middle Temp=82
Done read temp on Chain[7]
set FAN speed according to: temp_highest=82 temp_top1[PWM_T]=82 temp_top1[TEMP_POS_LOCAL]=73 temp_change=0 fix_fan_steps=-20
FAN PWM: 44
read_temp_func Done!
CRC error counter=9