Title: Asrock h110 btc+ Post by: 33eyal on January 14, 2018, 09:24:27 AM im having the wierdest problem with my 12 gpu rig...
specifications : 12 x rx580 8gb 4 gb ddr4 ram g4400 cpu 2 x 850w psu 1 x 1000w psu asrock h110 btc+ working on smos with 64gb usb stick my rig is doing 350 mh/s stable for 5-6 hours but then 1 of the cards (only from 06 to 11) gets disconnected and turns to 00.0 or sometimes it might turn all og the gpu's from 06 to 11 to 00.0 i tried changing the cards, risers and the cables. the only guess i have is its the mother board. does anyone here ever had this problem with this mothert board? or any similar problem with his rig? if you have any advice i am willing to try anything, thanks in advance!!! Title: Re: Asrock h110 btc+ Post by: 33eyal on January 17, 2018, 04:51:51 PM anyone?
Title: Re: Asrock h110 btc+ Post by: Vann on January 17, 2018, 05:08:40 PM Sounds like too much overclock or undervolt. Try lowering the memory overclock by 50 MHz or increasing the power limit on the GPU's that are crashing.
Title: Re: Asrock h110 btc+ Post by: mini miner on January 17, 2018, 05:29:13 PM im having the wierdest problem with my 12 gpu rig... specifications : 12 x rx580 8gb 4 gb ddr4 ram g4400 cpu 2 x 850w psu 1 x 1000w psu asrock h110 btc+ working on smos with 64gb usb stick my rig is doing 350 mh/s stable for 5-6 hours but then 1 of the cards (only from 06 to 11) gets disconnected and turns to 00.0 or sometimes it might turn all og the gpu's from 06 to 11 to 00.0 i tried changing the cards, risers and the cables. the only guess i have is its the mother board. does anyone here ever had this problem with this mothert board? or any similar problem with his rig? if you have any advice i am willing to try anything, thanks in advance!!! hie, i have same problem once, what is your clock speeds and check also powerlimits. in my case i adjusted power limits it is done.try once Title: Re: Asrock h110 btc+ Post by: klintistwood on January 17, 2018, 06:01:54 PM same kind of issue. I have tried to raise power limit up to a certain limit but it didn't solve the issue. I should probably try to remove power limit but then the whole rig consumes way too much electricity and becomes too hot (more power = more heat).
|