Title: [MINING rig] [Windows 10] NMI_HARDWARE_FAILURE when multiple gpus plugged in Post by: roalecu on February 09, 2018, 10:37:25 AM Hello guys,
I just setup my mining rig having only one plugged gpu (AMD r9 380 Nitro). All good, successfully installed windows 10, windows 10 updates, crimson amd 15.12 drivers, claymore 9.7 beta. I restarted the rig after all the programs were installed. I mined a bit using claymore to monitor the temperatures, power consumption , stability, etc. Again, everything worked fine. I shut down the rig to plug the rest of the gpus (another 4 AMD r9 380). After that I started the rig, but the windows won't start due to blue screen NMI_HARDWARE_FAILURE. Ok, then I unplugged 3 of the cards resulting in only 2 plugged-in gpu cards. I restarted the rig several times to see if something changes in the behaviour. I observed two cases :
Tried to change the pci slots, the risers, etc. The problems remain. I unplugged one more graphic card -> the rig is working fine using only one card. The components of the rig are:
I went through bios but those are the only configurations for PCI slots (when 4 gpus are plugged in): https://image.ibb.co/cDk21H/IMG_0568.jpg The exactly same behaviour I encountered with default AMD drivers installed by windows Any ideas? Thanks! Title: Re: [MINING rig] [Windows 10] NMI_HARDWARE_FAILURE when multiple gpus plugged in Post by: 0xcosmos on February 10, 2018, 04:34:31 AM what is your motherboard model number?
Title: Re: [MINING rig] [Windows 10] NMI_HARDWARE_FAILURE when multiple gpus plugged in Post by: roalecu on February 10, 2018, 10:29:47 AM A61TR1
06147-3 Bios spi1 ver.0122. PS: I tested the rig using my PC’s mobo (gigabyte ga-somerhing) and all 5 gpus are working. |