Title: 12 GPU Mining Rig build | Need your Advice! Post by: VulvaSniffer on December 26, 2017, 07:53:01 AM Hi Guys, i need your input on my Rig. my rig will consist of the following:
SMOS CPU PENTIUM G4400 Motherboard ASROCK H110 Pro BTC+ RAM GSKILL 8gb DDR4 PSU 2x 2000w 95+ gold (i tried buying 2x 1650w but there are no stocks in my area!) Dual PSU link Ver. 7 Sata powered Risers 128Gb M.2 SSD 12x Gigabyte GTX1070 all single 8-pin 10x Fans in the Rack I also bought WattMeter/Killwatt Is my 2 PSU enough to power those 12 GPU? i guess i need to pay attention into daisy chaining them. i intend to power 2 risers per VGA cable, is that okay? Thanks in advance and looking forward. Title: Re: 12 GPU Mining Rig build | Need your Advice! Post by: zukko on December 26, 2017, 08:16:26 AM On such a number of power cards should be enough, even with a small margin.
The main thing is to use quality cables. Title: Re: 12 GPU Mining Rig build | Need your Advice! Post by: 0xcosmos on December 26, 2017, 10:17:04 AM very good rig list
btw you do not need 8gb 4gb will do anyway use one molex cable for two gpu and your rig will be fine Title: Re: 12 GPU Mining Rig build | Need your Advice! Post by: VulvaSniffer on December 26, 2017, 10:21:09 AM very good rig list btw you do not need 8gb 4gb will do anyway use one molex cable for two gpu and your rig will be fine Thanks man. well i already ordered the 8gb RAM since the one's that i was watching in youtube always uses 8gb ram. What you mean use 1 molex cable for 2 gpu? isn't it better to use 1 pcie cable per gpu to better spread load and also not to overheat cables? can you please explain on this? Title: Re: 12 GPU Mining Rig build | Need your Advice! Post by: buzzkillb on December 26, 2017, 10:29:18 AM very good rig list btw you do not need 8gb 4gb will do anyway use one molex cable for two gpu and your rig will be fine Thanks man. well i already ordered the 8gb RAM since the one's that i was watching in youtube always uses 8gb ram. What you mean use 1 molex cable for 2 gpu? isn't it better to use 1 pcie cable per gpu to better spread load and also not to overheat cables? can you please explain on this? They probably mean 2 molex on 1 strand for 2 risers. Title: Re: 12 GPU Mining Rig build | Need your Advice! Post by: philipma1957 on December 26, 2017, 10:51:32 AM very good rig list btw you do not need 8gb 4gb will do anyway use one molex cable for two gpu and your rig will be fine Thanks man. well i already ordered the 8gb RAM since the one's that i was watching in youtube always uses 8gb ram. What you mean use 1 molex cable for 2 gpu? isn't it better to use 1 pcie cable per gpu to better spread load and also not to overheat cables? can you please explain on this? if you have enough pcie cables use the pcie cables to power the risers. 12x 1070's is 12 x 100 watts = 1200 watts at a low tdp clock in smos set watts to 100 12 x 120 watts =1440 watts at a medium tdp clock in smos set watts to 120 12 x 150 watts = 1800 watts at a high tdp clock in smos set watts to 150 you need 12 + 6 = 18 pcie cables to make it work I suggest using 100 watt setting at first and ending up in the 115 to 125 setting at max once you go above the 125 watt setting 1070's tend to waste the power Title: Re: 12 GPU Mining Rig build | Need your Advice! Post by: VulvaSniffer on December 26, 2017, 01:14:39 PM very good rig list btw you do not need 8gb 4gb will do anyway use one molex cable for two gpu and your rig will be fine Thanks man. well i already ordered the 8gb RAM since the one's that i was watching in youtube always uses 8gb ram. What you mean use 1 molex cable for 2 gpu? isn't it better to use 1 pcie cable per gpu to better spread load and also not to overheat cables? can you please explain on this? They probably mean 2 molex on 1 strand for 2 risers. i see. all my risers are sata powered and yes, i've been planing to use 2 on 1 strand. Thanks for clearing that up! Title: Re: 12 GPU Mining Rig build | Need your Advice! Post by: VulvaSniffer on December 26, 2017, 01:20:56 PM very good rig list btw you do not need 8gb 4gb will do anyway use one molex cable for two gpu and your rig will be fine Thanks man. well i already ordered the 8gb RAM since the one's that i was watching in youtube always uses 8gb ram. What you mean use 1 molex cable for 2 gpu? isn't it better to use 1 pcie cable per gpu to better spread load and also not to overheat cables? can you please explain on this? if you have enough pcie cables use the pcie cables to power the risers. 12x 1070's is 12 x 100 watts = 1200 watts at a low tdp clock in smos set watts to 100 12 x 120 watts =1440 watts at a medium tdp clock in smos set watts to 120 12 x 150 watts = 1800 watts at a high tdp clock in smos set watts to 150 you need 12 + 6 = 18 pcie cables to make it work I suggest using 100 watt setting at first and ending up in the 115 to 125 setting at max once you go above the 125 watt setting 1070's tend to waste the power This is great! thanks for the input, i'll definitely try it out. Anyway, i'm thinking if i should use SMOS or use just stay with NiceHash. Since the 8 limit GPU on windows has already been increased by the creators update then i might as well try that and do the OC and Undervolting using the Nvidia Inspector if MSI afterburn or others will not support 12GPU OC |