Bitcoin Forum

In our final run of Chili boards we had some excess stock of PCBs, so we teamed up with CanaryInTheMine to provide the BFL ASICs needed to finish those boards with the intent to auction them off.
See the Chili thread itself (https://bitcointalk.org/index.php?topic=304250.0) for more details on the boards.
We now have 17 boards that will be sold.


http://i42.tinypic.com/54he2t.pnghttp://i41.tinypic.com/25zm7ft.jpg
(Images from Batch 1, but are representative)

Nominally 30GH/s, most users are reporting in the vicinity of 35GH/s with their units if properly cooled.
http://i40.tinypic.com/25z4kqp.png

Bidding Format
Minimum Bid is 0.5BTC
Place bids in the format Number@Price (IE, 3 units @ 2.0BTC)

End Time
This auction ends Monday Nov 18th, 2013 at 23:59 (11:59 pm) GMT, 18:59 EST, 15:59 PST
http://www.pending.me.uk/cd/bla_1384819199.png

Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.

I'll start us off!

17 @ 0.5BTC

17@0.6 BTC

do these come with the nice heatsink and fan?

1@0.7

No, that's part of our test and verification setup.

Do you recommend that setup and provide the part/vendor of the fan itself?

4@0.7

1@0.7

I probably wouldn't recommend it. The testing heatsinks (Arctic Cooling Mono Plus) were primarily chosen because they're very easy to get on and off, they're actually a little expensive for the performance you get, especially since you can get the bigger Arctic Cooling Twin Turbo II for the same price is you want a GPU heatsink.

I've posted it a couple times in the Chili thread, but it's extremely hard to beat the value of the clearance Antec Kuhler Shelf (http://store.antec.com/Catalog/ProductDetails.aspx?ProductPath=kuhler-shelf/0-761345-77081-1)
My cooling setup uses two of them (one as a backplate/VRM fan) cost a hair over $25, and it works stellar. The bottom one keeps the ASICs pressed nice and tight against the actual heatsink, and makes a great stand to hold the board up.
http://i40.tinypic.com/vrezcx.jpg

1@0.7

17 @1

2@0.7

For clearance: There comes without the asics?

that's what they are, yes. 

is "bobsag" a shill bidder?  that can't be for real, right?

i'll offer the lowest of USD $400 or 1 bitcoin for two of them, based on the price of BTC when auction ends on Monday

No, there boards are fully populated and come with the ASICs. Place a heatsink and plug them in, and they're ready to go.

No, from what I know, he runs hosting and quite a few group buys.  It's a legit bid AFAIK.

12 @ 1.01

If you have a problem with me, at least read the dam OP before you start shooting your mouth off.

2 @ 1.01

1@1.01

1 @ 1.01

2 @ 1.02

4 @1.01

Current High Bidders
infamousdutch: 2@1.02
bruiser: 12@1.01
Fireblade: 2@1.01
MarkE08: 1@1.01

tyler26 and wirabhumi, all 17 were bid on at 1.01 before your bids, so you're not currently active.

I'll rise it, bro..

5 @ 1.02

1 @ 1.03

1 @ 1.02

1 @ 1.02 (raised)

1 @1.03

make that 2 @ 1.03

1 @ 1.03

Mr teal how many Asic chips are there on the board

Mr Teal, can you show who is in the lead with bidding?

Hi guyver. The board comes with 8 ASICs mounted.

thanks for the reply how much would shipping to the uk be

For 1, $95. Less per unit with more, it would be ~$130 for 4.

nuffsaid420: 1@1.03
markj113: 2@1.03
tyler26: 1@1.03
infamousdutch: 2@1.02
wirabhumi: 5@1.02
ipextreme: 1@1.02
markE08: 1@1.02
bruiser: 4@1.01

1@ 1.03

1@1.03

4 @ 1.04

1 @ 1.04 (REVISED)

4 @ 1.06

1 @ 1.06

1 @ 1.06

Auction ends in a hair over 6 hours.

Updating my bid to 1@1.06

hey, I bidded for 4.

1 @ 1.04

     1@1.07

1 @ 1.07

1@1.08 (raised bid)

1 @ 1.04 (revised, please PM me if outbid)

1@1.05

1 @ 1.06

raise 1 @ 1.08

If you want to auction off items, you should go to this new site. It looks very promising and I think it could be a great tool for Cryptocurrencies in general.

https://cryptohashauctions.info

You can auction anything from miners, to coins, to mining contracts (hash rates).

It is a very new site and it needs more exposure. Any listings would help.

3 @ 1.25

1@1.08 revised bid

4 x 1.08 (raise)

MrTeal, what does it look like in standings?

THANK YOU for posting this. I have been working on boosting Jalapenos with extra chips and cooling on the board; I found that running a copper heat sink on the bottom of the board provides as much cooling power as the stupid AL one plus fan does on top.

Currently I am running 5 chips, 65c temps, thinking about going for 6. The JP's 1 volt supply is only rated for 80amps or so and I think if I go over 6 we will be screwed. How big/high power is the DC-DC 1 volt converter on your device? Did you need to go over 100a?

Thank you again. Here's a pic of my latest.. project (20gh)

http://farm8.staticflickr.com/7388/10896289946_c0c88789b8_z.jpg

I'll order one of those heat sinks for a better top one. Then I can go to 7 if I can backfeed the 1 volt supply/based on your thoughts.

Chris

2 @ 1.08

1 @ 1.09

Raise my bid to 1.09

1 @ 1.09

Can you post the current high bidders? I'm not sure if I am one of them.

Cancel My Bid. Sorry

Thanks for the auction. Where would you like us to send payment and shipping info?

I'll PM the bidders once it's over.

Thanks, it ended a couple of minutes ago correct?

Ok, which one of you bought up all the Antec Kuhler Shelf's?  LOL.

I've got 4 here sitting and waiting for more chilis... after this auction I just need to scrounge up 1 more.

Waiting on a PM MrTeal

Hi Mark,
I sent one an hour and a half ago. Can you check your inbox?

Thanks.

I think they should all be out now.

So if there are any drop outs am I next in line?

Sorry, couldn't make it. I'll have to give up my 4.

I would be interested in 1-2 if anyone further drops out.

Interested in 1 @ 1.04 if any fall out. Shipping to Netherlands.

When will these be shipped?

For those that paid, they shipped today.

Great to hear.

When's the deadline for payment, in case others want a chance?

Got my tracking number :)

Same question for me

Still after the 2 miners @1.03 - believe I was next in line  ;)

Sorry guys, we're not going to move down the line. They are just going to be relisted with the auction ending Thursday night, and shipping Friday.
Same conditions as this one, though I'd ask if you want to pay with Paypal or don't actually have any BTC and are trying to arraign a loan to buy them, don't bid until you have BTC.

https://bitcointalk.org/index.php?topic=340704.0

Thanks

Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.

[/quote]

Looks like it got shipped today instead of the 19th. Darn, 1 less day of mining...

Looks like it got shipped today instead of the 19th. Darn, 1 less day of mining...
[/quote]
No, they got dropped off at USPS yesterday before 6pm CST. I'm not sure why they didn't scan until today.

No, they got dropped off at USPS yesterday before 6pm CST. I'm not sure why they didn't scan until today.
[/quote]

Thx MrTeal. Govmnt has its hands all over our bitcoin resources.

The amount of failure at the USPS knows no bounds. I had to call in yesterday again and wait on hold for an hour for the second time in a week in order to get a hold on the account cleared. We had some labels that were created mid-October that ended up not getting used and we canceled and refunded, but apparently they reuse labels and a couple of those numbers got used to send packages (from California) to China. Even if I called in, every time the package was scanned again I'd get an email telling me my account was locked and I owed them money. They couldn't stop it from happening, they could just clear it temporarily until the next time it scans. Their response was basically "Sorry about this, it happens. Just call in again next time and we'll clear it again."

you have mail from fabio from italy
thank you guys