|
Title: Avalon Controler No devices Post by: TopKiller on March 27, 2018, 05:23:08 PM Hi,
I bought avalon controler + psu + 1 avalon miner 821. I’m having a problom because under CgMiner status, in Avalon Devices i dont have my avalon 821 The avalon miner have white led and the converter have green and blue lights Whats the problem? Tanks, TopKiller Title: Re: Avalon Controler No devices Post by: sarcheer on March 27, 2018, 10:15:26 PM I tried using my old controller with my Avalon 821's but had the same problem as you! I discovered that you need to upgrade the controller firmware to the newest version that supports the 8's.
Hope this works for you! Title: Re: Avalon Controler No devices Post by: HagssFIN on March 27, 2018, 10:21:59 PM OP, have you tried to do a fresh install for the controller OpenWrt firmware?
You can see instructions how to do it in a guide I've made --> https://bitcointalk.org/index.php?topic=2937129 Title: Re: Avalon Controler No devices Post by: TopKiller on March 28, 2018, 11:27:00 AM Hi already installed the new firmwares and MM
Firmware: https://canaan.io/downloads/software/avalon821/openwrt/20180305/rpi3-modelb/ MM: https://canaan.io/downloads/software/avalon821/mm/2018-03-06/ Btw I tryed to use your toturial to solve the problem :D Title: Re: Avalon Controler No devices Post by: TopKiller on March 28, 2018, 11:34:11 AM I tried using my old controller with my Avalon 821's but had the same problem as you! I discovered that you need to upgrade the controller firmware to the newest version that supports the 8's. Hope this works for you! Edit: I already did that, in my controler dashboard it says that i have the 20180305 version witch is the latest Title: Re: Avalon Controler No devices Post by: Steamtyme on March 28, 2018, 02:32:00 PM It may be your AUC3 converter, between the controller and the miner. Do you have a spare one by chance? If you do try swapping it out.
I know in the past a few have gone out that weren't flashed for operation. What do the lights look like on the miner and on the AUC3 converter? Title: Re: Avalon Controler No devices Post by: TopKiller on March 28, 2018, 03:45:25 PM It may be your AUC3 converter, between the controller and the miner. Do you have a spare one by chance? If you do try swapping it out. I know in the past a few have gone out that weren't flashed for operation. What do the lights look like on the miner and on the AUC3 converter? Hi I dont have a spare auc3 converter. The leds are white in the miner and blue + green in auc converter Tanks Topkiller Title: Re: Avalon Controler No devices Post by: HagssFIN on March 28, 2018, 04:06:26 PM There has been some issues with the AUC3 Converters with no firmware installed.
Maybe your AUC3 Converter is an unflashed one? Title: Re: Avalon Controler No devices Post by: Steamtyme on March 28, 2018, 04:13:41 PM Hi I dont have a spare auc3 converter. The leds are white in the miner and blue + green in auc converter Tanks Topkiller Where did you buy the miner? I can't remember if the Converters lights show normal (which is what you described) when it isn't flashed? I would then guess that it is either your converter or the cable to the miner. I don't know for sure that it matters, but if you are looking at the back did you plug the cable into the port on the left side? Also just make sure the cable is in all the way. I remember that being the suggested way to do it and to use the right side port for daisy chaining multiple miners. You might have to reach out to the Distributor you purchased from for a converter or cable. Maybe a support ticket with Canaan as well. Title: Re: Avalon Controler No devices Post by: TopKiller on March 28, 2018, 04:26:21 PM Hi.
I have plugged the auc3 cable to the left side I will talk to cryptouniverse(where i buy the miner) to give me one new conversor Tanks. Topkiller Title: Re: Avalon Controler No devices Post by: mgoz on April 02, 2018, 04:30:15 PM I had an 821 that did the same thing. AUC3 lit blue and miner would light white and then stay yellow in idle status. It was a bad AUC cable. I didn't see anything wrong with it or the pin outs and even tried re-pinning, but no luck. Moving the cable around, sometimes the AUC3 would flicker red. Only replacement cable fixed it. Cable wire colors were slightly different than replacement and what I received with 841. Main LED on AUC3 should be lit green when it's properly communicating with controller. Blue only means the AUC3 is initialized, but won't show up in cgminer or detect any miners.
Title: Re: Avalon Controler No devices Post by: HagssFIN on April 02, 2018, 04:38:07 PM ^ That is a good point. It is always a good idea to check the cable conditions before moving on with the troubleshooting to PCB boards.
Title: Re: Avalon Controler No devices Post by: philipma1957 on April 02, 2018, 04:48:32 PM cable link
https://www.amazon.com/uxcell-2-54mm-Pitch-Female-Adapter/dp/B00W948IDG/ref=sr_1_3? |