Title: Avalon Batch 3 PSU Post by: homburg on August 20, 2013, 12:19:47 PM Per i fortunati/sfortunati (a second dei punti di vista) futuri possessori di Avalon Batch 3 senza PSU... occhio a quando montate la PSU. Se riceverete un modello come il mio ci sono un attacco 24PIN, 3 attacchi PCIE (neri) e 2 attacchi EPS (bianchi). NOTATE che PCIE non e' EPS (i quadrati dei pin sono diversi e non entrano) e molti PSU anche buoni (tipo i miei Glacial) non hanno l' EPS.
Montare meno cavi del previsto puo' farvi fondere l' Avalon come da thread: https://bitcointalk.org/index.php?topic=269802.0 per capire la differenza tra EPS/PCIE leggete: http://www.rage3d.com/board/showthread.php?t=33928077 https://bitcointalk.org/index.php?topic=140539.2380 I connected *all* the power connectors on my b3's and they all work fine: 1 x 24-pin mobo connector 2 x EPS 12v 3 x PCI-E 8-pin I looked around and didn't see any directions on the forums about which to connect, and Avalon shipped with no documentation, so I figured it's a power-hungry thing and why not just connect them all. You cannot substitute the pci-e for the eps connector. Se riesco a farlo funzionare (domani arriva la PSU nuova) siete liberi di contattarmi per consigli. INCLUSO IL FATTO CHE LO MANDANO con delle viti che sono quasi impossibili da svitare e vi serve una brugola! |