|
Title: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on February 25, 2018, 07:18:35 AM This all aluminum open-air frame for the Octominer motherboard (https://octominer.com/shop/octominer_b8plus/) (riserless 8 GPU) is $95 USD, plus shipping.
Two standard ATX PSUs can be attached to the frame or a server style PSU (via two small angle brackets). https://www.spotswoodcomputercases.com/images/mining/Octominer/Frame%20w%20just%20fans.png* https://www.spotswoodcomputercases.com/images/mining/Octominer/Frame%20w%20just%20fans%20angle.png https://www.spotswoodcomputercases.com/images/mining/Octominer/Octominer%20w%20board%20angle.png Two standard ATX PSUs can be attached to the frame or server PSU (via two small angle brackets). https://www.spotswoodcomputercases.com/images/mining/Octominer/Octominer%20w%20rig.png https://www.spotswoodcomputercases.com/images/mining/Octominer/Attach%20Server%20PSU%20via%20angles.png Note that the two posts (near the tail-end of the GPUs) can be re-positioned further into the case for shorter GPUs or to mount fans over/above the GPUs. https://www.spotswoodcomputercases.com/images/mining/Octominer/Octominer%20w%20board%20and%20fans.png https://www.spotswoodcomputercases.com/images/mining/Octominer/Octominer%20w%20board%20and%20fans%20angle.png Dimensions: 27.8 x 14 x 10.4-inches (W x D x H) Ships as a kit. All required fasteners are included. PayPal only. Shipping from Washington state, USA. *Fans not included. Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: BitsPlz on February 25, 2018, 07:57:02 PM I'll take one. Where do I send the PayPal payment?
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on February 25, 2018, 10:05:33 PM I'll take one. Where do I send the PayPal payment? Great. I just need your zip/postal code and PayPal email address. PM sent.Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: lesuelrs on March 01, 2018, 11:15:45 AM What are the dimensions on this?
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on March 01, 2018, 03:36:54 PM What are the dimensions on this? 27.8 x 14 x 10.4-inches (W x D x H) Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: BenRickert on March 02, 2018, 03:04:38 AM I'll take one. Where do I send the PayPal payment? Great. I just need your zip/postal code and PayPal email address. PM sent.BR Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: ajlos on March 02, 2018, 06:52:14 PM Are these rdy to ship once order? Or is there a wait time?
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: BitsPlz on March 02, 2018, 07:48:03 PM Price drop? I paid $110 +tax and shipping on the 25th... Still going to ship this week?
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on March 02, 2018, 11:29:12 PM Are these rdy to ship once order? Or is there a wait time? Lead time for these is ~5 business days.Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on March 02, 2018, 11:30:50 PM Price drop? I paid $110 +tax and shipping on the 25th... Still going to ship this week? Yeah, I dropped the price because of basically zero interest in these. :(I sent all a refund for the price difference. -Rich Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: BenRickert on March 03, 2018, 01:11:00 PM Are these rdy to ship once order? Or is there a wait time? Lead time for these is ~5 business days.Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on March 03, 2018, 07:20:57 PM Are these rdy to ship once order? Or is there a wait time? Lead time for these is ~5 business days.Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Elder III on March 04, 2018, 01:13:26 AM Would it be possible to have a version of this that does not include the rails for mounting fans or the part for ATX PSUs? We will be using Server PSUs only with this motherboard since that's one of the biggest perks for the Octominer.
Here's a terrible MS Paint special to show what I was thinking of. I would still like to include 4 of the little tabs in order to connect 2 server PSUs sideways on the upright rails. --- If those changes were possible would there be a significant reduction in cost? https://i.imgur.com/QtPsId0.png Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: screasy on March 04, 2018, 01:19:44 AM Does the price include shipping?
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on March 04, 2018, 03:44:49 AM Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: BenRickert on March 04, 2018, 05:48:13 PM Are these rdy to ship once order? Or is there a wait time? Lead time for these is ~5 business days.Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: BitsPlz on March 06, 2018, 08:25:26 PM Got mine yesterday. Thank you! I didn't see assembly instructions on your site yet, are they still in the works?
Thanks! Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on March 06, 2018, 11:39:55 PM Got mine yesterday. Thank you! I didn't see assembly instructions on your site yet, are they still in the works? Yikes! No, manual just yet. Assembly is straight forward and a lot like every thing else I make...Thanks! - Bolt the posts to the three short beams via M3x20mm bolts and washers. - Bolt feet to the bottoms of two of the three sub-assemblies using M3x6mm bolts and hex nuts. - Bolt the long motherboard support beams to the three sub-assemblies via M3x35mm bolts, washers and hex nuts (the ones with the feet go on either side). The rest of the assembly is mostly covered by the current two PSU mining tray http://spotswoodcomputercases.com/wp/?page_id=9137 and the old/original tray: http://spotswoodcomputercases.com/wp/?page_id=9018 I should have this manual ready tomorrow night. I apologise for the inconvenience! Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: takagari on March 18, 2018, 09:14:59 PM Are these stackable? and price shipped to canada? USPS
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on March 19, 2018, 11:25:24 PM Are these stackable? and price shipped to canada? USPS They can be assembled in such a way that will make them stackable, just let me know when you place an order.In order to get an accurate quote I would need your postal code, but it seems everything I ship to CA is $45-55 USD. -Rich Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Mark Baum on March 20, 2018, 12:43:19 AM Hey Rich,
Frame just arrived. Looks great! Thanks. I'll get it set up in the morning and PSU's and MOBO. Then wait.......for GPU card prices to come back into the Earth's atmosphere....LOL. Rich has been great to deal with gang. If you're thinking about a riser less open air, go for it. It's a solid product and good support from the man himself. Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: ajlos on April 17, 2018, 04:50:26 PM Open air frame is working great. Rich is great to deal with so don't hesitate to buy. Currently, have 4 - 1080tis on it temp is around 54c with 3 - AC Infinity AXIAL 1238, Muffin Fan, 115V 120V AC 120mm x 38mm fans on the backside of vdcards.
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on April 17, 2018, 04:51:09 PM Done. ;D
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on April 17, 2018, 04:51:52 PM Open air frame is working great. Rich is great to deal with so don't hesitate to buy. Currently, have 4 - 1080tis on it temp is around 54c with 3 - AC Infinity AXIAL 1238, Muffin Fan, 115V 120V AC 120mm x 38mm fans on the backside of vdcards. Got pics?Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: ajlos on April 17, 2018, 05:57:37 PM Open air frame is working great. Rich is great to deal with so don't hesitate to buy. Currently, have 4 - 1080tis on it temp is around 54c with 3 - AC Infinity AXIAL 1238, Muffin Fan, 115V 120V AC 120mm x 38mm fans on the backside of vdcards. Got pics?I'll take some pics when I get home tonight. https://image.ibb.co/kDj7z7/F045_D450_4113_4035_835_B_84292_AFEF855.jpg https://image.ibb.co/k9AEe7/9_EF5_B40_A_BFE5_44_D2_84_E1_97_C75_F9104_AF.jpg https://image.ibb.co/i5wWRn/37_D064_D1_5417_459_C_9408_03536244_FF06.jpg Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: TMAN on April 20, 2018, 05:59:24 AM I like the look of these, sending you a PM now
Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on July 05, 2018, 06:55:05 AM bump
;D Title: Re: [FS] All aluminum open-air frame for Octominer motherboard (riserless 8 GPU) Post by: Spotswood on July 10, 2018, 11:34:27 PM A client wanted a frame for his Octominer motherboard below and a ming frame for his ATX rig up top:
http://www.spotswoodcomputercases.com/images/mining/Octominer/Octominer%20and%20stacked%20mining.png |
