|
Title: Antminer L3 all Hasboards on X Post by: Schindla1102 on March 02, 2018, 06:54:28 AM Hello Guys,
my Antminer L3+ stopped working yesterday at 5AM. He was running for more than 2 month without any issue. The thing is that he starts up, everything fine with no X an any hasboard but he has 0 Hashrate. After ~15 to 20 mins all Hasboard turn to X. I changed the pools, restarted, resetted and flashed the firmware again, nothing helps.... He is located on the attic with a current temperature of -7°C, can this be the problem? Pictures: https://imgur.com/a/nx0b3 Thanks in Advance Title: Re: Antminer L3 all Hasboards on X Post by: DaveF on March 02, 2018, 03:52:44 PM Can you put it in a warmer environment and let it warm up for an hour or two before turning it on?
Might be a bit too cold. From the bitmain website: Operating Temperature: 0C to 40C. Power supplies also don't like it that cold. Also, at that temperature condensation can be an issue. -Dave Title: Re: Antminer L3 all Hasboards on X Post by: drunkem1 on May 15, 2019, 12:38:45 AM Hey,
I have the "same" problem but with only one card it starts "no problem" but after 5min it appears "xxxxxxxxx .." Karlen log> https://imgur.com/a/0ZMqmZ0 https://imgur.com/a/GPJ0RSz https://imgur.com/a/VmDZlDF What would be the problem? board burned? |