|
Title: Baikal X10 issue / not reachable Post by: MarcusD on January 18, 2018, 12:23:41 PM Hi all,
i have a Baikal X10 after few hours the X10 it not reachable via Web Interface and in Nicehash itīs also marked as offline. I can see that the miner is blinking red / blue. Any ideas ? Thanks a lot Marcus Title: Re: Baikal X10 issue / not reachable Post by: tomwrx on January 18, 2018, 02:15:47 PM Hi all, i have a Baikal X10 after few hours the X10 it not reachable via Web Interface and in Nicehash itīs also marked as offline. I can see that the miner is blinking red / blue. Any ideas ? Thanks a lot Marcus Check miners ip adress with baikal scaner or turn it off from electricity wait for 5 minutes and try to conect to interface again. Title: Re: Baikal X10 issue / not reachable Post by: AndrentMcNa on January 18, 2018, 02:20:29 PM Hi all, i have a Baikal X10 after few hours the X10 it not reachable via Web Interface and in Nicehash itīs also marked as offline. I can see that the miner is blinking red / blue. Any ideas ? Thanks a lot Marcus Check miners ip adress with baikal scaner or turn it off from electricity wait for 5 minutes and try to conect to interface again. 1. Check the IP if not correct (if you set DHCP, it gets a new ip after it reboot) 2. Restart miner in case it is hanging 3. Press reset button in case some wrong parameter. Title: Re: Baikal X10 issue / not reachable Post by: f12345 on August 30, 2018, 04:43:42 PM This happened to me as well because I deleted all default settings in miner section. If Baikal cannot connect to any pool it looks like its down w blue blinking light.
I hit Restore and gave Baikal a reserved IP address + rebooted and it works again. I didn't have to Flash the drive. Hope this helps |