|
Title: 10 X Ztex 1.15y ~8.5 GH/s Post by: turtle83 on August 31, 2013, 08:57:02 PM Available for auction 10 Ztex 1.15y (licensed - a.k.a. clone) miners in hand.
Each hashing at ~850 MH/s. I have been hashing with these without fuss for months. Terms:- 1. 10 Units available. 2. Starting bid : 0.1 BTC per board. 3. Reserve: 0.6 BTC per bord 4. BIN : 2 BTC per board 5. Auction Ends : September 3 00:00:00 UTC 2013 (forum clock decides) - no last moment extensions. 5. Escrow : (if needed) John K. Buyer pays escrow fee. 6. Shipping : From Thailand. I will pay for shipping sending by EMS if all 10 units goes to single buyer in same shipment. If you want another method then you need to pay the shipping costs.. (Just to play it safe, in case the delivery is to some obscure country where EMS asks for a ridiculous price, I reserve the right to decline bid, or ask for some extra shipping costs) 7. Package includes boards and power connectors only. You need to supply it with heatsinks, airflow and PSU. I can include the required 12V 5A power bricks, usb cables free of charge if buyer agrees to pay full shipping costs. You would still need to attach heatsinks + fans for cooling. All bids are binding. Do your ROI calculations before bidding. FPGA, unlike ASIC, has other uses also, so they potentially hold resale value. Bid format :- Quote 2@0.5 Means you are bidding for 2 units at 0.5 BTC each for a total of 1 BTC.Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: turtle83 on August 31, 2013, 08:57:48 PM Additional: Minimum increment 0.1 BTC
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: chanberg on August 31, 2013, 08:58:57 PM 10 @ 0.1
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: tigerfree on September 01, 2013, 12:47:23 AM i can bid 2@0.2
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: Polyatomic on September 01, 2013, 06:31:37 AM 10 x 0.35 with heatsinks.
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: turtle83 on September 02, 2013, 12:37:12 PM 10 x 0.35 with heatsinks. I am not including heatsinks as stated clearly in terms. Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: rammy2k2 on September 02, 2013, 12:46:28 PM i owned boards like these, they run so smooth, very good quality
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: t309 on September 02, 2013, 01:34:02 PM 2@0.45
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: t309 on September 02, 2013, 01:45:02 PM 10 x 0.35 with heatsinks. is bad order?
my order 2@0.45 annul! 10@0.3 Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: turtle83 on September 02, 2013, 01:52:39 PM Code: Bidder Quantity Price * annulled cause invalid condition with bid. Quote Package includes boards and power connectors only. You need to supply it with heatsinks, airflow and PSU. I can include the required 12V 5A power bricks, usb cables free of charge if buyer agrees to pay full shipping costs. You would still need to attach heatsinks + fans for cooling Meaning. If I pay for shipping (which i will do if all 10 units are shipped to same buyer), I only include the boards and power connector. If buyer pays for shipping, i will add power bricks and usb cables. In both cases, buyer needs to use their own heatsinks and fans. About 10 hours remaining. Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: JLM on September 02, 2013, 01:54:11 PM 10@0.4
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: turtle83 on September 02, 2013, 02:53:19 PM Code: Bidder Quantity Price Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: Bogart on September 02, 2013, 07:23:00 PM I have on-hand a bunch of brand new heatsink/fan coolers for these, and also the green snap-in DC wiring blocks. I'd sell a complete set of 4 plus the wiring block for 0.1 BTC + shipping. PM me if you need any.
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: t309 on September 02, 2013, 07:29:42 PM 2@0.5
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: turtle83 on September 02, 2013, 07:34:41 PM Code: Bidder Quantity Price Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: newminer7950 on September 03, 2013, 10:05:05 AM 1@0.5
Title: Re: 10 X Ztex 1.15y ~8.5 GH/s Post by: turtle83 on September 03, 2013, 12:37:23 PM 1@0.5 Sorry auction ended without winner... |