Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: CryptoH on March 02, 2018, 08:44:29 AM



Title: Starting in the mining business
Post by: CryptoH on March 02, 2018, 08:44:29 AM
Hi guys,

I'm also venturing into the mining business. We're thinking of using the following combo: Nivdia p106-100 GPU's combined with AsRockH110.

Especially keen to understand the quality of the Nvidia cards.

Looking to mine ETH, ETC

Thanks!


Title: Re: Starting in the mining business
Post by: chandrarahmadewa on March 02, 2018, 09:14:40 AM
It is good that you decide to start mining,
type Nvidia p106-100 using CLAYMORE algorithm maybe you will get 20 MH/s - 24 MH/s for ethereum mining.
By the way with how many VGA you are mining?


Title: Re: Starting in the mining business
Post by: jillscarbrough on March 02, 2018, 09:15:35 AM
Hi guys,

I'm also venturing into the mining business. We're thinking of using the following combo: Nivdia p106-100 GPU's combined with AsRockH110.

Especially keen to understand the quality of the Nvidia cards.

Looking to mine ETH, ETC

Thanks!
the 106-100 almost same 1060 6GB, has a couple bit modification. better a mining on Zcash.most famous from NVIDIA is lower Power Consumption compare the AMD card.but for AMD more tweak-friendly


Title: Re: Starting in the mining business
Post by: Seraka on March 02, 2018, 09:42:12 AM
if you are looking to mine only  ETH, ETC, I'm not sure the P106 is the best option

I have one rig of it and not so powerfull on Ethash algoritm


Title: Re: Starting in the mining business
Post by: CryptoH on March 02, 2018, 09:50:04 AM
Hi Thanks for your reply,  we only have access this Nvidia P106 on the short term. I believe it's quite a good card isn't it.

if you are looking to mine only  ETH, ETC, I'm not sure the P106 is the best option

I have one rig of it and not so powerfull on Ethash algoritm


Title: Re: Starting in the mining business
Post by: CryptoH on March 02, 2018, 10:14:38 AM
Also what do you guys think is a fair price for A GPU, a see the market value is around 250 USD per card?


Title: Re: Starting in the mining business
Post by: ggbtctalk000 on March 02, 2018, 10:17:25 AM
if you are looking to mine only  ETH, ETC, I'm not sure the P106 is the best option

I have one rig of it and not so powerfull on Ethash algoritm

does anyone the sol/s rate on ewbf like zec? i was thinking about p106 but being cheaper it might be a weak card. I had 1080 which pulls about 400-450 Sol/s on low power mode.


Title: Re: Starting in the mining business
Post by: IonicTong on March 02, 2018, 10:18:53 AM
Also what do you guys think is a fair price for A GPU, a see the market value is around 250 USD per card?

Thats definitely a fair price, are you buying these at wholesale? We'd be lucky to get these around the $375 mark here. I have AMD and Nvidia cards. I prefer Nvidia as they give you much more flexibility and in my experience are easier to overclock on a spectrum of OS.


Title: Re: Starting in the mining business
Post by: CryptoH on March 02, 2018, 10:32:13 AM
Thanks for your reply, we're planning to put 288 in a rig.


It is good that you decide to start mining,
type Nvidia p106-100 using CLAYMORE algorithm maybe you will get 20 MH/s - 24 MH/s for ethereum mining.
By the way with how many VGA you are mining?


Title: Re: Starting in the mining business
Post by: chandrarahmadewa on March 02, 2018, 02:40:36 PM
Thanks for your reply, we're planning to put 288 in a rig.

288 VGA card, that's cool. I'm sure you're a millionaire because the price of 1 unit of VGA card is costly now in southeast Asia. I only have 15 VGA cards now.
I pray for your project success and smoothly later, good luck bro.


Title: Re: Starting in the mining business
Post by: 2stout on March 02, 2018, 03:14:07 PM
Just wondering about the Nvidia p106-100 resale value since it is mining specific where as something like the Nvidia 1080 ti has mining and gaming appeal, something to consider.


Title: Re: Starting in the mining business
Post by: Seraka on March 03, 2018, 11:40:19 AM
if you are looking to mine only  ETH, ETC, I'm not sure the P106 is the best option

I have one rig of it and not so powerfull on Ethash algoritm

does anyone the sol/s rate on ewbf like zec? i was thinking about p106 but being cheaper it might be a weak card. I had 1080 which pulls about 400-450 Sol/s on low power mode.

I get around 300 sols/s in Zcash, actually on Nanopool