Bitcoin Forum

Bitcoin => Mining support => Topic started by: Plazmotech on September 18, 2013, 04:55:08 AM


Title: [Repost] [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: Plazmotech on September 18, 2013, 04:55:08 AM
I just bought a ASICMINER USB and started mining.

I am on OSX 10.8.5 and I keep getting this error

Code:
 cgminer version 3.4.3 - Started: [2013-09-17 21:49:25]
--------------------------------------------------------------------------------
 (5s):148.8M (avg):298.5Mh/s | A:22  R:0  HW:0  WU:5.0/m
 ST: 2  SS: 0  NB: 1  LW: 56  GF: 0  RF: 0
 Connected to mint.bitminter.com diff 1 with stratum as user *********
 Block: 0006a0094391c056...  Diff:113M  Started: [21:49:28]  Best share: 70
--------------------------------------------------------------------------------
 [P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
 GPU 0:                | OFF   /3.568Mh/s | A: 1 R:0 HW:0 WU: 0.2/m I: 1
 AMU 0:                | 305.6M/294.9Mh/s | A:21 R:0 HW:0 WU: 4.8/m
--------------------------------------------------------------------------------

 [2013-09-17 21:53:21] AMU0: TIMEOUT GetResults took 3001ms but was 100ms
 [2013-09-17 21:53:24] AMU0: TIMEOUT GetResults took 2997ms but was 100ms
 [2013-09-17 21:53:27] AMU0: TIMEOUT GetResults took 3000ms but was 100ms
 [2013-09-17 21:53:30] AMU0: TIMEOUT GetResults took 2999ms but was 100ms
 [2013-09-17 21:53:33] AMU0: TIMEOUT GetResults took 3000ms but was 100ms
 [2013-09-17 21:53:36] AMU0: TIMEOUT GetResults took 3001ms but was 100ms
 [2013-09-17 21:53:39] AMU0: TIMEOUT GetResults took 2993ms but was 100ms
 [2013-09-17 21:53:42] AMU0: TIMEOUT GetResults took 3000ms but was 100ms
 [2013-09-17 21:53:45] AMU0: TIMEOUT GetResults took 3001ms but was 100ms
 [2013-09-17 21:53:48] AMU0: TIMEOUT GetResults took 3001ms but was 100ms
 [2013-09-17 21:53:51] AMU0: TIMEOUT GetResults took 3001ms but was 100ms

How do I fix this? I have relatively fast internet so I'm not sure why this is happening.

I have tried getting a powered USB hub but that doesn't help.

P.S. is there a way to turn off the LED from blinking?

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: Plazmotech on September 18, 2013, 11:18:07 PM
Bump

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: SirMintALot on September 19, 2013, 09:15:21 AM
I had the same problem on windows once when i plugged two erupters in a hub that wasnt able to supply enough power. Have you plugged it directly into a USB 2.0 port (without a powered hub)?

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: Plazmotech on September 19, 2013, 01:44:47 PM
Yes.

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: Zanatos666 on September 19, 2013, 03:04:07 PM
What is your command line/config file? Have you tried a powered hub?

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: SirMintALot on September 19, 2013, 06:03:25 PM
use a powered hub or plug it into a USB 3.0 port. That should probably help.

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: Plazmotech on September 19, 2013, 11:33:37 PM
Quote from: SirMintALot on September 19, 2013, 06:03:25 PM
use a powered hub or plug it into a USB 3.0 port. That should probably help.

I have used a USB 3.0 port, however, the USB is 2.0 so I don't expect that to help. I'll try buying a powered hub then.

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: Plazmotech on September 23, 2013, 01:40:13 AM
Quote from: SirMintALot on September 19, 2013, 06:03:25 PM
use a powered hub or plug it into a USB 3.0 port. That should probably help.

Still isn't working.

Title: Re: [Bounty: 0.05 BTC] AMU0: TIMEOUT GetResults took n-ms but was 100ms
Post by: ssateneth on September 23, 2013, 01:46:53 AM
Have you tried it on a different OS to see if the problem is OS specific? I've never got that error, using win7 x64


Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines