|
Title: Problems with the new Blade Miner (Blue PCB) Post by: Yinero on September 17, 2013, 12:12:29 PM So I received one of the newer Asicminer blades (the ones with the blue PCB board) and got power to it and everything. The only problem is the networking. I have it connected to a switch and everything else can be accessed through the switch. The problem is when I type in the configuration IP address in my web browser nothing happens. It just takes for ever to load and then times out every time. Since I have power to the blade I know that isn't the issue. But the way my network is setup is pretty standard. Cable Modem > Router > Switch > Blade.
Any help is appreciated and if you guys need any more info to help solve this problem please just let me know. I want to get this up and running asap. Title: Re: Problems with the new Blade Miner (Blue PCB) Post by: rammy2k2 on September 17, 2013, 02:07:34 PM plug it in to the router, go to router admin panel, and get blade IP
Title: Re: Problems with the new Blade Miner (Blue PCB) Post by: Yinero on September 17, 2013, 04:01:27 PM plug it in to the router, go to router admin panel, and get blade IP Did that, found the devices ip but it did nothing but say. "Problem Loading Page" Title: Re: Problems with the new Blade Miner (Blue PCB) Post by: TheSwede75 on September 17, 2013, 04:10:04 PM plug it in to the router, go to router admin panel, and get blade IP Did that, found the devices ip but it did nothing but say. "Problem Loading Page" Your router is most likely blocking the port used. Figure out port and set up forwarding or open it for all connected devices. Title: Re: Problems with the new Blade Miner (Blue PCB) Post by: Yinero on September 17, 2013, 05:23:58 PM plug it in to the router, go to router admin panel, and get blade IP Did that, found the devices ip but it did nothing but say. "Problem Loading Page" Your router is most likely blocking the port used. Figure out port and set up forwarding or open it for all connected devices. I'm a gamer, with that said lol I have my ports forwarded and nothing like that set up on my router to block things. Every other device I'm using for mining I can connect to it just fine. They all run very similar to the asicminer blade, I just can't connect to it. Title: Re: Problems with the new Blade Miner (Blue PCB) Post by: bbxx on September 17, 2013, 05:28:04 PM plug it in to the router, go to router admin panel, and get blade IP Did that, found the devices ip but it did nothing but say. "Problem Loading Page" Your router is most likely blocking the port used. Figure out port and set up forwarding or open it for all connected devices. I'm a gamer, with that said lol I have my ports forwarded and nothing like that set up on my router to block things. Every other device I'm using for mining I can connect to it just fine. They all run very similar to the asicminer blade, I just can't connect to it. Port could be 8000 or other Please preform hardware reset It will be responding at 192.168.1.254:8000 Title: Re: Problems with the new Blade Miner (Blue PCB) Post by: BigJon901 on September 17, 2013, 06:42:51 PM Take a look at this, https://bitcointalk.org/index.php?topic=293269.msg3141315#msg3141315.
|