Title: Can you please help me in this? Post by: rizabbasi on December 27, 2017, 02:14:09 PM Hi,
Thats what happening: Claymore run for couple of hours and then the GPUs gets off and when I click mouse the GPUs gets alive but Windows stuck. My env: HX1200i / H81 / 2x RX 580 Factory OCed, Not under-volted, Not modded/ Virtual Memory: 16GB GPUs status: t=~62C / fan=~58% Hash rate: >26 for each GPU Afterburner settings: Core Voltage (mV): stock, 0 Power Limit: stock, +0 Temp. Limit: 85C Core Clock: 1300MHz Memory Clock: 2100MHz Fan Speed: 45% Claymore .bat: timeout /t 15 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 ethdcrminer64.exe -epool eth-asia1.nanopool.org:9999 -ewal 0xa0467c88d8a6955b1653aeed9973f757bbb0585a/RIG01 -epsw x -mode 1 -allpools 1 -r 1 -tstop 85 -gser 2 -eres 0 Can you please help what does the log depicts: Latest log excerpts: 18:50:05:648 67c Socket was closed remotely (by pool) 18:50:34:725 728 em hbt: 29047, fm hbt: 0, 18:51:36:427 67c ETH: Connection lost, retry in 20 sec... 18:51:36:247 728 watchdog - thread 0 (gpu0), hb time 90813 18:51:39:052 728 WATCHDOG: GPU 0 hangs in OpenCL call, exit 18:51:39:052 728 watchdog - thread 1 (gpu0), hb time 93469 18:51:39:052 728 WATCHDOG: GPU 0 hangs in OpenCL call, exit 18:51:39:068 728 watchdog - thread 2 (gpu1), hb time 93672 18:51:39:068 728 WATCHDOG: GPU 1 hangs in OpenCL call, exit 18:51:39:068 728 watchdog - thread 3 (gpu1), hb time 93484 18:51:39:068 728 WATCHDOG: GPU 1 hangs in OpenCL call, exit 18:51:39:068 728 Rebooting Prior to latest excerpts: 17:01:43:415 1450 Platform: Windows 17:01:43:446 1450 start building OpenCL program for GPU 0... 17:02:15:885 d98 17:02:48:699 d98 17:03:21:512 d98 17:03:54:326 d98 17:04:27:140 d98 17:04:59:954 d98 17:05:32:768 d98 17:06:05:582 d98 17:06:38:384 d98 17:07:10:791 d98 17:07:10:791 d98 Miner cannot initialize for 5 minutes, need to restart miner! 17:07:10:791 d98 Rebooting 17:07:10:853 d98 ADL: Cannot find any AMD adapters Thanking you in anticipation and looking forward. Regards, Rizwan Title: Re: Can you please help me in this? Post by: rizabbasi on December 28, 2017, 06:25:49 AM Set Win10 Sleep mode to disabled and its running smoothly for the last 11.5 hours. So it was just a petty thing that was giving big headache!
|