|
Title: Help- New rig powers on, but is not detected on monitor Post by: captainawesome on January 10, 2018, 01:56:58 AM Hi, I am building a new rig and really need some help. I am just trying to test the system and i cant make it show up on the monitor
Motherboard- GIGABYTE 990FXA-UD3 CPU- AMD ATHLON II RAM-NANYA 2GB x 2 PSU- Corsair HX850i OS- ETHos boot from USB tried both GPU- MSI AMD rx 570 GIGABYTE AMD rx 560 keyboard and mouse are USB monitor is a DELL, plugged into DVI all of the fans power on, usb for OS is warm, light is on for ethernet cable I have tried: changing the slots for the RAM and GPU and tried a different USB with the ETHos on it in each 3.0 slot and the slots under the ethernet cable. Please help! and thank you for any help anyone can give Title: Re: Help- New rig powers on, but is not detected on monitor Post by: Sevarchik on January 10, 2018, 06:00:34 AM Ive seen the goods not new,
First try set bios defaults, by unpluging cmos battery for 2 3 min when all system de-energized. If this not help's unplug all memory modules and run only cpu + mb with speaker connected. If mb and cpu ok, system must speaking shor signals because memory not installed. |