Title: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 15, 2018, 07:58:50 PM As the title states, I just bought an Avalon6, but I can't get it to mine. I have tried on both viabtc and nicehash. Both pools have recognized it as a worker, but it will not actively mine.
Any thoughts? Thanks Title: Re: Avalon6 will register as a worker, but will not mine Post by: fanatic26 on January 15, 2018, 09:50:53 PM Thought 1 would be you need to give us some more information to help you. Can you see anything on the miner status page? Have you looked into the system logs for problems?
Title: Re: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 16, 2018, 11:06:11 AM Thought 1 would be you need to give us some more information to help you. Can you see anything on the miner status page? Have you looked into the system logs for problems? Here are some different shots of the setup (usernames/address deleted) Also, the avalon6 is only flashing a yellow light Let me know if there is anything else I can send. Thanks for the help https://ibb.co/dcE5Mm https://ibb.co/nvjcZ6 https://ibb.co/kLN37R https://ibb.co/dBkjE6 API Logs https://ibb.co/kgB7Z6 https://ibb.co/cThs1m https://ibb.co/cThs1m System Log Code: Tue Jan 16 09:07:54 2018 daemon.warn odhcpd[410]: DHCPV6 SOLICIT IA_NA from 00030001a45d36214525 on br-lan: no addresses available (Moderator's note: This post was edited by frodocooper to use code tags for the system log.) Title: Re: Avalon6 will register as a worker, but will not mine Post by: -EOS- on January 16, 2018, 01:14:50 PM Also, the avalon6 is only flashing a yellow light Miner is idle.. https://en.bitcoin.it/wiki/Avalon6#Avalon6_LED And it looks like CGMiner does not see your A6. Restart CGMiner and see if that helps? If not, is the Controller plugged into the correct 4pin on the A6? Title: Re: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 16, 2018, 02:26:25 PM Also, the avalon6 is only flashing a yellow light Miner is idle.. https://en.bitcoin.it/wiki/Avalon6#Avalon6_LED And it looks like CGMiner does not see your A6. Restart CGMiner and see if that helps? If not, is the Controller plugged into the correct 4pin on the A6? Ya I noticed that it was idle I have it plugged into the left slot (I have tried the right one also) I did also try to restart cgminer as well pic of the back of the avalon6 https://ibb.co/fsa1SR Title: Re: Avalon6 will register as a worker, but will not mine Post by: -EOS- on January 16, 2018, 02:38:39 PM That's definitely where it goes...
Title: Re: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 16, 2018, 02:43:16 PM On the left?
Title: Re: Avalon6 will register as a worker, but will not mine Post by: -EOS- on January 16, 2018, 02:50:01 PM On the left? Yeah.... And restarting CGMiner doesn't detect the miner? Can't hurt to power cycle the A6 also Title: Re: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 16, 2018, 03:01:59 PM On the left? Yeah.... And restarting CGMiner doesn't detect the miner? Can't hurt to power cycle the A6 also I tried that also. Title: Re: Avalon6 will register as a worker, but will not mine Post by: -EOS- on January 16, 2018, 03:39:07 PM Anything showing in the kernel log on startup?
the snippet you posted is just the Pi asking for an IPv6 address Title: Re: Avalon6 will register as a worker, but will not mine Post by: fanatic26 on January 16, 2018, 04:55:06 PM So looking at your screenshot your RPi is not seeing the AUC adapter that goes inline between the RPi and the miner. Until you fix that part, your Avalon will never be seen.
In the CGminer status page, just under the pools section you will see "Avalon Devices" This is where you should see your AUC adapter, if you do not see the adapter there, you have a cabling or an AUC problem. Which AUC controller do you have? The smaller shrink wrapped version or the one with the hard plastic outer shell? They react differently so it is important to know which one you have. Title: Re: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 17, 2018, 04:57:00 AM So looking at your screenshot your RPi is not seeing the AUC adapter that goes inline between the RPi and the miner. Until you fix that part, your Avalon will never be seen. In the CGminer status page, just under the pools section you will see "Avalon Devices" This is where you should see your AUC adapter, if you do not see the adapter there, you have a cabling or an AUC problem. Which AUC controller do you have? The smaller shrink wrapped version or the one with the hard plastic outer shell? They react differently so it is important to know which one you have. Here is the controller I have connected https://ibb.co/mffsmm However, I also tried this controller, but I can't even find it on my network. https://www.parallelminer.com/wp-content/uploads/2017/11/IMG_3848.jpg Title: Re: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 17, 2018, 05:08:25 AM I also tried switching the cards around in the two controllers (they both came from parallel miner and are supposed to be setup for the avalon6)
Just thought I'd see if maybe the controller was bad Still having the same problem though... Title: Re: Avalon6 will register as a worker, but will not mine Post by: -EOS- on January 17, 2018, 01:14:22 PM However, I also tried this controller, but I can't even find it on my network. https://www.parallelminer.com/wp-content/uploads/2017/11/IMG_3848.jpg @twistedbelly I have this same one.. "Canaan by default set the PI with a static address at 192.168.0.100. " So you need to set your laptop IP to 192.168.0.99, mask 255.255.255.0, gateway 192.168.0.100, then plug directly into the Pi. You should then be able to open a browser on your laptop and point it at http://192.168.0.100. From there "if reach you controller’s web interface at http://192.168.0.100, then on the “General Setup” tab, change the “Protocol” from “Static address” to “DHCP client”. Then click “Save & Apply” and wait 30 seconds. " Now your Pi should be on your network Reference: https://canaan.io/question/how-can-i-change-my-avalonminer-controller-or-raspberry-pi-1-2-or-3-from-default-static-ip-address-to-automatic-dhcp-ip-address/ Title: Re: Avalon6 will register as a worker, but will not mine Post by: -EOS- on January 17, 2018, 08:22:43 PM Any news?
Title: Re: Avalon6 will register as a worker, but will not mine Post by: twistedbelly on January 18, 2018, 01:17:50 AM Any news? Actually, I talked with the company that sold it to me (parallel miner) and they pointed out that the bottom line on the config was missing That was an easy enough fix, and now it's working More Options: --avalon4-iic-detect https://ibb.co/eGTNK6 Title: Re: Avalon6 will register as a worker, but will not mine Post by: lightfoot on January 18, 2018, 02:48:13 AM Oooooooh! You have a Pi that is using the onboard SPI signaling to talk to the miner. Yes, you can do this, but it does require that line (and you can not daisy chain more miners on).
Glad it's working. Title: Re: Avalon6 will register as a worker, but will not mine Post by: -EOS- on January 18, 2018, 12:59:46 PM Good to know!!
|