|
Title: [Selling] LCD PiMiners (Pre-Configured) 0.37BTC Post by: wjohnson1988 on August 17, 2013, 05:51:05 AM Greetings BitCoin Mining Community,
I'm selling BitCoin PiMiners. Price is .37BTC. I can sell the kit without the Adafruit display (a basic PiMiner) for .22BTC. The KIT includes the following: 1 Raspberry Pi (Model B) configured with the MinePeon Operating System. 1 Adafruit LCD Display (Capable of Multiple Colors, not to be confused with the cheap Blue LCD Display offered by Adafruit - Fully Assembled). 1 Micro USB Power Adapter. 1 Raspberry Pi Case Enclosure (Note this is a customized case designed for the Adafruit RGB Pi Display) - Choose clear or black. 1 Wifi USB Adapter 1 HDMI Cable It also comes with a PDF Guide for configuration (pictures included), and fully configured MinePeon (30 Second Setup!). This also includes 1 free support setup session with me over the phone (or skype/teamviewer). This does not include mouse/keyboard, or USB Hub. I sell the Clear/Black PiMiner Cases for .15BTC (Free US Shipping), International shipping available, contact me directly. Please PM, Reply here, or contact me at wayne[at]wwjohnson[dot]me for more information. Payment Address: 17AJUdx34RHt47pQsDKxMntkngpe1rQpjt Shipping from Phoenix, Arizona. Bulk Discounts are Available! Contact me for pricing. Escrow orders are welcomed, but are at your expense. Pictures Below (Note ALL Units are capable of the colors below): http://s9.postimg.org/b09vrd7a7/image.jpg http://s9.postimg.org/r57i9hg9r/IMG_3732.jpg http://s11.postimg.org/dyje2uqcz/image.jpg http://s16.postimg.org/62nfzs64l/image.jpg http://s13.postimg.org/5p2a5b23r/image.jpg http://s13.postimg.org/fq74emf6v/image.jpg http://s23.postimg.org/4g5sydkob/image.jpg http://s10.postimg.org/4uxf8qt2x/image.jpg http://s24.postimg.org/rz0jmkagl/image.jpg Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: HellDiverUK on August 17, 2013, 10:43:02 AM That is VERY cool, nice job. Good luck with the sales. :)
Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: gektek on August 17, 2013, 09:33:59 PM This does not include an HDMI Cable, mouse/keyboard, or USB Hub. I'm new to the Pi world but would like to get in :P I like what you have going here but small noob question. You say it does not include the above items...besides the USB Hub for adding additional Erupters...are the HDMI Cable and mouse/keyboard NEEDED for operation or is this beast fairly self sufficient...as that is the point right? Also, on the USB Hub note...how big of a hub/how many Erupters can this bad boy handle? Thank you for your time! P.S. Its a long shot but might you be interested in a few 7950s as a trade for one of these units? Perhaps a low end desktop pc that I have been 'thinking' about selling for around the $350 price range anyway? Like I said...a long shot but as long as I have your attention thought I'd ask ;P Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: Swimmer63 on August 18, 2013, 01:07:53 AM Nice! How many hubs would work off of this for the USB Erupters?
Moonlightminer63 ;) Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 18, 2013, 01:35:35 AM Nice! How many hubs would work off of this for the USB Erupters? I personally have had 10 running, don't have the available ASIC's to test more with.Moonlightminer63 ;) I want to mention it's not compatible with USB 3.0 devices that aren't backwards compatible with USB 1.1/2.0 protocols. You have to buy a USB hub (2.0 recommended). Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 18, 2013, 01:42:16 AM This does not include an HDMI Cable, mouse/keyboard, or USB Hub. I'm new to the Pi world but would like to get in :P I like what you have going here but small noob question. You say it does not include the above items...besides the USB Hub for adding additional Erupters...are the HDMI Cable and mouse/keyboard NEEDED for operation or is this beast fairly self sufficient...as that is the point right? Also, on the USB Hub note...how big of a hub/how many Erupters can this bad boy handle? Thank you for your time! P.S. Its a long shot but might you be interested in a few 7950s as a trade for one of these units? Perhaps a low end desktop pc that I have been 'thinking' about selling for around the $350 price range anyway? Like I said...a long shot but as long as I have your attention thought I'd ask ;P Hey GekTek, Sorry but no trades welcome. As for your questions. It comes with everything you need to start mining with 1 USB Asic. If you want to Mine with more USB Asics, you would need a USB Hub. I have 2 DLINK hubs (link below) that seems to work quite well: http://www.amazon.com/D-Link-Hi-Speed-7-Port-Powered-DUB-H7/dp/B00008VFAF/ref=sr_1_1?ie=UTF8&qid=1376789995&sr=8-1&keywords=dlink+7-port+usb+hub I want to note, raspberry pi is not compatible with USB 3.0 hubs that aren't USB 1.1/2.0 compatible. So make sure you buy a hub compatible with the Pi! As for a Keyboard/Mouse, you only need them for initial setup. HDMI Cable isn't needed but for initial setup as well.. Once it's up and running, you can remotely administer it via SSH, and even then, you shouldn't need to do that since it's designed to work from initial setup and start automatically on reboot. Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 18, 2013, 01:51:25 AM Nice! How many hubs would work off of this for the USB Erupters? I personally have had 10 running, don't have the available ASIC's to test more with.Moonlightminer63 ;) I want to mention it's not compatible with USB 3.0 devices that aren't backwards compatible with USB 1.1/2.0 protocols. You have to buy a USB hub (2.0 recommended). Let me also mention, the Pi is capable of running BitFury's 400 Gh/s Units... So in this scenario, it's more than capable of handling multiple Asics (There are some out there running 24 port circular USB Hubs with PiMiner's and it runs flawless. Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: Swimmer63 on August 18, 2013, 02:12:01 AM Nice! How many hubs would work off of this for the USB Erupters? I personally have had 10 running, don't have the available ASIC's to test more with.Moonlightminer63 ;) I want to mention it's not compatible with USB 3.0 devices that aren't backwards compatible with USB 1.1/2.0 protocols. You have to buy a USB hub (2.0 recommended). 10 Erupters or 10 hubs? Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 18, 2013, 04:12:12 AM Nice! How many hubs would work off of this for the USB Erupters? I personally have had 10 running, don't have the available ASIC's to test more with.Moonlightminer63 ;) I want to mention it's not compatible with USB 3.0 devices that aren't backwards compatible with USB 1.1/2.0 protocols. You have to buy a USB hub (2.0 recommended). 10 Erupters or 10 hubs? 10 Eruptors. Unfortunately all of my Hub's are USB 3.0, and aren't backwards compatible with USB 1.1/2.0. I have 2 DLINK 7 port hubs that I have tested both daisy chaining, and individually connecting from the Pi and both work great. Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: gektek on August 18, 2013, 05:45:48 PM Hey GekTek, Sorry but no trades welcome. As for your questions. It comes with everything you need to start mining with 1 USB Asic. If you want to Mine with more USB Asics, you would need a USB Hub. I have 2 DLINK hubs (link below) that seems to work quite well: http://www.amazon.com/D-Link-Hi-Speed-7-Port-Powered-DUB-H7/dp/B00008VFAF/ref=sr_1_1?ie=UTF8&qid=1376789995&sr=8-1&keywords=dlink+7-port+usb+hub I want to note, raspberry pi is not compatible with USB 3.0 hubs that aren't USB 1.1/2.0 compatible. So make sure you buy a hub compatible with the Pi! As for a Keyboard/Mouse, you only need them for initial setup. HDMI Cable isn't needed but for initial setup as well.. Once it's up and running, you can remotely administer it via SSH, and even then, you shouldn't need to do that since it's designed to work from initial setup and start automatically on reboot. Thank you thank you for all the info! Savin muh pennies and following the thread. Hoping to be a customer soon :D Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 18, 2013, 05:51:52 PM Hey GekTek, Sorry but no trades welcome. As for your questions. It comes with everything you need to start mining with 1 USB Asic. If you want to Mine with more USB Asics, you would need a USB Hub. I have 2 DLINK hubs (link below) that seems to work quite well: http://www.amazon.com/D-Link-Hi-Speed-7-Port-Powered-DUB-H7/dp/B00008VFAF/ref=sr_1_1?ie=UTF8&qid=1376789995&sr=8-1&keywords=dlink+7-port+usb+hub I want to note, raspberry pi is not compatible with USB 3.0 hubs that aren't USB 1.1/2.0 compatible. So make sure you buy a hub compatible with the Pi! As for a Keyboard/Mouse, you only need them for initial setup. HDMI Cable isn't needed but for initial setup as well.. Once it's up and running, you can remotely administer it via SSH, and even then, you shouldn't need to do that since it's designed to work from initial setup and start automatically on reboot. Thank you thank you for all the info! Savin muh pennies and following the thread. Hoping to be a customer soon :D Sounds good! Look forward to it =) Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 19, 2013, 12:29:51 AM Bulk order pricing available!
Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: tabbek on August 19, 2013, 12:39:21 AM Where's the case from? Didn't see it on adafruit. I like the buttons :)
Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: bobsag3 on August 19, 2013, 12:49:48 AM Would you be able to also get this to work with the ASIC Blades? Having to use a PC to run a python script for them right now but If I could get this i would prefer to do so. Also looks awesome!
Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 19, 2013, 01:20:02 AM Where's the case from? Didn't see it on adafruit. I like the buttons :) The case isn't from adafruit, it's from a specialized Laser CNC Vendor that I use. BTS is the name of the company. Would you be able to also get this to work with the ASIC Blades? Having to use a PC to run a python script for them right now but If I could get this i would prefer to do so. Also looks awesome! Yeah I'm pretty sure it would work with the ASIC Blades. I don't personally have one to configure and test with. If you were able to ship me one, I'd be happy to offer a significant discount on a PiMiner for allowing me to certify the hardware and build a base image for it's use. Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: jprice on August 19, 2013, 05:06:21 AM Purchased one
Transaction https://blockchain.info/tx/9473908c52aff8e70d9ab729ba83237b16ff111af527b499d2fa9dddae0f09b0 send an extra .1 just for the hell of it Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 19, 2013, 05:11:16 AM Purchased one Transaction https://blockchain.info/tx/9473908c52aff8e70d9ab729ba83237b16ff111af527b499d2fa9dddae0f09b0 send an extra .1 just for the hell of it Thanks for the purchase! Ill be contacting you via pm to tailor the unit to your network (static ip/start up scripts/number of USB Asics you plan to use) with the goal of making it 100% plug and play for you :) Thanks again for your purchase! Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: jprice on August 19, 2013, 05:14:03 AM Purchased one Transaction https://blockchain.info/tx/9473908c52aff8e70d9ab729ba83237b16ff111af527b499d2fa9dddae0f09b0 send an extra .1 just for the hell of it Thanks for the purchase! Ill be contacting you via pm to tailor the unit to your network (static ip/start up scripts/number of USB Asics you plan to use) with the goal of making it 100% plug and play for you :) Thanks again for your purchase! Couldn't find an escrow and I got tired of waiting so I'm putting BTC3.5 of trust in you. Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: lyth0s on August 19, 2013, 05:33:48 AM . Payment Address: 17AJUdx34RHt47pQsDKxMntkngpe1rQpjtx I think you have an extra "x" at the end of your address, idk if it was intentional for some reason or another but I thought'd I'd let you know :) Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: Micon on August 19, 2013, 06:42:06 AM Really want to make "hashing wall art" with these 36 BE's I have firing away... a pi with a slick case and cool display is basically what I'm talking about
OP has beautiful product / obvious skills / would love to make something beautiful / cool / fun out of all these BE's when they become obsolete soon. Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 19, 2013, 06:56:02 AM . Payment Address: 17AJUdx34RHt47pQsDKxMntkngpe1rQpjtx I think you have an extra "x" at the end of your address, idk if it was intentional for some reason or another but I thought'd I'd let you know :) Oh my goodness! Thankyou so much for finding that! I must have fatfingered a key on that line by mistake when writing the post. Thankyou =) Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 19, 2013, 08:46:43 AM Really want to make "hashing wall art" with these 36 BE's I have firing away... a pi with a slick case and cool display is basically what I'm talking about OP has beautiful product / obvious skills / would love to make something beautiful / cool / fun out of all these BE's when they become obsolete soon. It could be done! I know i'm on the same page, I'm working on building my wall of miners. PiMiner's are nice because they're extremely low power, and the USB Asic's are as well.. They just mesh so well together. Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 19, 2013, 09:07:37 AM Now Including HDMI Cables in All Purchases!
Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: FreedomCoin on August 19, 2013, 05:52:16 PM how will the readout work with multiple BEs plugged in? Will it cycle through?
Title: Re: Selling PiMiners (Pre-Configured & Assembled) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 19, 2013, 08:21:56 PM how will the readout work with multiple BEs plugged in? Will it cycle through? You can use multiple block erupters concurrently. If you would like to run different mining pools, I could re-write the code to cycle through the different mining pools. It wouldn't take much for me to do it. Let me know if that's what you're referring to. Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 20, 2013, 02:58:56 PM Units have shipped!
Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 20, 2013, 05:03:30 PM Black Case added as an option!
http://s9.postimg.org/r57i9hg9r/IMG_3732.jpg Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 20, 2013, 05:47:30 PM PiMiner Update
Also Selling PiMiner's with 10xUSB Block Erupters for 8.2BTC Shipped Here's the full list of items in the package: 1 Raspberry Pi (Model B) configured with the Raspian Weezy Operating System (SD Card Included). 1 Adafruit LCD Display (Assembled). 1 Micro USB Power Adapter. 1 Raspberry Pi Case Enclosure (Note this is a customized case for the Adafruit RGB Pi Display) - Choose clear or black. 1 Wifi USB Adapter 10 USB ASICMiner Block Erupter 2 USB Powered HUBS (DLINK 7 Port) 1 HDMI Cable Contact me for more details or to place an order! Escrow accepted! Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 21, 2013, 01:28:17 AM Attention BitMiner Community!
Starting today (8/20/2013) until the 15th of October, any customer who purchases a PiMiner Kit from me will be entered into our Giveaway Raffle. All customers who purchase a PiMiner kit from me will be entered in to win the following: 1 Raspberry Pi (Model B) configured with the Raspian Weezy Operating System (SD Card Included). 1 Adafruit LCD Display (Assembled). 1 Micro USB Power Adapter. 1 Clear Raspberry Pi Case Enclosure (Note this is a customized case for the Adafruit RGB Pi Display). 1 Wifi USB Adapter 5 USB ASICMiner Block Erupter 1 USB Powered HUBS (DLINK 7 Port) 1 HDMI Cable Contingent on the number of purchases (minimum 10),there will be a second place price of the following: 1 Raspberry Pi (Model B) configured with the Raspian Weezy Operating System (SD Card Included). 1 Adafruit LCD Display (Assembled). 1 Micro USB Power Adapter. 1 Clear Raspberry Pi Case Enclosure (Note this is a customized case for the Adafruit RGB Pi Display) 1 Wifi USB Adapter 1 USB ASICMiner Block Erupter 1 HDMI Cable 1 Entry Per PiMining Kit Purchased (3 entries for orders with 10+ Block Erupters). Domestic Shipping Free, International Shipping at winners expense. Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: bronan on August 21, 2013, 01:45:16 AM For those who ask about how many usb devices can be connected to the raspberry pi.
The correct answer is still 126 but they all must get enough juice to run so the usb hubs have to be ofcourse powered ones The other issue is that each and every hub is seen as another device and therefor you loose another spot for a block erupter Since you need to daisy chain many hubs you loose many spots for the erupters or buy the massive professional boards But i do not think many want to spend such huge amounts of cash on that large usb hubs. Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 21, 2013, 02:07:08 AM For those who ask about how many usb devices can be connected to the raspberry pi. The correct answer is still 126 but they all must get enough juice to run so the usb hubs have to be ofcourse powered ones The other issue is that each and every hub is seen as another device and therefor you loose another spot for a block erupter Since you need to daisy chain many hubs you loose many spots for the erupters or buy the massive professional boards But i do not think many want to spend such huge amounts of cash on that large usb hubs. Ah excellent feedback! I've only personally tested 14 ASIC's attached to a single PiMiner. Glad to know I can scale it out that far! Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: jprice on August 21, 2013, 06:14:44 PM Received my PiMiner
Waiting on the case to arrive now. Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 21, 2013, 09:13:30 PM Received my PiMiner Waiting on the case to arrive now. Glad to hear you also got the unit running :). Your case will arrive today (sorry for the delay, the last one had a broken side panel from shipping). Ill get your case in the mail tomorrow :) Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: jprice on August 21, 2013, 09:17:11 PM Received my PiMiner Waiting on the case to arrive now. Glad to hear you also got the unit running :). Your case will arrive today (sorry for the delay, the last one had a broken side panel from shipping). Ill get your case in the mail tomorrow :) Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 21, 2013, 09:23:48 PM Received my PiMiner Waiting on the case to arrive now. Glad to hear you also got the unit running :). Your case will arrive today (sorry for the delay, the last one had a broken side panel from shipping). Ill get your case in the mail tomorrow :) Haha no problem dude :). Did your wife like the prize? Lol Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: jprice on August 21, 2013, 09:32:22 PM Received my PiMiner Waiting on the case to arrive now. Glad to hear you also got the unit running :). Your case will arrive today (sorry for the delay, the last one had a broken side panel from shipping). Ill get your case in the mail tomorrow :) Haha no problem dude :). Did your wife like the prize? Lol She just makes a big deal everytime I buy a new "toy". Its easier just to make her think I won it than have to listen to her. Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 22, 2013, 12:42:44 AM Received my PiMiner Waiting on the case to arrive now. Glad to hear you also got the unit running :). Your case will arrive today (sorry for the delay, the last one had a broken side panel from shipping). Ill get your case in the mail tomorrow :) Haha no problem dude :). Did your wife like the prize? Lol She just makes a big deal everytime I buy a new "toy". Its easier just to make her think I won it than have to listen to her. Mines the same way =) Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: gektek on August 22, 2013, 04:01:38 AM Mines the same way =) wow I'm lucky I guess. Mine wants me to buy more USB miners cuz they are so 'cute' hahaha Also why I'm looking into one of your units...its actually for her cuz she LOVES pretty lights and has grand plans to mount this all fancy on the wall :D :D Title: Re: [Selling] PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 22, 2013, 04:24:24 AM Mines the same way =) wow I'm lucky I guess. Mine wants me to buy more USB miners cuz they are so 'cute' hahaha Also why I'm looking into one of your units...its actually for her cuz she LOVES pretty lights and has grand plans to mount this all fancy on the wall :D :D Haha lucky you :). Let me know when you want to go over the custom case so you can walk mount. I've been working on a design myself, you sparked my interest :) Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 23, 2013, 12:41:35 AM 2 More PiMiner's fully assembled ready to ship (Can have in the mail tomorrow!)
http://s21.postimg.org/bi0hbb0dj/image.jpg Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: bbxx on August 23, 2013, 04:13:17 PM Set the price about 1btc + shipping and people would buy.
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 23, 2013, 05:14:50 PM Set the price about 1btc + shipping and people would buy. Not possible... Wish I could, but it's not economically feasible. I sell units all day on Ebay without issue ^_^. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: hayek on August 23, 2013, 05:37:33 PM It's cool but how is this not just the $100 adafruit pi package with a $5 eruptor attached (I think I'm being generous about the eruptor price)
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 23, 2013, 07:27:58 PM It's cool but how is this not just the $100 adafruit pi package with a $5 eruptor attached (I think I'm being generous about the eruptor price) Again no ones forcing you to purchase my product. If you feel you can get it cheaper, feel free, but you won't be able to change my mind. I don't work for free, nor will I sell my product for free. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: Stinky_Pete on August 23, 2013, 07:43:54 PM What is postage to UK?
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 23, 2013, 09:00:41 PM What is postage to UK? Add .15BTC for Shipping to UK Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: peonminer on August 23, 2013, 11:43:09 PM Can these run multiple Jalapenos?
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: pyra-proxy on August 23, 2013, 11:45:52 PM Have you considered selling these on bitmit?
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 24, 2013, 01:48:09 AM Have you considered selling these on bitmit? Already listed. =) Can these run multiple Jalapenos? I'm not sure! I would assume so, because you can launch based on device port (ttyUSB on linux). You would just have to launch multiple instances of CGMiner. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 24, 2013, 01:56:25 AM Have you considered selling these on bitmit? I'm already ID Verified and selling on BitMit but thanks for the suggestion ^_^. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: ACeZ on August 26, 2013, 12:47:37 AM Cool kit! I don't have a use for one but these are nice.
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 26, 2013, 02:56:06 AM Cool kit! I don't have a use for one but these are nice. Thanks! There's a lot of other uses I've found. Xbox Media Centers are a nice use for these as well =). Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: cwil on August 29, 2013, 12:57:24 AM I have purchased one PiMiner. Thank you.
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 29, 2013, 04:09:39 AM I have purchased one PiMiner. Thank you. Shipped :). Same day haha. Thanks for your order :) Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 30, 2013, 04:35:14 AM Bump.
Also willing to offer Xbox Media Center setups! Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 30, 2013, 07:32:30 AM Tonight through this Monday, in honor of Labor Day, prices will be cut!
PiMiners through this holiday will be cut to 2.5BTC. Anyone who orders extra USB ASICs will receive them at .34BTC per stick! USB Hubs (7 port) at .25 BTC Per! I have multiple units I'm stock, ready to ship same day! Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 30, 2013, 03:14:20 PM The sales good through Monday! Get it while its Hott!
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: wjohnson1988 on August 30, 2013, 10:44:30 PM Tonight through this Monday, in honor of Labor Day, prices will be cut! PiMiners through this holiday will be cut to 2.5BTC. Anyone who orders extra USB ASICs will receive them at .34BTC per stick! USB Hubs (7 port) at .25 BTC Per! I have multiple units I'm stock, ready to ship same day! Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3.4BTC or $360 PP/Dwolla Accepted Post by: BitCoiner2012 on August 30, 2013, 11:36:54 PM When price goes down, PM me. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3BTC Post by: wjohnson1988 on August 31, 2013, 09:41:54 AM Just got another 2 sent out! Get them while they're hott!
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3BTC Post by: bbxx on September 04, 2013, 06:17:58 PM Bump Please update price. For 3 btc i can buy 3 great tablets with android and great display and tiny power usage. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3BTC Post by: wjohnson1988 on September 06, 2013, 05:52:11 AM Bump Please update price. For 3 btc i can buy 3 great tablets with android and great display and tiny power usage. The price is accurate. Tablets and PiMiners are completely different devices... Especially considering BTC dropped by .012% in the last 2 days. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3BTC Post by: bbxx on September 07, 2013, 08:18:33 PM Bump Please update price. For 3 btc i can buy 3 great tablets with android and great display and tiny power usage. The price is accurate. Tablets and PiMiners are completely different devices... Especially considering BTC dropped by .012% in the last 2 days. tablets are better :) you can mine on them too there is a linux inside bfl is shipping CrapRigs with Nexus7 Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3BTC Post by: wjohnson1988 on September 07, 2013, 10:25:51 PM Bump Please update price. For 3 btc i can buy 3 great tablets with android and great display and tiny power usage. The price is accurate. Tablets and PiMiners are completely different devices... Especially considering BTC dropped by .012% in the last 2 days. tablets are better :) you can mine on them too there is a linux inside bfl is shipping CrapRigs with Nexus7 Yeah but PiMiners are the size of a credit card and mine are pretty unique... Plus power requirements are far superior. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 3BTC Post by: mberg2007 on September 07, 2013, 10:39:03 PM I think your PiMiner is a very cool gadget and I can understand why you want 2.5 btc for it.
However, you should also realize that from a mining perspective, this unit is never, ever going to earn 2.5 btc. Cool gadget, really bad investment. Which is a shame because you obviously put a lot of time into this. You'll get some orders for sure, just not from serious miners. -Michael Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.5BTC With Block Erupter Post by: wjohnson1988 on September 12, 2013, 06:42:07 AM I receive another batch of PiMiners tomorrow! Get your orders placed while I have them in stock!
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.5BTC With Block Erupter Post by: wjohnson1988 on September 16, 2013, 03:43:15 AM Another one shipped! Another shipment arrives Tuesday! Place your orders!
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.5BTC With Block Erupter Post by: wjohnson1988 on September 27, 2013, 07:12:33 AM A few more in stock! Come get them! Shipping tomorrow!
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.5BTC With Block Erupter Post by: wjohnson1988 on October 08, 2013, 06:26:37 PM I'm proud to be the first to now offer the unit with MinePeon! Fully Web-controlled and customized to support the Adafruit Display!
Place your orders! Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.5BTC With Block Erupter Post by: pyra-proxy on October 08, 2013, 08:14:14 PM I'm proud to be the first to now offer the unit with MinePeon! Fully Web-controlled and customized to support the Adafruit Display! Place your orders! http://mineninja.com/ (http://mineninja.com/) already offered this, or did you mean on a raspberry pi instead of the beagle bone black? Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.25BTC With Block Erupter Post by: wjohnson1988 on October 08, 2013, 08:50:36 PM I'm proud to be the first to now offer the unit with MinePeon! Fully Web-controlled and customized to support the Adafruit Display! Place your orders! http://mineninja.com/ already offered this, or did you mean on a raspberry pi instead of the beagle bone black? On a Raspberry Pi with an Adafruit integrated LCD display. It's never been done, or at least it hasn't been publicly released/sold like I'm doing ^_^. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.25BTC With Block Erupter Post by: wjohnson1988 on October 13, 2013, 02:41:37 AM To the top
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.25BTC With Block Erupter Post by: Swimmer63 on October 13, 2013, 03:20:07 AM To the top Did you mail the mine peon card for me?Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.25BTC With Block Erupter Post by: wjohnson1988 on October 16, 2013, 08:10:27 PM To the top Did you mail the mine peon card for me?Hand delivered to you today ^_^. Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.25BTC With Block Erupter Post by: wjohnson1988 on July 06, 2014, 01:33:13 AM Prices updated
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.25BTC With Block Erupter Post by: crashoveride54902 on July 06, 2014, 08:27:53 PM Prices updated might wanna update your price in thread title as well ;) Title: Re: [Selling] LCD PiMiners (Pre-Configured) 2.25BTC With Block Erupter Post by: wjohnson1988 on July 06, 2014, 08:49:13 PM Prices updated might wanna update your price in thread title as well ;) Oh nice catch ^_^ Ty Title: Re: [Selling] LCD PiMiners (Pre-Configured) 0.37BTC Post by: wjohnson1988 on July 07, 2014, 08:04:32 AM Up
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 0.37BTC Post by: wjohnson1988 on July 07, 2014, 05:55:25 PM ^
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 0.37BTC Post by: wjohnson1988 on July 09, 2014, 01:14:36 AM ^^
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 0.37BTC Post by: ThomasCrowne on July 09, 2014, 06:45:11 AM Digging on the sexy clear case in OP.
Title: Re: [Selling] LCD PiMiners (Pre-Configured) 0.37BTC Post by: wjohnson1988 on July 13, 2014, 05:44:12 PM Digging on the sexy clear case in OP. Thanks =) Title: Re: [Selling] LCD PiMiners (Pre-Configured) 0.37BTC Post by: wjohnson1988 on July 20, 2014, 09:28:26 PM ^
|
