|
Title: antminer s9 - stop at 80 degrees setting Post by: jlonghi on February 04, 2018, 04:09:50 AM I configure my antminers through ssh and not the web interface. I noticed that on the web interface when you specify stop at 80 degrees it adds bitmain-notempoverctrl = true to the config file.
My miners are going over 80 degrees any idea why this feature isnt working? Also does this feature shut off the mining software and bring it back up later or does it completely shut off the antminer? Title: Re: antminer s9 - stop at 80 degrees setting Post by: fanatic26 on February 05, 2018, 05:53:49 PM Because that 80c limit was for the s7. The S9 runs up to 105c, you for sure dont want it to stop hashing at 80c. When the miner hits its actual thermal shutoff temp it will show all chips with xxxx in the status and you have to manually restart it to get it mining again.
Title: Re: antminer s9 - stop at 80 degrees setting Post by: jlonghi on February 05, 2018, 07:22:23 PM ah that makes sense, i just took a look at the web interface. Thanks for the info.
|