Title: V2 asic blade's Backplanes Post by: mijanur on September 28, 2013, 07:25:21 PM V2 asic blade's Backplanes
The HP DPS 800GBA or ATSN 7001044-Y000 psu are too noisy, quite custom desktop PC PSU can be used but im wondering can the psu be connected to the backplane instead of individual blades? http://www.minersource.net/download/i/mark_dl/u/4012083278/4598616768/w797k.jpg where the psu plugs in if you look on left and right there is those inserts.. Left side is 12v+ and other is ground.. so does this mean you connect 12v+ wires on left and ground wire on the right side? Would a 1000watt quite pc psu be enough power to power all 10 blades? Title: Re: V2 asic blade's Backplanes Post by: xstr8guy on September 28, 2013, 11:49:12 PM I haven't seen any documentation regarding the side power connectors. I don't see why they wouldn't work well as long as get enough power to them. But I think you're on your own as far as determining the best way to rig them up.
I'm pretty sure that a 1000w PSU is quite adequate for the V2 blades since you can't overclock them. The HP DPS is only 800w and I'm running 8 blades with no issues. And I don't think it's too noisy either but I have it stashed in another room with other equipment running. |