|
Title: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: Olly_K on July 07, 2011, 07:04:28 PM I've just tested this, and to confirm that with these drivers, in Windows Vista 64bit you do not need dummy plugs or CF bridges.
GUIMINER see's all 3 cards and there's no connection between them physically, apart from through the motherboard. Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: Serge on July 07, 2011, 07:21:34 PM Does it effect hash rate at all?
Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: Olly_K on July 07, 2011, 07:23:39 PM unsure.........i was seeing ~400mh/s on each of my 5870s clocked to 925mhz in crossfire mode.
seeing about 375mh/s now at 850mhz but I'm having trouble syncing the overclock to all 3 cards, I'll update when I figure it out Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: Olly_K on July 07, 2011, 08:00:10 PM OK, managed to get an overclock of 900Mhz on all 3 cards. For some reason pushing over 900 bluescreens.
Mh/s is 395-400 on each card, so no loss/gain in performance Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: CyberPhunk on July 07, 2011, 08:29:17 PM I've been reading some posts on overclocking forums that the 11.7 drivers aren't too stable yet. Hopefully they get the bugs worked out soon, and make an official release. :)
Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: pbj sammich on July 07, 2011, 08:29:45 PM you do not need dummy plugs or CF bridges. this is great news if it works well Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: huayra.agera on July 08, 2011, 04:25:03 AM Hi! I too have tested these drivers and it seems I had to reduce my overclock a bit to make things stable. And wow! Since you said it, I might try doing the no dummy plugs thing!
EDIT: No dummy plugs work! This is just awesome! :), no effect on hashrate at all, just more flexibility on OC settings! Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: Jack of Diamonds on July 08, 2011, 04:56:50 AM you do not need dummy plugs or CF bridges. this is great news if it works well Just installed this on 1 of my rigs with 4 gpus; Works 100%. No need for dummies or attaching all cards to monitors. Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: 1bitc0inplz on July 08, 2011, 05:39:26 AM Just installed this on 1 of my rigs with 4 gpus; Works 100%. No need for dummies or attaching all cards to monitors. That's fantastic news, too bad I stocked up on resistors :( lol I think I'll wait until it's final, but the moment they GM this I'm all on it! Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: pbj sammich on July 08, 2011, 01:16:22 PM Question whats the CPU usage with these drivers without the dummy plugs attached?
Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: pandemic on July 08, 2011, 01:48:00 PM Question whats the CPU usage with these drivers without the dummy plugs attached? Also, is there any improvement in CPU usage while mining? with the current version of CCC, my CPU (core2duo) is around 40% at 289mh/s. ... I just ordered some resistors last night to make a dummy plug, lawl. Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: sharky112065 on July 09, 2011, 01:00:35 AM Did not work for me. I still have to use dummy plugs. CPU maxes out with just one worker/miner.
Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: kr105 on July 09, 2011, 02:30:03 AM Upside: No dummy plugs :)
Downside: CPU still at 100% and about 50 crashes to get an stable OC :( Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: erek on July 09, 2011, 10:17:36 AM make sure you all disable ULPS when in CrossFire/X mode... and using anything like MSI Afterburner, because ULPS enabled (i think by default) tends to power off one of the cards in CrossFireX which will crash out the whole system when applying settings via apps like MSI Afterburner
Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: Serge on July 09, 2011, 02:35:40 PM make sure you all disable ULPS when in CrossFire/X mode... and using anything like MSI Afterburner, because ULPS enabled (i think by default) tends to power off one of the cards in CrossFireX which will crash out the whole system when applying settings via apps like MSI Afterburner I'm not using C11.7 I'm crossfired and using MSI AB, when not in heavy use both of my GPUs drop to 157/300 if i fire up miners OC settings kick in without a problem. Title: Re: Catalyst 11.7 Preview Drivers - No Dummies or Bridges Post by: huayra.agera on July 09, 2011, 05:59:17 PM Update: Now with 3 GPUs on one machine and still no dummy plugs, crossfire bridges, hashing away! =) I used the preview 11.7 instead of the beta (the beta driver is very buggy).
|