Title: Antminer S7/9/L3+ - What size are the fan bolt threads ? Post by: Dragonizer on March 09, 2018, 07:36:16 PM Hi All
What size thread are the bolts holding Antminer S7/9/L3+ etc ?? I need longer ones to fit ducting outlets... Thanks I'm in the UK so it's all metric (mainly) Title: Re: Antminer S7/9/L3+ - What size are the fan bolt threads ? Post by: philipma1957 on March 10, 2018, 01:42:05 PM Come on guy's.....It's good to talk...lol It is a good question but I would need to look over my amazon orders as i have ordered some. give me a few min done here are 2 links 40mm should be too short m4 0.7 40mm https://www.amazon.com/gp/product/B00F32EDI0/ref=oh_aui_detailpage_o06_s00? m4 0.7 50mm https://www.amazon.com/uxcell-M4x50mm-Stainless-Phillips-Machine/dp/B019ZEHTPU/ref=sr_1_1? I would think you want the 50mm Title: Re: Antminer S7/9/L3+ - What size are the fan bolt threads ? Post by: Dragonizer on March 10, 2018, 02:10:50 PM Come on guy's.....It's good to talk...lol It is a good question but I would need to look over my amazon orders as i have ordered some. give me a few min done here are 2 links 40mm should be too short m4 0.7 40mm https://www.amazon.com/gp/product/B00F32EDI0/ref=oh_aui_detailpage_o06_s00? m4 0.7 50mm https://www.amazon.com/uxcell-M4x50mm-Stainless-Phillips-Machine/dp/B019ZEHTPU/ref=sr_1_1? I would think you want the 50mm Thanks....M4 Much appreciated.. Title: Re: Antminer S7/9/L3+ - What size are the fan bolt threads ? Post by: HagssFIN on March 10, 2018, 02:52:52 PM Sorry, I didn't notice this earlier.
But for finding out bolt size measurements (for example), there is a good tool for it. A caliper. ;) https://upload.wikimedia.org/wikipedia/commons/thumb/f/f2/DigitalCaliperEuro.jpg/300px-DigitalCaliperEuro.jpg |