|
Title: Help with Blade and Proxy Issues Post by: Swimmer63 on September 24, 2013, 02:49:16 AM I have read through all the guides and had this working briefly but got interrupted and did not save something right.
Can't seem to get the proxy to pick up the miner. Can anyone look at these and see if I'm doing something obviously newb? Bat file for Proxy - https://i.imgur.com/AzgkEg3.png (https://i.imgur.com/AzgkEg3.png) Proxy - https://i.imgur.com/mfbbcWj.png Blade Settings - https://i.imgur.com/C6g9JN2.png Title: Re: Help with Blade and Proxy Issues Post by: LHB on September 24, 2013, 05:32:18 AM try changing the blades IP to a lower number. that may not be in range set for your router. I had the same problem, lowered IP settings to .200 and it worked
Title: Re: Help with Blade and Proxy Issues Post by: Swimmer63 on September 24, 2013, 05:41:23 AM try changing the blades IP to a lower number. that may not be in range set for your router. I had the same problem, lowered IP settings to .200 and it worked I bet you're right. Will try in the morning. Title: Re: Help with Blade and Proxy Issues Post by: HellDiverUK on September 24, 2013, 07:57:48 AM Why are all your chips X'ed out? ???
Title: Re: Help with Blade and Proxy Issues Post by: Swimmer63 on September 24, 2013, 06:22:58 PM It's working. Two problems. Power was not right for some reason. Not sure why.
And I did need to change the ip address. 249 was too high. Thanks for your help guys! |