|
Title: Need Help Post by: Nabucodonossor on March 27, 2018, 11:08:03 PM Hello!
I would greatly appreciate your help! I have just assembled a mining rig with these specs: H110 Pro BTC + 2× PSU Bequiet! Dark power Pro 1200W ,connected between them with Add2Psu 6× Nvidia Aorus 1080Ti Extreme Intel Core i3 -7100 CPU 16 GB RAM Windows 10 Home with the latest upgrades The first problem that i've met was that the computer was not booting up with any of the gpu connected to the pci1( x16), so i decided to start from the second pci. With them connected in these manner and following the instructions of the motherboard , i've installed them all, but now every time, i start mining the sistem freezes or crashes. Sometimes it takes 5 minutes and never stays online more than 2 hours. Thank you a lot , comunity! Title: Re: Need Help Post by: Bitfort on March 27, 2018, 11:30:19 PM To get better support move this topic to proper section ... Mining (Altcoins) (https://bitcointalk.org/index.php?board=160.0) is the correct one.
(move it using link at bottom left) Title: Re: Need Help Post by: dexone on March 28, 2018, 04:25:21 AM You can plug in 1 graphic card to boot up and do all the configurations then add more cards 1 by 1
Title: Re: Need Help Post by: fernandoaleixo on March 28, 2018, 05:36:37 AM 6 GPU, wow... Are you sure everything is correctly installed? With 16GB RAM it shouldn't take that much of the OS.
Title: Re: Need Help Post by: littlehobo on March 28, 2018, 07:57:49 AM Did you go into the bios on the Motherboard and change it so it accepts the PCEI 1 slots and more that 2 GPU.
When I first started I could not understand why it was only accepting the PCEI 16 ones. make sure you have above 4g decoding on, and try the Gen 1.2 settings ( google them for your Motherboard and there should be a guide for them. Title: Re: Need Help Post by: edwardceng on March 28, 2018, 11:39:52 AM have you tried increasing virtual memory at least to 16GB, more will be better?.
how about Riser powering schema? Title: Re: Need Help Post by: Nabucodonossor on March 29, 2018, 09:24:17 AM You can plug in 1 graphic card to boot up and do all the configurations then add more cards 1 by 1 This is the problem, if I boot up with one card , in the pcie1 ( the only 16 pin pcie on the motherboard , and as intruction on the motherboard says , the first one that i have to install) the computer wil start , the fans also but i have a black screen. And this happens only when i have a card plugged in this pcie1. |