|
Title: L3+ Fan Problems Post by: Reudiga on December 27, 2017, 01:48:28 PM Hi,
my L3+ was delivered but i had problems. Its started normal, short time than showing Dec 27 13:46:14 (none) local0.err cgminer[374]: Fan Err! Disable PIC! Fan2 speed is too low 0 pwm 100 Dec 27 13:46:15 (none) local0.err cgminer[374]: Net Err! lastest job more than 2 mins! waiting ... Dec 27 13:46:16 (none) local0.err cgminer[374]: Net Err! lastest job more than 2 mins! waiting ... Dec 27 13:46:17 (none) local0.err cgminer[374]: Net Err! lastest job more than 2 mins! waiting ... But why?! The Fan2 is connected and working when starting... after this error stops to 0. I already tried to update Firmware, but was newest // I switched the Connections from Fan1 and Fan2 and the Miner shows also 0 on Fan2 Title: Re: L3+ Fan Problems Post by: dagarair on December 27, 2017, 02:39:19 PM prob bad board. contact their tech on web and submit a ticket.
Title: Re: L3+ Fan Problems Post by: Reudiga on December 27, 2017, 03:04:47 PM prob bad board. contact their tech on web and submit a ticket. Yeah, that was what i think... Think the Firmware or Controller Board make some problems... :( But crazy is, directly after start all two fans spinning fast... so think its firmware Title: Re: L3+ Fan Problems Post by: aLongMusk on March 16, 2018, 09:38:32 AM Hi,
Did you figure it out? Was it a bad board? I don't have the miner with me so I can't do much hardware inspection. Which firmware version do you run? Thanks Title: Re: L3+ Fan Problems Post by: Merlig on March 16, 2018, 11:42:52 AM look after the airgrid is the distance to the fan ok
|