Title: Power supply needed Post by: Maldark on October 26, 2013, 12:05:20 AM Hi there
I'm not quite sure if this is where the thread is supposed to be posted, but it's the only section that seemed right. How big a power supply would it take to use 2x Gigabyte 7950 WF3? From what I can read I wouldn't need much more than 500-600watt? The Bronze/Silver/Gold/Platinum doesn't matter as I've got free power. Thank you for your time : ) Title: Re: Power supply needed Post by: Littleshop on October 26, 2013, 12:08:29 AM Hi there I'm not quite sure if this is where the thread is supposed to be posted, but it's the only section that seemed right. How big a power supply would it take to use 2x Gigabyte 7950 WF3? From what I can read I wouldn't need much more than 500-600watt? The Bronze/Silver/Gold/Platinum doesn't matter as I've got free power. Thank you for your time : ) 600W or more. And it needs to be a high quality power supply, those generic 600W units will pop in months under a heavy load. Power supply efficiency does not matter as much to you as others (because the free power) but better supplies make less heat. In the summer that could be important allowing you to run more units. Title: Re: Power supply needed Post by: Maldark on October 26, 2013, 12:15:19 AM Hi there I'm not quite sure if this is where the thread is supposed to be posted, but it's the only section that seemed right. How big a power supply would it take to use 2x Gigabyte 7950 WF3? From what I can read I wouldn't need much more than 500-600watt? The Bronze/Silver/Gold/Platinum doesn't matter as I've got free power. Thank you for your time : ) 600W or more. And it needs to be a high quality power supply, those generic 600W units will pop in months under a heavy load. Power supply efficiency does not matter as much to you as others (because the free power) but better supplies make less heat. In the summer that could be important allowing you to run more units. Thank you for your time : ) Got any specific in mind that you could recommend around the 600-700 range? Also, if they do pop and they are under warranty, that shouldn't be much of a problem then right? Besides the obvious downtime Title: Re: Power supply needed Post by: Littleshop on October 26, 2013, 12:40:50 AM Hi there I'm not quite sure if this is where the thread is supposed to be posted, but it's the only section that seemed right. How big a power supply would it take to use 2x Gigabyte 7950 WF3? From what I can read I wouldn't need much more than 500-600watt? The Bronze/Silver/Gold/Platinum doesn't matter as I've got free power. Thank you for your time : ) 600W or more. And it needs to be a high quality power supply, those generic 600W units will pop in months under a heavy load. Power supply efficiency does not matter as much to you as others (because the free power) but better supplies make less heat. In the summer that could be important allowing you to run more units. Thank you for your time : ) Got any specific in mind that you could recommend around the 600-700 range? Also, if they do pop and they are under warranty, that shouldn't be much of a problem then right? Besides the obvious downtime Sometimes bad supplies take other hardware with them to the grave so really avoid 'generic' power supplies. http://www.hardocp.com/reviews/psu_power_supplies/ I personnally like Antec, Seasonic, XFX, Corsair, Enermax, OCZ & Thermaltake. Title: Re: Power supply needed Post by: zackclark70 on October 26, 2013, 12:43:22 AM something like a hx750 will work well and you can get them cheap :)
Title: Re: Power supply needed Post by: miner49er on October 26, 2013, 01:42:03 AM my XFX7950 X2 are running off of 850w
my Powercolor 7950 X2 running on 650w the 850 powering my main rig, so all the bells and whistles the 650 w is barebones miner, NO extras- HDD, sytem board and 2 vid cards + asics(self powered) minimum 550 for 1 card Title: Re: Power supply needed Post by: sidehack on October 26, 2013, 01:48:47 AM I used an old server supply rewired slightly to provide an extra 40A 12V rail in my GPU rig. If you can find a second-hand fairly cheap that might be something to consider.
Title: Re: Power supply needed Post by: balanghai on October 26, 2013, 01:54:39 AM 750w Gold is recommended. Also try to add a good servo motor voltage regulator as it extends the life of the capacitors and transistors of the power supply.
Title: Re: Power supply needed Post by: frojoe on October 26, 2013, 02:04:04 AM You looking to purchase one for btc?
Title: Re: Power supply needed Post by: waltermot321 on October 26, 2013, 03:35:42 AM Hi there I'm not quite sure if this is where the thread is supposed to be posted, but it's the only section that seemed right. How big a power supply would it take to use 2x Gigabyte 7950 WF3? From what I can read I wouldn't need much more than 500-600watt? The Bronze/Silver/Gold/Platinum doesn't matter as I've got free power. Thank you for your time : ) 600 watts platinum should be enough, it also depends on how much you are going to overclock.. Title: Re: Power supply needed Post by: Maldark on October 26, 2013, 11:44:49 AM Thank you all for your replies, I am thinking of going with either the Corsair CX750M or the "XFX ProSeries P1-750X-XXB9", both have a good reputation and are both 750Watt power supplies
Title: Re: Power supply needed Post by: Littleshop on October 26, 2013, 02:54:33 PM I used an old server supply rewired slightly to provide an extra 40A 12V rail in my GPU rig. If you can find a second-hand fairly cheap that might be something to consider. I have a few of these for $15 plus ship worth of BTC. 16a 12v Title: Re: Power supply needed Post by: philipma1957 on October 27, 2013, 11:44:18 PM Thank you all for your replies, I am thinking of going with either the Corsair CX750M or the "XFX ProSeries P1-750X-XXB9", both have a good reputation and are both 750Watt power supplies I have a new in box seasonic platinum top of the line psu http://www.newegg.com/Product/Product.aspx?Item=N82E16817151120 if you are usa based I can give a good deal . way under the price above. Title: Re: Power supply needed Post by: hulk on October 28, 2013, 02:00:43 AM Hi there I'm not quite sure if this is where the thread is supposed to be posted, but it's the only section that seemed right. How big a power supply would it take to use 2x Gigabyte 7950 WF3? From what I can read I wouldn't need much more than 500-600watt? The Bronze/Silver/Gold/Platinum doesn't matter as I've got free power. Thank you for your time : ) Since you are getting gigabyte, do you know that it is unable to undervolt? So you might need about 800 watt if you are planing to overclock and not undervolt... |