|
Title: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 04, 2013, 03:21:23 AM This case is now available at GAW Miners.com (http://www.gawminers.com/scrypt-cases/).
http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2-640_zps996c7cdc.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2-640_zps996c7cdc.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wendcaps-640_zps9b1396be.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wendcaps-640_zps9b1396be.jpg.html) Version 1: This is an all aluminum, heavy-duty, open-air case for BitFury's ASICs (their 'm' and 'h' boards). (Design/discussion thread here (https://bitcointalk.org/index.php?topic=257788.0)). http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1Front-640_zpsecf4b872.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1Front-640_zpsecf4b872.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1Back-640_zpsa50e1cea.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1Back-640_zpsa50e1cea.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1FrontSpacerCU-640_zps4f102e4b.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1FrontSpacerCU-640_zps4f102e4b.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1FrontwHW-640_zpsfbb84117.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1FrontwHW-640_zpsfbb84117.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1BackwHW-640_zps24d09bb3.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1BackwHW-640_zps24d09bb3.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/BitfuryASICtrayVd_zpseae717ed.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/BitfuryASICtrayVd_zpseae717ed.jpg.html) This isn't up on my website just yet, but in the meantime, send me an email (rchomiczewski @ gmail) to purchase. Can't decide whether to get the pre-assembled case? Then check-out the assembly instructions (http://richchomiczewski.wordpress.com/bitfury-open-air-case-assembly-instructions/). Now shipping with a few extra fasteners to mount whatever, like this PSU switch: http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/PSUBoard-640_zps7298e18e.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/PSUBoard-640_zps7298e18e.jpg.html) Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: carlotech on August 04, 2013, 03:50:14 AM i just love those gt fans...nice work..
Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Spotswood on August 04, 2013, 04:21:27 AM i just love those gt fans...nice work.. Thanks.I forgot to mention that the two beams supporting the m-board can be re-positioned so that you can mount three thick 32/38mm thick fans. ;D Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Swimmer63 on August 04, 2013, 04:29:36 AM Rich -
I see your thickness measurements. But I am not very knowledgeable about fans. What size (height, width or fan diameter) do we need to get for three across on each side? Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Spotswood on August 04, 2013, 04:39:15 AM Rich - I see your thickness measurements. But I am not very knowledgeable about fans. What size (height, width or fan diameter) do we need to get for three across on each side? "Normal/standard" 120mm x 25mm. Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Fiyasko on August 04, 2013, 06:31:40 AM F**king gorgeous work, do you have just that standard shipping rate or would it cost you or I more if you were to ship it to a place Far away from you
In reality, would shipping it to Canada cost any more? I dont know where you are shipping from for the sake of testing, would it cost you more to send it to some place thats a contenent away? (IE Mexico to Russia) Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Cablez on August 04, 2013, 12:32:46 PM Maybe I missed it but do we know the final placement of the Rpi in the final board setup? I know on the prototype it was hanging off 90deg to the M-board. How is it now and have you adjusted for it in your design? Thanks.
Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Spotswood on August 04, 2013, 01:20:51 PM F**king gorgeous work, do you have just that standard shipping rate or would it cost you or I more if you were to ship it to a place Far away from you In reality, would shipping it to Canada cost any more? I dont know where you are shipping from for the sake of testing, would it cost you more to send it to some place thats a contenent away? (IE Mexico to Russia) In addition to the cost of the case, I collect whatever the actual shipping charge is (USPS/UPS) to your location. Maybe I missed it but do we know the final placement of the Rpi in the final board setup? I know on the prototype it was hanging off 90deg to the M-board. How is it now and have you adjusted for it in your design? Thanks. I don't know what the final placement is, so to cover all bases... connecting the Pi directly to the board in any orientation should work. http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/BitfuryASICtrayV2_zps9e9ca6ab.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/BitfuryASICtrayV2_zps9e9ca6ab.jpg.html) Otherwise, I include a mounting plate which you can attach the Pi to and then connect the Pi it to the board with a cable (not included). Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Cablez on August 04, 2013, 01:40:18 PM Let me ask c-scape how it looks now that the prototype is done.
Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: darkfriend77 on August 04, 2013, 07:55:24 PM it would be possible to have it stand on the PSU side ....
like this ... https://i.imgur.com/VRVbUJp.png with the black knobs on the small psu side ??? if so i would be intrested how ... about the delivery in EU? ... Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Spotswood on August 04, 2013, 07:59:39 PM it would be possible to have it stand on the PSU side .... ...snip... if so i would be intrested how ... about the delivery in EU? ... Yes, the case can be easily re-configured in a vertical orientation. Shipping to EU seems to be ranging $55-75 USD. Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: lubah on August 06, 2013, 07:41:42 PM assuming the $125 is for the 'case' only... are you selling an option that includes fans and power supply?
Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Spotswood on August 08, 2013, 02:13:44 AM assuming the $125 is for the 'case' only... are you selling an option that includes fans and power supply? No fans. Just the case. Sorry. Title: Re: [FS] All aluminum open air case for BitFury ASICs Post by: Spotswood on August 10, 2013, 04:08:57 AM Note that these will support both the current and forthcoming versions of the m-board. More info on this soon.
Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Swimmer63 on August 10, 2013, 04:41:30 AM Shipping soon?
Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 10, 2013, 10:31:23 AM Shipping soon? Two - three weeks. Although, I will know more after I plow through the first batch next week. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 10, 2013, 09:56:20 PM Although I don't have an m-board here, I've verified as well as I can that the Raspberry Pi will fit either plugged directly into the socket or mounted underneath the board.
http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1PiCU-640_zps8f51d570.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV1PiCU-640_zps8f51d570.jpg.html) Title: Re: [FS] All aluminum open air case for BitFury miners Post by: creativex on August 12, 2013, 12:21:56 AM Very nice work!
Paypal only? You won't accept payment in BTC? Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 12, 2013, 04:13:11 AM Very nice work! Paypal only? You won't accept payment in BTC? PayPal only. Sorry. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 12, 2013, 04:20:23 AM The case is pre-drilled for all of the mounting holes on the current and forthcoming versions of the m-board. The different widths of the boards is handled by the ability to re-position the two support beams.
http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryStandoffsandbeamadjustment-640_zps52713120.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryStandoffsandbeamadjustment-640_zps52713120.jpg.html) Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 14, 2013, 04:14:06 AM If you are undecided on whether to get the pre-assembled case, here are the assembly instructions (http://richchomiczewski.wordpress.com/bitfury-open-air-case-assembly-instructions/).
Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 15, 2013, 10:24:28 PM Now shipping with a few extra fasteners to mount whatever, like this PSU switch:
http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/PSUBoard-640_zps7298e18e.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/PSUBoard-640_zps7298e18e.jpg.html) Title: Re: [FS] All aluminum open air case for BitFury miners Post by: eestimees on August 16, 2013, 08:33:22 AM Now shipping with a few extra fasteners to mount whatever, like this PSU switch: http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/PSUBoard-640_zps7298e18e.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/PSUBoard-640_zps7298e18e.jpg.html) wow, where i can get this switch added to my order? Title: Re: [FS] All aluminum open air case for BitFury miners Post by: allinvain on August 16, 2013, 01:24:35 PM Right here:
http://www.robotshop.com/productinfo.aspx?pc=RB-Cyt-101&lang=en-US Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Cablez on August 16, 2013, 01:42:02 PM Mine is still cheaper with shipping. :P
Anyways, has c-scape shown what the Rpi layout looks like after modifying the M-board header yet? Title: Re: [FS] All aluminum open air case for BitFury miners Post by: -Redacted- on August 17, 2013, 01:34:07 AM Just received my case this evening - looks great. I'm mounting power supply at the moment, will try to put up some pictures tomorrow.
If anyone is looking for fans, Amazon has a Cooler Master silent 4-pack of fans here for about $3 each: http://www.amazon.com/Cooler-Master-120mm-Silent-Value/dp/B000O8I474/ Title: Re: [FS] All aluminum open air case for BitFury miners Post by: E on August 17, 2013, 04:28:30 AM If anyone is looking for fans, Amazon has a Cooler Master silent 4-pack of fans here for about $3 each: http://www.amazon.com/Cooler-Master-120mm-Silent-Value/dp/B000O8I474/ Kudos for putting up an amazon link without a referral code in it :) Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Isokivi on August 17, 2013, 04:51:22 AM Shipping from ?
...this should be default info whenever you sell physical goods, as for example to me it can make a 24% difference in the actual price I end up paying before I have the product in hand. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 17, 2013, 05:39:27 AM Title: Re: [FS] All aluminum open air case for BitFury miners Post by: allinvain on August 17, 2013, 06:11:48 AM Btw, what shipping company are you using? I hope to god it's not UPS as they rape us with customs brokerage fees over here in Canada. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 17, 2013, 06:24:54 AM Btw, what shipping company are you using? I hope to god it's not UPS as they rape us with customs brokerage fees over here in Canada. I always use the USPS when shipping internationally. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: tom99 on August 17, 2013, 12:11:05 PM Btw, what shipping company are you using? I hope to god it's not UPS as they rape us with customs brokerage fees over here in Canada. +1 Title: Re: [FS] All aluminum open air case for BitFury miners Post by: allinvain on August 19, 2013, 06:19:51 AM How is the case production going? How far are you into your order queue?
Title: Re: [FS] All aluminum open air case for BitFury miners Post by: eestimees on August 19, 2013, 07:17:14 AM Right here: http://www.robotshop.com/productinfo.aspx?pc=RB-Cyt-101&lang=en-US Found it for EU also: http://www.robotshop.com/eu/productinfo.aspx?pc=RB-Cyt-101&lang=en-US (http://www.robotshop.com/eu/productinfo.aspx?pc=RB-Cyt-101&lang=en-US) Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 19, 2013, 12:40:53 PM How is the case production going? How far are you into your order queue? The queue is getting shorter. ;D Working as hard as I can to get them shipped asap... Title: Re: [FS] All aluminum open air case for BitFury miners Post by: allinvain on August 24, 2013, 10:27:42 PM I see that v2 of the m-board is different than the previous one in regards to mounting the raspberry pi. Do you think it will be necessary to move the PSU to the opposite side and if so how easy it for us to do this on our own. I presume the case comes assembled with the PSU mount point on the left, no?
Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 24, 2013, 11:15:24 PM I see that v2 of the m-board is different than the previous one in regards to mounting the raspberry pi. Do you think it will be necessary to move the PSU to the opposite side and if so how easy it for us to do this on our own. I presume the case comes assembled with the PSU mount point on the left, no? Yes, I've switched the placement of the PSU to the opposite side. http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/BitfuryASICtrayV7_zps3c97e7e3.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/BitfuryASICtrayV7_zps3c97e7e3.jpg.html) For all of the cases shipped so far, all you have to do (basically) is move the PSU post, PSU hold-down beam and the two nuts that are used to fasten the beam to the posts, all of which should take less than 5 minutes. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: tacotime on August 25, 2013, 02:34:26 PM I'll take a preassembled case shipping to Canada, I'm not sure how to enter the queue but PM me and I can send you the quantity in BTC for it.
Title: Re: [FS] All aluminum open air case for BitFury miners Post by: -Redacted- on August 25, 2013, 03:25:09 PM Actually I think that is going to make things more difficult - the cables come out the back of the PSU. With the PSU on the other side, the RPi will end up being in the path of the cables. I guess we'll see soon enough...
I see that v2 of the m-board is different than the previous one in regards to mounting the raspberry pi. Do you think it will be necessary to move the PSU to the opposite side and if so how easy it for us to do this on our own. I presume the case comes assembled with the PSU mount point on the left, no? Yes, I've switched the placement of the PSU to the opposite side. http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/BitfuryASICtrayV7_zps3c97e7e3.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/BitfuryASICtrayV7_zps3c97e7e3.jpg.html) For all of the cases shipped so far, all you have to do (basically) is move the PSU post, PSU hold-down beam and the two nuts that are used to fasten the beam to the posts, all of which should take less than 5 minutes. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: xjack on August 26, 2013, 12:21:05 PM What's the footprint of this case? Trying to figure out what fits where in a smallish wiring closet.
Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on August 26, 2013, 12:36:49 PM What's the footprint of this case? Trying to figure out what fits where in a smallish wiring closet. H x W x D: 8.5 x 21.125 x 9.5 inches Title: Re: [FS] All aluminum open air case for BitFury miners Post by: QueenB on August 26, 2013, 12:57:25 PM http://richchomiczewski.wordpress.com/
[/quote] love the cases....alas, i dont need one.....or do i Title: Re: [FS] All aluminum open air case for BitFury miners Post by: darkfriend77 on September 03, 2013, 11:04:59 PM using m-board v2 ... spacing btw. rasp is a bit ... i don't know .... how to fix it need really big spacer? ... :-) https://i.imgur.com/5JHpUV2.jpg https://i.imgur.com/s4xkUOk.jpg https://i.imgur.com/nK7TNMO.jpg did i missed something ? ^^ :-) also the middle bar seemed to be on the other side compared to the pictured instructions, but that isn't important i suppose .. :-) http://richchomiczewski.wordpress.com/bitfury-open-air-case-assembly-instructions/ Title: Re: [FS] All aluminum open air case for BitFury miners Post by: cet on September 03, 2013, 11:08:51 PM That looks really good. How well does the case hold the h-boards steady?
/cet Title: Re: [FS] All aluminum open air case for BitFury miners Post by: -Redacted- on September 03, 2013, 11:11:54 PM I'd move the two beams supporting the m-board in the opposite direction of the RaspPi, and re-adjust the top hold down. It looks to me like they are they are too close to the "front" edge, and if you want to move them back there's probably a good 6 inches or so to spare in that direction.
Also, there should be sufficient room to route the PSU cables under the m-board - they shouldn't need to snake around the RPi like that. Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on September 03, 2013, 11:35:20 PM :o Nice.
The mounting plate for the rPi was really only intended for v1 m-boards and the use of the ribbon cable. I'm open to suggestions for how to properly mount the rPi to the case for v2 boards. ;D The posted assembly instructions is for v1 m-boards and needs to be updated for v2. :'( Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on September 03, 2013, 11:43:47 PM That looks really good. How well does the case hold the h-boards steady? /cet Yeah, I'm hoping I got the height just right (not too tight or too loose). Title: Re: [FS] All aluminum open air case for BitFury miners Post by: darkfriend77 on September 04, 2013, 07:25:36 AM :o Nice. The mounting plate for the rPi was really only intended for v1 m-boards and the use of the ribbon cable. I'm open to suggestions for how to properly mount the rPi to the case for v2 boards. ;D The posted assembly instructions is for v1 m-boards and needs to be updated for v2. :'( ... of that sounds fine ... i will remove that plate ... its unnecessary in my opinion as the raspberry seems to hold good on the m-board ... i will start mounting the fans ... today ... and show again some pictures ... :-) i have a fan controller so i can turn them off as for now it seems the miner is performing best without to much cooling ... Title: Re: [FS] All aluminum open air case for BitFury miners Post by: darkfriend77 on September 04, 2013, 10:30:57 PM ... finished it ... and running ... at night ...
even if the fans are better turned off for hashing ... gg .. it looks great ... https://i.imgur.com/j3WtFJw.jpg https://i.imgur.com/dbHoz6T.jpg https://i.imgur.com/SUJXnjX.jpg Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on September 06, 2013, 10:54:04 PM Version 2 price is $100USD (flat packed) $140 (assembled), plus shipping from New Hampshire, US. To order, send an email to rchomiczewski at gmail.com.
Optional fan tabs (with all required fasteners), sets of are: x4 - $5 (for 2 fans); x6 - $8 (for 3 fans). Optional end caps are $.55 each. A mounting plate for the RaspberryPi is +$10 (for when the rPi and m-board are connected via a ribbon cable). Version 2 details:
Pictures (fans not included; fan mounting "tabs", end caps and rPi mounting plate are options): http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2-640_zps996c7cdc.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2-640_zps996c7cdc.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2Stacked-640_zps61d7b3a1.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2Stacked-640_zps61d7b3a1.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2StackedConnectors-640_zpsaadb999f.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2StackedConnectors-640_zpsaadb999f.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wendcaps-640_zps9b1396be.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wendcaps-640_zps9b1396be.jpg.html) Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: User705 on September 07, 2013, 01:18:32 AM Will these work for asicminer blades or no?
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on September 07, 2013, 02:05:19 AM Will these work for asicminer blades or no? No, but the same material could be used to house those. Is there a mechanical drawing of one of those blades? Title: Re: [FS] All aluminum open air case for BitFury miners Post by: astutiumRob on September 07, 2013, 04:23:43 AM The BFs don't seem to run better without a whole lot of cooling, so I've simplified the design a bit. If you're doing a v3 make it shorter than 475mm so it can fit in a rack between the posts -mounting the psu in the middle instead of 1 of the fans shoudl do it :)Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: forum2005 on September 14, 2013, 09:16:02 AM -1
Someone who does not respond to emails to potential buyers is someone who does not want to sell. Mail sent 7 days ago and still hope to answer the total cost for ordering. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: rammy2k2 on September 14, 2013, 10:30:41 AM -1 Someone who does not respond to emails to potential buyers is someone who does not want to sell. Mail sent 7 days ago and still hope to answer the total cost for ordering. oh, and i wanted to buy one pretty soon too ... Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on September 14, 2013, 12:39:57 PM -1 Someone who does not respond to emails to potential buyers is someone who does not want to sell. Mail sent 7 days ago and still hope to answer the total cost for ordering. oh, and i wanted to buy one pretty soon too ... I somehow missed his/her email, I sent a PM to fix this. ??? :o Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on September 14, 2013, 04:44:23 PM Pictures of the two most common locations for mounting fans:
http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg.html) Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: dresdenreader on September 17, 2013, 03:45:48 PM Email sent Spots.
Also sent you a PM to let you know about the email in case you miss it = ) Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: forum2005 on September 20, 2013, 06:29:30 PM Pictures of the two most common locations for mounting fans: http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg.html) Order and payment do it. ;D What is the recommended fan diameter? Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: dresdenreader on September 20, 2013, 09:24:10 PM Pictures of the two most common locations for mounting fans: http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wfans-640_zps46157425.jpg.html) Order and payment do it. ;D What is the recommended fan diameter? 120mm In fact, there is a special price right now for a 4 pack of cooler master fans on amazon right now. http://www.amazon.com/gp/product/B000O8I474/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Slander on September 21, 2013, 10:54:51 PM Newegg had those for $9.99 about 3 weeks ago. I got 12 of them and they are great, virtually silent.
120mm In fact, there is a special price right now for a 4 pack of cooler master fans on amazon right now. http://www.amazon.com/gp/product/B000O8I474/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1 [/quote] Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Littleshop on September 24, 2013, 05:16:59 AM Thanks Spotswood! Very happy with my case. I have not figured out how to get the power supply mounted but all else is great. I had some minor issues with the location of some of the nuts in the slots being on the wrong sides but I took it apart and got it right. Tightened up the case feels and looks great. It is much better having my hardware locked in the sturdy frame vs having it on a cardboard box. :)
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: frankenmint on September 30, 2013, 08:45:44 PM Thank you I just got my frame today...I'm a little confused on the bag with the two nylon spacers. Its unmarked. What is it for? I think its for mounting the H-board spacers. I'll show completed pics once my hash-power comes around...My only other wish is that your kit came with an exploded diagram of how it all goes together and also if I could get a parts list. Thank you for the small wera wrenches - that was a really nice touch!
Is it easier to get everything mounted in first AND THEN to mount in my M-board and H-board hardware or the other way around? get those installled first then mount my fans and PSU? Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on September 30, 2013, 09:45:59 PM Thank you I just got my frame today...I'm a little confused on the bag with the two nylon spacers. Its unmarked. What is it for? I think its for mounting the H-board spacers. I'll show completed pics once my hash-power comes around...My only other wish is that your kit came with an exploded diagram of how it all goes together and also if I could get a parts list. Thank you for the small wera wrenches - that was a really nice touch! Is it easier to get everything mounted in first AND THEN to mount in my M-board and H-board hardware or the other way around? get those installled first then mount my fans and PSU? The two little nylon spacers are "extra" parts to mount what-nots, do-dads, etc. ;D There should be a big bag of nylon spacers to separate the h-boards. Assemble the entire case first, along with any fan tabs. Then mount m-board, h-board, fans, pi and PSU. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spathi on September 30, 2013, 10:44:04 PM Looking forward to putting the case to good use when my Bitfury kit arrives.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: frankenmint on September 30, 2013, 11:51:00 PM Looking forward to putting the case to good use when my Bitfury kit arrives. what he said ;D Thanks again Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on October 01, 2013, 04:18:29 AM Plastic end caps are a new option:
http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/Endcapsfor15mmextrusions-640_zpscbf7312a.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/Endcapsfor15mmextrusions-640_zpscbf7312a.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wendcaps-640_zps9b1396be.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wendcaps-640_zps9b1396be.jpg.html) Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spathi on October 01, 2013, 12:12:41 PM Plastic end caps are a new option Nice! Really adds that finishing touch to it. Price? Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on October 01, 2013, 12:20:04 PM Plastic end caps are a new option Nice! Really adds that finishing touch to it. Price? $0.55 each. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: frankenmint on October 02, 2013, 02:52:13 AM Plastic end caps are a new option Nice! Really adds that finishing touch to it. Price? $0.55 each. may i have the stl pls??? or even the gcode would do :) Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: frankenmint on October 02, 2013, 04:01:26 AM could you give a pic of how the power supply connects to the frame? I think i get that the tabs attach to the side frame either on the top or sides and screw into the mesh area on the PSU...is that correct?
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on October 02, 2013, 05:44:20 AM could you give a pic of how the power supply connects to the frame? I think i get that the tabs attach to the side frame either on the top or sides and screw into the mesh area on the PSU...is that correct? I don't have a pic just yet, but here's a model. Underneath the PSU are 3 small rubber bumpers. http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/BitfuryASICTrayVersion2r1_zps29957d6d.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/BitfuryASICTrayVersion2r1_zps29957d6d.jpg.html) Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: darkfriend77 on October 02, 2013, 10:36:45 AM One thing that i remarked is that the stabilisation of the h-cards interupts the air from the fans ... on the chip that is in that corner ... as those boards are predicted to get OC and fans and heatsinks are a must ... it might be an interesting option to get a stabilistation in the bottom corner where no ... smd parts are ...
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on October 02, 2013, 12:55:45 PM One thing that i remarked is that the stabilisation of the h-cards interupts the air from the fans ... on the chip that is in that corner ... as those boards are predicted to get OC and fans and heatsinks are a must ... it might be an interesting option to get a stabilistation in the bottom corner where no ... smd parts are ... Or, now that v2 m-boards are being shipped worldwide, the existing design could be adjusted where everything is mounted closer to the PSU (by 30mm?). Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: darkfriend77 on October 02, 2013, 01:51:07 PM Hmm ... I don't know ... the raspberry is already close ... to my PSU ....
I would like to buy some moreparts to fix some additional fans ... where can I buy those .. ? https://i.imgur.com/IMFunum.jpg Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: frankenmint on October 02, 2013, 06:19:37 PM Yea I figured that out yesterday right before you posted it. I ended up using a 3rd tab to fasten against the side.
https://mail-attachment.googleusercontent.com/attachment/u/0/?ui=2&ik=9db8f79227&view=att&th=1417a612f4a8b416&attid=0.1&disp=inline&realattid=1447808376686772224-1&safe=1&zw&saduie=AG9B_P8MUR-0RTWL5j3u9jWrBATq&sadet=1380737824829&sads=IDsuidj9laru9oEIn_Ft4_kEKeM&sadssc=1 Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: jflowers on October 07, 2013, 07:38:51 PM Hmm ... I don't know ... the raspberry is already close ... to my PSU .... I would like to buy some moreparts to fix some additional fans ... where can I buy those .. ? https://i.imgur.com/IMFunum.jpg Probably the wrong thread (sorry) - but... Could you post were you procured those heatsinks for the H board? Also, anything special with the paste to mount them? Thanks! Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on October 08, 2013, 04:02:43 AM Hmm ... I don't know ... the raspberry is already close ... to my PSU .... I would like to buy some moreparts to fix some additional fans ... where can I buy those .. ? Probably the wrong thread (sorry) - but... Could you post were you procured those heatsinks for the H board? Also, anything special with the paste to mount them? Thanks! Search for "VGA heatsinks", such as http://www.amazon.com/Cosmos-Aluminum-Cooling-Heatsinks-cooler/dp/B007XACV8O/ref=sr_1_1?s=electronics&ie=UTF8&qid=1379368738&sr=1-1&keywords=Cosmos+%C2%AE+20+PCS+mini+Aluminum+Chips or http://www.ebay.com/sch/i.html?_trksid=p2047675.m570.l1313.TR0.TRC0.XVGA+RAM+Cooling+Heatsinks&_nkw=VGA+RAM+Cooling+Heatsinks&_sacat=0&_from=R40 Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Soros Shorts on October 25, 2013, 05:22:48 PM Are these still in production?
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on October 25, 2013, 07:07:10 PM Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: tom99 on October 26, 2013, 08:37:55 PM If V2 works on the US V1 Mboard?
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on October 26, 2013, 08:56:34 PM If V2 works on the US V1 Mboard? Yes. Just let me know when you order. Otherwise, I only drill mounting holes for V2 m-boards. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: tom99 on October 26, 2013, 09:15:40 PM If V2 works on the US V1 Mboard? Yes. Just let me know when you order. Otherwise, I only drill mounting holes for V2 m-boards. PM sent Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: tom99 on November 03, 2013, 04:06:55 PM Hi, Rich
Can you tell me when you are going to ship out my order? Thank you Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on November 03, 2013, 04:19:10 PM Hi, Rich Can you tell me when you are going to ship out my order? Thank you All done. Shipping on Monday. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: tom99 on November 03, 2013, 04:36:28 PM Hi, Rich Can you tell me when you are going to ship out my order? Thank you All done. Shipping on Monday. Thank you Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on November 09, 2013, 02:14:58 AM I've received confirmation from a client that the V3 m-board has the same mounting holes as the V2 m-board.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: allinvain on November 09, 2013, 07:51:09 AM I too can confirm that. I have a v3 mboard installed in one of your cases and it all fits just fine.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: johnnyc on January 02, 2014, 06:28:17 PM Spotswood - Are you still fabricating these? Would be interested in two more of them.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on January 02, 2014, 10:27:48 PM Spotswood - Are you still fabricating these? Would be interested in two more of them. Yes. Ok. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: allinvain on January 03, 2014, 07:05:13 AM Are you almost caught up on your backlog? I'm still waiting for the case I ordered a month or so ago.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: johnnyc on January 11, 2014, 06:16:19 PM Thanks for cases, Rich! They work perfectly and keep the cards stable. Great work!
https://i.imgur.com/dVm49U0.jpg https://i.imgur.com/IUix9bI.jpg https://i.imgur.com/D7nXVFx.jpg Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: davecoin on January 11, 2014, 07:31:18 PM :o That looks amazing! What's the lead time on these cases?
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: ibrahim11 on January 11, 2014, 07:35:27 PM Spotswood - Are you still fabricating these? Would be interested in two more of them. Yes. Ok. why don't you do your tray cases anymore? Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on January 11, 2014, 08:06:38 PM :o That looks amazing! What's the lead time on these cases? Hard to say actually, I build small batches of these intermixed with big batches of my trays for litecoin mining. Spotswood - Are you still fabricating these? Would be interested in two more of them. Yes. Ok. why don't you do your tray cases anymore? I'm building all of my open-air cases (for litecoin/bitfury/asicminer) as fast as I can. Currently, there's a 5 week long waiting list. Send me an email to get on the list. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: xzempt on January 13, 2014, 05:08:17 PM i believe i'll need a couple of these soon! need me to fly in and help you get caught up? :)
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Swimmer63 on January 13, 2014, 06:03:00 PM Rich I sent you an email ordering another BitFury case. Did you receive it?
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: stan258 on February 07, 2014, 04:57:05 PM Hello I would like to order one as well. The site says you are not taking anymore orders.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: btljuice on February 07, 2014, 09:39:17 PM I've sent you messages, but also writing this post so you can count me among those who will buy a case if you make them again.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on February 08, 2014, 04:38:33 PM Lately, I've been focusing on manufacturing just my open-frame trays for scrypt mining. I might build another batch of these in a few weeks.
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: stan258 on February 08, 2014, 06:02:34 PM Lately, I've been focusing on manufacturing just my open-frame trays for scrypt mining. I might build another batch of these in a few weeks. Pretty please build another batch I would be down for 2. Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: daddyfatsax on February 17, 2014, 08:28:11 PM I am in for 2 now! Holding out hope you can make some soon. Thanks Rich!
Title: Re: [FS] **Version 2**: All aluminum open air case for BitFury miners Post by: Spotswood on May 02, 2014, 11:50:44 AM This case is now available at GAW Miners.com (http://www.gawminers.com/scrypt-cases/).
http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2-640_zps996c7cdc.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2-640_zps996c7cdc.jpg.html) http://i715.photobucket.com/albums/ww153/Spotswood_/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg (http://s715.photobucket.com/user/Spotswood_/media/Bitfury%20ASIC%20tray/Final%20Pics/BitFuryV2wbarfans-640_zps375a177b.jpg.html) Title: Re: [FS] All aluminum open air case for BitFury miners Post by: TR00P3R on June 07, 2014, 03:12:47 PM Ignore my post (answer if you want others to see) but I've sent you an email.
Hi Sportswood, Would this case be suitable for use as a standard pc open air case? I want to use this case for a gaming rig with the hope of being able to mount the water cooling like you've mounted the fans. My main goal would to be to attach a bracket that will take a lcd monitor on the base of it and stand it up long ways. Do you think this case would suit this setup? Or is there another case you make or additional brackets you can add to it that might be better? Title: Re: [FS] All aluminum open air case for BitFury miners Post by: Spotswood on June 08, 2014, 02:33:21 PM Ignore my post (answer if you want others to see) but I've sent you an email. Ok.Hi Sportswood, Would this case be suitable for use as a standard pc open air case? I want to use this case for a gaming rig with the hope of being able to mount the water cooling like you've mounted the fans. My main goal would to be to attach a bracket that will take a lcd monitor on the base of it and stand it up long ways. Do you think this case would suit this setup? Or is there another case you make or additional brackets you can add to it that might be better? It would be easier to build a custom case, using the same building materials. For example, here's a SFF: http://i715.photobucket.com/albums/ww153/Spotswood_/My%20Modular%20Case/MymITXCaseD_zpse7e45e75.jpg http://i715.photobucket.com/albums/ww153/Spotswood_/My%20Modular%20Case/MymITXCaseG_zpsf0ff25f3.jpg http://i715.photobucket.com/albums/ww153/Spotswood_/My%20Modular%20Case/MymITXCaseH_zpscb9d7513.jpg |
