Bitcoin Forum

Other => Beginners & Help => Topic started by: SirDrSpiderpig on November 14, 2013, 06:51:10 PM



Title: Reject rate > 1%
Post by: SirDrSpiderpig on November 14, 2013, 06:51:10 PM
Can someone tell what would cause reject rate to be over 1%?  The last couple of days, the reject rate has been usually around 0.15% or less.  But today it's just a little over 1%.  Is it something I should worry about?


Title: Re: Reject rate > 1%
Post by: icem3lter on November 14, 2013, 07:31:19 PM
Can someone tell what would cause reject rate to be over 1%?  The last couple of days, the reject rate has been usually around 0.15% or less.  But today it's just a little over 1%.  Is it something I should worry about?


GPU or some ASIC ?

It might be worse heat dissipation (higher room temp, bad fan)
or some glitch in KNC miner for example and you have to reset


Title: Re: Reject rate > 1%
Post by: Gabi on November 14, 2013, 07:35:40 PM
Given the info you wrote, it can be about everything. More than 1$ of girls are rejecting your date attempt?  :D


Title: Re: Reject rate > 1%
Post by: SirDrSpiderpig on November 14, 2013, 07:38:34 PM
Can someone tell what would cause reject rate to be over 1%?  The last couple of days, the reject rate has been usually around 0.15% or less.  But today it's just a little over 1%.  Is it something I should worry about?


GPU or some ASIC ?

It might be worse heat dissipation (higher room temp, bad fan)
or some glitch in KNC miner for example and you have to reset

Currently I have 45 ASIC USB miners attached.  I have a pretty big fan on all the units keeping them cool.

I did get a 20 port hub recently so I'll move some to it and I also got about 4 usb fans to try to keep things cooler.

Thanks for the information guys.


Title: Re: Reject rate > 1%
Post by: Gabi on November 14, 2013, 07:40:14 PM
Either a overheat problem or not enough power


Title: Re: Reject rate > 1%
Post by: SirDrSpiderpig on November 14, 2013, 07:57:17 PM
I have three anker 10 port USB 3.0 hubs.  The rest are on roswill hubs and a d-link one.  Those hubs are half the ports used since power is less.  Hopefully with the 20 port hub arriving today I'll re-organize the rig and move it to the basement utility closet where it cooler and the internet comes into the house.