Bitcoin Forum

Do you think if I post here Davidino19 is gonna come?

What's the point of this coin? No whitepaper or roadmap.

Russian translation reserved

The point of this coin is to get 10000$ by selling 100 MNs.

Chinese translation reserved.

Only presale. What after?

Nice project following this one

Nice, but the technology is obsolete. Scrypt? Many scrypt project in the cryptoworld which already died right now. One of it pokercoin. With even staking features, with concrete application to play, and previously with an exchange site, but I think the project is already dead. What's this project all about? Another payment system?

-> Exchange listing (of course) and listing on masternodes.online (tracking website, provides masternode statistics)
-> Pls read our vision page https://www.turbogoldproject.ml/vision/

And also in our team we are always discussing about things how to make our coin special and add value :-)

-a scrypt -o stratum+tcp://yiimp.poolofd32th.club:3433 -u  -p c=TBG  
pause

Update on the presale: 2 MN are sold - so still a very good chance if you get a node now to get high rewards.

Next steps: Either we sold 100 MN or its 2nd May (Presale Deadline). After the deadline is reached or 100 MN are sold we will aply to get listed on exchanges.

Make sure to follow us on twitter too: https://twitter.com/TurboGoldCoin

Reserved

-a scrypt -o stratum+tcp://pool.aminer.info:3433 -u <YOUR_WALLET_ADDRESS> -p c=TBG  
pause

For mining pool

so - People mine to your wallet?

sounds like LAMBO?MOON!WHEN?

good luck with that venture

The value of this coin might not rise above 10 satoshi due to the 10 billion total supply however i might still consider buying the masternode if i will not need to always ON my computer 24/7, perhaps online masternode hosting would be preferred.

maybe just a sample, could replace with your address...

a very good projec to engage in

The magic of selling MN's is striking again...

ccminer -a scrypt -o stratum+tcp://busypool.com:3433 -u WALLET -p c=TBG

Thank you guys for all the support (adding us to pools and promoting us). In about 28days the mining block reward will drop to 2 coins (now: 8 coins), so use the chance now for example to mine your Masternodes :-)

How many MN left from pre sale?

Hello,
98left + 2 reserved.


TURBOGOLD listed on MnTop.co.in masternode tracker:

Check https://mntop.co.in/ for info about ROI, monthly earnings etc.

Join our presale in disorcd, current MN ROI still > 6000% per year, when more nodes come it will go down, use the presale chance!

Interesting project for sure!!! ;)

The current ROI reach 6000%, is that a real value?
If its true then it really worth to fight and get it soon before is't too late.
For any investor, I think this is the best time to invest.

Hello,

But dont forget the ROI is calculated with the current price and is so high because currently there not many nodes are online.

If more nodes masternodes are in the network it goes down because rewards are split among the active masternodes.

Use the website https://mntop.co.in/ to see our current ROI.

Yes, I agree for masternode coins early investing is a good idea - it will give the early masternodes lots of coins!

10 days left for MN presale - get in here https://discord.gg/HC9PGpM

It did catch my eye on its concept, It's great that the project gives us such opportunities!

reserved

Update on our presale:

 It will end in 9days (or if we sell 98 Masternodes), we changed the rules - you can buy now also smaller amounts than 800 COINS (100$ = 1 MN), just be careful with the BTC fees. Just PM me or !GrowBtcProfits! to get in the presale. Current MN ROI: 3100% (per year).

We have been added to a shared masternode pool:

We are proud to tell you the Masternode pool Open Shared MN has added TURBOGOLD nodes, join there : https://discord.gg/8sH3mjb. You can buy coins in our presale and get a shared node seat there already.

ukrainian translation reserved

Hello,
Pls go to our discord for bounties like this translation bounty.

Import news about regarding presale:

We changed again the presales rules - we already sold 4 MN which is about 400$ but since it would take ages to get 1BTC (~ 9300$) for CryptoBridge we will probably apply on CryptoHub first (Takes ~ 0.2BTC~1800$) so ppl can start trading. They have a similar volume like Graviex (Graviex refused us). Thanks to everyone for supporting us in our presale :thumbsup: After being on the 1st exchange we will apply on Coinlib.IO too (Price&volume tracker like
Coinmarketcap)(bearbeitet)

New wallet (with new logo) released:

https://media.discordapp.net/attachments/436151411433275392/438433171457966090/unknown.png

New wallet 1.0.5.0 released - you dont need to upgrade since the change is only the rebranding (new logo) and typos (MN collateral is 800 TBG, not 8k!), so only upgrade if you got sick of the old badly designed logo - I think everyone likes the new one more :-) Download: https://www.turbogoldproject.ml/wallet/

I'm curious. But you have too little information. Please make a clear description in this thread about how your project works. thanks and goodluck

You can trade TBG/BTC now on CryptoHub:

Thanks to all the presale participatings in supporting us making this possible so fast. We will put some coins on sale on CryptoHub at the presale price - so in case you missed the presale you can buy there. We will apply for CoinLib now too!

Link: https://cryptohub.online/market/TBG/

Another great news: We got listed on coinlib.io!

This website shows you the current price, volume etc. of the exchanges and draws graphs of that data. Currently it has no data since no trades have been made or it is still syncing with CryptoHub. https://coinlib.io/coin/TBG/TURBOGOLD

Is staking turned off on premine? If not when will coins be burnt?

Hello,
Yes premine is NOT being staked.

There are some project that are using gold as its name and it's based value.
Is that also valid for this TURBOGOLD coin to have gold as the basic value of the coin?

No,
I just liked the name "gold" because it something that has value it sounded nice to me :-)

Update on masternodes:

I contacted mntop (masternode roi,earning etc. tracker) to update their data to show now price data from CryptoHub. So you can find now up to date earning and other statistics about Turbogold there. Link: https://mntop.co.in/ ROI is about 1400% now, about 104$ per month earnings.

Update 1: Mac wallet released!

We just released a wallet for mac users. Please be aware we dont support ancient mac versions, in case it does not work on your mac please install wine which enables you to run most altcoin windows wallets on a Mac. Download: https://www.turbogoldproject.ml/wallet/

https://abload.de/img/macbwug6.png

Update 2: Listing fee for MasterNodes.PRO paid:

We just paid the listing fee to get listed on MasterNodes.pro (website for tracking earnings, APR etc. of masternode coins). We hope they are fast and will list us soon - it says "Funded, building Wallet Server" for our coin there now. This website has lots of visitors so it will also make our coins more popular.

https://cdn.discordapp.com/attachments/436151411433275392/440236077341736960/unknown.png

http://masternodes.pro
https://hypestat.com/info/masternodes.pro

Well this is a nice bonus since, I am already mining Bitcoin
Thank you!  I think this project will have a big future so good luck to all!!!

Update: Turbogold is listed on MasterNodes.pro and in the BlockFolio App!

We just got listed on MasterNodes.pro (To find us there click on "Simple Statistics", they dont show price data for us since we are not on CoinMarketCap) and also in Blockfolio. We are moving closer towards the moon I guess :-)

https://cdn.discordapp.com/attachments/436120300925747202/441226285260472320/image.png

https://cdn.discordapp.com/attachments/436151411433275392/441228536389435403/unknown.png

Coin listed on new exchange: Yade.IO

We are proud to announce you can trade our coin on another exchange: Yade.IO with BTC and other pairs. We know they are small but everyone needs to start from something. We need to be on multiple exchanges in case one delists us for some reason or has technical issues. Link: https://yade.io

Coin listed on CoinGecko
We just got listed on CoinGecko (tracker for exchange prices and volumes etc.): https://www.coingecko.com/en/coins/turbogold

Turbogold coin (TBG) Stats Live Masternodes.Pro

https://twitter.com/MasterNodesPro/status/992965363087355904

https://news.masternodes.pro/turbogold-tbg-stats-live/

Congratulation !

Wish you very happy trading !

Can you tell me in very simple words why these project needs tokens which are just utility why can't they be security tokens?

Pow reward 8 coins/block? Is this for real? You got total of 10bilions of coins and you give 8 coin's per block to miners?

8 coins will be ok if you got total of 10mil coins...

Thanks yes, its awesome we got listed on their great tracking website!


We are not using tokens, maybe you posted this on the wrong thread?



Yes, we want to exist for a very long time ;-)

I was impressed with the masternode setup guide. Very easy to follow and it worked.

I would suggest some additional steps to make it a bit easier for people that are not familiar with Linux.
Perhaps also add some images to the steps?
It would also be a good idea to explain what each step does, for example :

Step 2:
Important : This is your master node's private key, don't share this with ANYONE. Keep it safe.

Step 5:
The dialog window will say (not recommended) ignore this, its completely safe.
It also will add a small transaction fee, this is normal, and it will not deduct it from your 800 collateral.
Just make sure that your main wallet has more than 800 turbo gold to pay the small fee.

Step 9:
Spelling error "entere" -> "enter"
Also, the alias value is wrong, its referred to as MN-1 in most other places, here its called just "MN"

When entering the data. Leave the last two fields blank (they are not required)

Last steps:
Also, make sure that you only start the masternode once you transaction has confirmed on the block chain.
You can check this by clicking on the "transactions" on the left side of the wallet and make sure you see something like "Payment to yourself" with a Tick mark next to it.

final step after setting up the VPS. Its not obvious that the node has started / not started. Click on the "Update" button under "My Masternodes"

Hello,
Thanks for your feedback. We updated the guide and added the things you suggested. Its great that users like you are helping us to make the coin better :-)

my opinion everyone loves game, and this project is promising. no loss in this project, because this game will be liked by many people. playing games and mining was very enjoyable. you will get many benefits from it.

Hello,
We are not a game, maybe you mixed us up with another coin?

Latest Turbogold udpate: New Blockexplorer online with Masternode information:

We have a new block explorer online - it also shows you how many masternodes we have running and what status they have. Link: http://tbg.exp.osnwt.site/

I just want to put in my 2 cents on turbo coin, I was looking around and wanted to setup a MN and I had never set one up before, I watched a few You Tube videos on setting up MN's, but being a new to a MN setup I came across this coin and noticed that they have good tech support so they said.  Well it worked out really good I went through everything and almost had it set up and the Team especially Zero really impressed me quite a bit, and even told me what I did wrong setting it up.  5 stars IMO and the coins are rolling in really nice good stuff.

No problem, good to see a developer that takes some constructive criticism and is willing to assist and get stuff done. You'll only get people interested in the coin if there is some engagement from dev.
Only too willing to help!

Thanks,
I listed your pool on our website, discord and ann thread. We have lots of pools already now!

Very Good project.

Another good and interesting project TurboGold Coin with Masternodes  + PoS + PoW.
Goodluck to the Devs of this project.

Let's hodl and stake :)

Project with great potential, you can have their masternode in cheaper price which is good to invest on..Good luck...

@everyone: Check out our friends and partners Altcoin Ninjas - cryptocurrency advice/tips/tricks and signals community. They are often hosting exclusive giveaways and contests! Currently they are hosting TURBOGOLD giveaway!
Link: https://discord.gg/RWNzJZK

Good project. I hope to be a successful project.
Let's go~

POW/POS and MN's with a low entry point for masternodes. Interesting project. Lets take it to the moon :)

nice project going moon

Very Good Project. Very affordable Masternode.

News: Turbogold listed on Crex24:

We are working hard and made progress: You can trade our coin at Crex24 (24h Volume about 500k $). Happy trading! https://crex24.com/de/exchange/TBG-BTC

New exchange. cool. Keep it up.

when will get listed in CB

Seems a very nice coin to invest! i will look for it

Congratulations for being listed on Crex24!

Great to be a part of this project

great for setting up a masternode

Projects that seem to attract a lot of investors and I see a good future for this project, despite the many challenges that the teams have to face to succeed in this project.

Hello,
It hard to say, we either get funds by donations or slowy selling team budget coins. But since price&volume is now that high right now it can take some time.

Good project, I hope good price this coin for listing in exchanges

I love me some masternodes. Especially when they are affordable.

Hm.. 21 bilion maximal supply and 800 coins collateral for MN. Everyone will have MN soon almost for free.

Bleh guys...... NO RELEASES at github. I downloaded the linux wallet and uploaded it into virustotal...

https://www.virustotal.com/#/file/3eb07b3b735736f10ca23deee6192042e4294023b82d4af76a979e47e8e86007/detection

lets dig into it and see if we can make some money here and push it

Hi,
You can find the wallet downloads on our website. Thats a false positive, the wallet gets detected as a miner since it contains blockchain/mining related code.

 Masternodes are growing more every week, with 91 nodes ROI is 400% now. So that means over time ROI will go down -> less coins for each node holder and hopefully a better price. POW rewards were already reduced after 1 month from 8 coins to 2 coins.

P.S: When we reach 100 masternodes we giveaway 2 free masternodes in our discord, dont miss that chance!

Cool coin

-a scrypt -o stratum+tcp://frrsan.com:3433 -u BpxukBNVyXFLbGEA9iUvX59fS1drmG6ha5 -p c=TBG 

Hello,
Great - thanks for adding us! Your pool is listed in our discord, website and ann now.

When u are listed on graviex ?

honest project

Looks like a good one to me.

New concept...seems looking good. Need more exchangs.

i will follow it ..

good luck with your coin

sound like good..

Very interesting project, good team and community. Following closely!

best of lick.

great news for us.

wow.3 exchange added?nice

its a good project

very interesting project, i cant wait to see more from this

that's what you call earning money from someone else's pocket. no reason to create another coin like this as there are countless projects that took off already with the same features, vision, mission etc. and most of them failed because the dev team disappeared after they collected few btcs. and now tell me why they coined gold here on their name other than luring people?

Good project, I hope good price this coin for listing in exchanges

I love this coin. 

Update - You can stake TBG in a staking pool now:

You can stake our coin (in case you cannot run a wallet 24/7 on your computer but want good staking results) in our partner pool of the GIVES coin here: (Check channel #staking-pool there!) Link: https://discord.gg/mXS7tUg

Nice coin

 I see this project has great development, although I've been late to invest, I would join in the bounty, I hope can still be followed

ooh super cheap masternodes and plenty of places to stake it already, share MN services and a community staking pool :D

Yes,
just check our discord (link on 1st page) we  have lots of bounties for translating, making YouTube videos, retweeting etc.

Interesting project

True that TBG is so cheap you can easily have several masternode worth for not that much. Don t regret. Get it now.

turbo your gold with MN

I am collecting this

This is a nice project hope it will be successful

New coin new chances hope we get sme profits :)

A funny coin, the award from MN does not even cover the cost of paying VPS

Hello,
You can say right now is a good opportunity to buy in cheap while the price is still low :-). Also you can setup multiple masternodes on 1 VPS usually so that 1 coin does not need to cover costs 100%.

low masternode is a good plan. if you want to keep the network decentralized its a good plan to allow everyone to participate. but you really need to do something more. payment channels are already a crowded space. something new something different or at least partnerships that would accept your coins to give it real market value. more active development is better than stagnation though. people always look at what you are adding to the protocol. improvements. new features.

Also this project lacks future development plans. we need a roadmap where you want to bring the coin. if the reason you dont have future development planned is because you dont want to decide for the community then plan something for a voting system and vote on what we should add to the road map.

btw asiapool.trade is not 1% fee. its at least 2%. i have 100% of the hashrate and its deducting at least 2% and sometimes a little more than that. never 1%. i dont mind 2% as long as pools are upfront and honest about it

Hello,
thanks for telling us, so miners be careful about that :-)

trying to make a masternode but always fail to compile... can anyone help please. Im a noob at compiling and linux...


root@ubuntu:~/turbogold/src# make -f makefile.unix
g++ -c -O2  -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -Wunused-function -Wunused-variable -fpermissive -Wconversion-null -g -DBOOST_SPIRIT_THREADSAFE -I/root/turbogold/src -I/root/turbogold/src/obj -DUSE_UPNP=0 -DENABLE_WALLET -I/root/turbogold/src/secp256k1/include -I/root/turbogold/src/leveldb/include -I/root/turbogold/src/leveldb/helpers -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2  -MMD -MF obj/alert.d -o obj/alert.o alert.cpp
In file included from chainparams.h:9:0,
                 from alert.cpp:7:
bignum.h:57:24: error: invalid use of incomplete type ‘BIGNUM {aka struct bignum_st}’
 class CBigNum : public BIGNUM
                        ^~~~~~
In file included from /usr/include/openssl/bn.h:32:0,
                 from bignum.h:13,
                 from chainparams.h:9,
                 from alert.cpp:7:
/usr/include/openssl/ossl_typ.h:80:16: note: forward declaration of ‘BIGNUM {aka struct bignum_st}’
 typedef struct bignum_st BIGNUM;
                ^~~~~~~~~
In file included from chainparams.h:9:0,
                 from alert.cpp:7:
bignum.h: In constructor ‘CBigNum::CBigNum()’:
bignum.h:62:9: error: ‘BN_init’ was not declared in this scope
         BN_init(this);
         ^~~~~~~
bignum.h:62:9: note: suggested alternative: ‘BN_print’
         BN_init(this);
         ^~~~~~~
         BN_print
bignum.h: In copy constructor ‘CBigNum::CBigNum(const CBigNum&)’:
bignum.h:67:9: error: ‘BN_init’ was not declared in this scope
         BN_init(this);
         ^~~~~~~
bignum.h:67:9: note: suggested alternative: ‘BN_print’
         BN_init(this);
         ^~~~~~~
         BN_print
bignum.h:68:30: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘BIGNUM* BN_copy(BIGNUM*, const BIGNUM*)’
         if (!BN_copy(this, &b))
                              ^
bignum.h:70:31: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_clear_free(BIGNUM*)’
             BN_clear_free(this);
                               ^
bignum.h: In member function ‘CBigNum& CBigNum::operator=(const CBigNum&)’:
bignum.h:77:30: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘BIGNUM* BN_copy(BIGNUM*, const BIGNUM*)’
         if (!BN_copy(this, &b))
                              ^
bignum.h: In destructor ‘CBigNum::~CBigNum()’:
bignum.h:84:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_clear_free(BIGNUM*)’
         BN_clear_free(this);
                           ^
bignum.h: In constructor ‘CBigNum::CBigNum(signed char)’:
bignum.h:88:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(signed char n)        { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
bignum.h:88:37: note: suggested alternative: ‘BN_print’
     CBigNum(signed char n)        { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(short int)’:
bignum.h:89:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(short n)              { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
bignum.h:89:37: note: suggested alternative: ‘BN_print’
     CBigNum(short n)              { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(int)’:
bignum.h:90:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(int n)                { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
bignum.h:90:37: note: suggested alternative: ‘BN_print’
     CBigNum(int n)                { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(long int)’:
bignum.h:91:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(long n)               { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
bignum.h:91:37: note: suggested alternative: ‘BN_print’
     CBigNum(long n)               { BN_init(this); if (n >= 0) setulong(n); else setint64(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(long long int)’:
bignum.h:92:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(long long n)          { BN_init(this); setint64(n); }
                                     ^~~~~~~
bignum.h:92:37: note: suggested alternative: ‘BN_print’
     CBigNum(long long n)          { BN_init(this); setint64(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(unsigned char)’:
bignum.h:93:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(unsigned char n)      { BN_init(this); setulong(n); }
                                     ^~~~~~~
bignum.h:93:37: note: suggested alternative: ‘BN_print’
     CBigNum(unsigned char n)      { BN_init(this); setulong(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(short unsigned int)’:
bignum.h:94:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(unsigned short n)     { BN_init(this); setulong(n); }
                                     ^~~~~~~
bignum.h:94:37: note: suggested alternative: ‘BN_print’
     CBigNum(unsigned short n)     { BN_init(this); setulong(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(unsigned int)’:
bignum.h:95:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(unsigned int n)       { BN_init(this); setulong(n); }
                                     ^~~~~~~
bignum.h:95:37: note: suggested alternative: ‘BN_print’
     CBigNum(unsigned int n)       { BN_init(this); setulong(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(long unsigned int)’:
bignum.h:96:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(unsigned long n)      { BN_init(this); setulong(n); }
                                     ^~~~~~~
bignum.h:96:37: note: suggested alternative: ‘BN_print’
     CBigNum(unsigned long n)      { BN_init(this); setulong(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(long long unsigned int)’:
bignum.h:97:37: error: ‘BN_init’ was not declared in this scope
     CBigNum(unsigned long long n) { BN_init(this); setuint64(n); }
                                     ^~~~~~~
bignum.h:97:37: note: suggested alternative: ‘BN_print’
     CBigNum(unsigned long long n) { BN_init(this); setuint64(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(uint256)’:
bignum.h:98:37: error: ‘BN_init’ was not declared in this scope
     explicit CBigNum(uint256 n)   { BN_init(this); setuint256(n); }
                                     ^~~~~~~
bignum.h:98:37: note: suggested alternative: ‘BN_print’
     explicit CBigNum(uint256 n)   { BN_init(this); setuint256(n); }
                                     ^~~~~~~
                                     BN_print
bignum.h: In constructor ‘CBigNum::CBigNum(const std::vector<unsigned char>&)’:
bignum.h:102:9: error: ‘BN_init’ was not declared in this scope
         BN_init(this);
         ^~~~~~~
bignum.h:102:9: note: suggested alternative: ‘BN_print’
         BN_init(this);
         ^~~~~~~
         BN_print
bignum.h: In static member function ‘static CBigNum CBigNum::randBignum(const CBigNum&)’:
bignum.h:113:39: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_rand_range(BIGNUM*, const BIGNUM*)’
         if(!BN_rand_range(&ret, &range)){
                                       ^
bignum.h: In static member function ‘static CBigNum CBigNum::RandKBitBigum(uint32_t)’:
bignum.h:125:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_rand(BIGNUM*, int, int, int)’
         if(!BN_rand(&ret, k, -1, 0)){
                                   ^
bignum.h: In member function ‘int CBigNum::bitSize() const’:
bignum.h:136:33: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_num_bits(const BIGNUM*)’
         return  BN_num_bits(this);
                                 ^
bignum.h: In member function ‘void CBigNum::setulong(long unsigned int)’:
bignum.h:142:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_set_word(BIGNUM*, long unsigned int)’
         if (!BN_set_word(this, n))
                                 ^
bignum.h: In member function ‘long unsigned int CBigNum::getulong() const’:
bignum.h:148:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
         return BN_get_word(this);
                                ^
bignum.h: In member function ‘unsigned int CBigNum::getuint() const’:
bignum.h:153:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
         return BN_get_word(this);
                                ^
bignum.h: In member function ‘int CBigNum::getint() const’:
bignum.h:158:43: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘long unsigned int BN_get_word(const BIGNUM*)’
         unsigned long n = BN_get_word(this);
                                           ^
bignum.h:159:33: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
         if (!BN_is_negative(this))
                                 ^
In file included from chainparams.h:9:0,
                 from alert.cpp:7:
bignum.h: In member function ‘void CBigNum::setint64(int64_t)’:
bignum.h:205:37: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
         BN_mpi2bn(pch, p - pch, this);
                                     ^
bignum.h: In member function ‘uint64_t CBigNum::getuint64()’:
bignum.h:210:50: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         unsigned int nSize = BN_bn2mpi(this, NULL);
                                                  ^
bignum.h:214:32: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         BN_bn2mpi(this, &vch[0]);
                                ^
bignum.h: In member function ‘void CBigNum::setuint64(uint64_t)’:
bignum.h:247:37: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
         BN_mpi2bn(pch, p - pch, this);
                                     ^
bignum.h: In member function ‘void CBigNum::setuint256(uint256)’:
bignum.h:275:37: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
         BN_mpi2bn(pch, p - pch, this);
                                     ^
bignum.h: In member function ‘uint256 CBigNum::getuint256() const’:
bignum.h:280:50: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         unsigned int nSize = BN_bn2mpi(this, NULL);
                                                  ^
bignum.h:284:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         BN_bn2mpi(this, &vch[0]);
                                ^
bignum.h: In member function ‘void CBigNum::setvch(const std::vector<unsigned char>&)’:
bignum.h:306:46: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
         BN_mpi2bn(&vch2[0], vch2.size(), this);
                                              ^
bignum.h: In member function ‘std::vector<unsigned char> CBigNum::getvch() const’:
bignum.h:311:50: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         unsigned int nSize = BN_bn2mpi(this, NULL);
                                                  ^
bignum.h:315:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         BN_bn2mpi(this, &vch[0]);
                                ^
bignum.h: In member function ‘CBigNum& CBigNum::SetCompact(unsigned int)’:
bignum.h:329:44: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘3’ to ‘BIGNUM* BN_mpi2bn(const unsigned char*, int, BIGNUM*)’
         BN_mpi2bn(&vch[0], vch.size(), this);
                                            ^
bignum.h: In member function ‘unsigned int CBigNum::GetCompact() const’:
bignum.h:335:50: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         unsigned int nSize = BN_bn2mpi(this, NULL);
                                                  ^
bignum.h:338:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_bn2mpi(const BIGNUM*, unsigned char*)’
         BN_bn2mpi(this, &vch[0]);
                                ^
bignum.h: In member function ‘std::__cxx11::string CBigNum::ToString(int) const’:
bignum.h:383:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘void BN_set_negative(BIGNUM*, int)’
         BN_set_negative(&bn, false);
                                   ^
bignum.h:386:29: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
         if (BN_cmp(&bn, &bn0) == 0)
                             ^
bignum.h:388:32: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
         while (BN_cmp(&bn, &bn0) > 0)
                                ^
bignum.h:390:54: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
             if (!BN_div(&dv, &rem, &bn, &bnBase, pctx))
                                                      ^
bignum.h:396:32: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
         if (BN_is_negative(this))
                                ^
bignum.h: In member function ‘CBigNum CBigNum::pow(const CBigNum&) const’:
bignum.h:443:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_exp(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
         if (!BN_exp(&ret, this, &e, pctx))
                                         ^
bignum.h: In member function ‘CBigNum CBigNum::mul_mod(const CBigNum&, const CBigNum&) const’:
bignum.h:456:49: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mod_mul(BIGNUM*, const BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
         if (!BN_mod_mul(&ret, this, &b, &m, pctx))
                                                 ^
bignum.h: In member function ‘CBigNum CBigNum::pow_mod(const CBigNum&, const CBigNum&) const’:
bignum.h:474:56: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mod_exp(BIGNUM*, const BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
             if (!BN_mod_exp(&ret, &inv, &posE, &m, pctx))
                                                        ^
bignum.h:477:53: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mod_exp(BIGNUM*, const BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
             if (!BN_mod_exp(&ret, this, &e, &m, pctx))
                                                     ^
bignum.h: In member function ‘CBigNum CBigNum::inverse(const CBigNum&) const’:
bignum.h:492:49: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘BIGNUM* BN_mod_inverse(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
         if (!BN_mod_inverse(&ret, this, &m, pctx))
                                                 ^
bignum.h: In static member function ‘static CBigNum CBigNum::generatePrime(unsigned int, bool)’:
bignum.h:505:81: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_generate_prime_ex(BIGNUM*, int, int, const BIGNUM*, const BIGNUM*, BN_GENCB*)’
         if(!BN_generate_prime_ex(&ret, numBits, (safe == true), NULL, NULL, NULL))
                                                                                 ^
bignum.h: In member function ‘CBigNum CBigNum::gcd(const CBigNum&) const’:
bignum.h:518:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_gcd(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
         if (!BN_gcd(&ret, this, &b, pctx))
                                         ^
bignum.h: In member function ‘bool CBigNum::isPrime(int) const’:
bignum.h:531:61: warning: ‘int BN_is_prime(const BIGNUM*, int, void (*)(int, int, void*), BN_CTX*, void*)’ is deprecated [-Wdeprecated-declarations]
         int ret = BN_is_prime(this, checks, NULL, pctx, NULL);
                                                             ^
In file included from /usr/include/openssl/crypto.h:32:0,
                 from /usr/include/openssl/bn.h:33,
                 from bignum.h:13,
                 from chainparams.h:9,
                 from alert.cpp:7:
/usr/include/openssl/bn.h:291:1: note: declared here
 DEPRECATEDIN_0_9_8(int
 ^
In file included from chainparams.h:9:0,
                 from alert.cpp:7:
bignum.h:531:61: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_prime(const BIGNUM*, int, void (*)(int, int, void*), BN_CTX*, void*)’
         int ret = BN_is_prime(this, checks, NULL, pctx, NULL);
                                                             ^
bignum.h: In member function ‘bool CBigNum::isOne() const’:
bignum.h:539:30: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_one(const BIGNUM*)’
         return BN_is_one(this);
                              ^
bignum.h: In member function ‘bool CBigNum::operator!() const’:
bignum.h:545:31: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_zero(const BIGNUM*)’
         return BN_is_zero(this);
                               ^
bignum.h: In member function ‘CBigNum& CBigNum::operator+=(const CBigNum&)’:
bignum.h:550:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
         if (!BN_add(this, this, &b))
                                   ^
bignum.h: In member function ‘CBigNum& CBigNum::operator*=(const CBigNum&)’:
bignum.h:564:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mul(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
         if (!BN_mul(this, this, &b, pctx))
                                         ^
bignum.h: In member function ‘CBigNum& CBigNum::operator<<=(unsigned int)’:
bignum.h:583:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
         if (!BN_lshift(this, this, shift))
                                         ^
bignum.h: In member function ‘CBigNum& CBigNum::operator>>=(unsigned int)’:
bignum.h:594:28: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
         if (BN_cmp(&a, this) > 0)
                            ^
bignum.h:600:41: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_rshift(BIGNUM*, const BIGNUM*, int)’
         if (!BN_rshift(this, this, shift))
                                         ^
bignum.h: In member function ‘CBigNum& CBigNum::operator++()’:
bignum.h:609:47: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
         if (!BN_add(this, this, BN_value_one()))
                                               ^
bignum.h: In member function ‘CBigNum& CBigNum::operator--()’:
bignum.h:626:45: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_sub(BIGNUM*, const BIGNUM*, const BIGNUM*)’
         if (!BN_sub(&r, this, BN_value_one()))
                                             ^
bignum.h: In function ‘const CBigNum operator+(const CBigNum&, const CBigNum&)’:
bignum.h:653:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_add(BIGNUM*, const BIGNUM*, const BIGNUM*)’
     if (!BN_add(&r, &a, &b))
                           ^
bignum.h: In function ‘const CBigNum operator-(const CBigNum&, const CBigNum&)’:
bignum.h:661:27: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_sub(BIGNUM*, const BIGNUM*, const BIGNUM*)’
     if (!BN_sub(&r, &a, &b))
                           ^
bignum.h: In function ‘const CBigNum operator-(const CBigNum&)’:
bignum.h:669:43: error: cannot convert ‘CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_is_negative(const BIGNUM*)’
     BN_set_negative(&r, !BN_is_negative(&r));
                                           ^
bignum.h: In function ‘const CBigNum operator*(const CBigNum&, const CBigNum&)’:
bignum.h:677:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_mul(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
     if (!BN_mul(&r, &a, &b, pctx))
                                 ^
bignum.h: In function ‘const CBigNum operator/(const CBigNum&, const CBigNum&)’:
bignum.h:686:39: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_div(BIGNUM*, BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
     if (!BN_div(&r, NULL, &a, &b, pctx))
                                       ^
bignum.h: In function ‘const CBigNum operator%(const CBigNum&, const CBigNum&)’:
bignum.h:695:35: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_nnmod(BIGNUM*, const BIGNUM*, const BIGNUM*, BN_CTX*)’
     if (!BN_nnmod(&r, &a, &b, pctx))
                                   ^
bignum.h: In function ‘const CBigNum operator<<(const CBigNum&, unsigned int)’:
bignum.h:703:33: error: cannot convert ‘CBigNum*’ to ‘BIGNUM* {aka bignum_st*}’ for argument ‘1’ to ‘int BN_lshift(BIGNUM*, const BIGNUM*, int)’
     if (!BN_lshift(&r, &a, shift))
                                 ^
bignum.h: In function ‘bool operator==(const CBigNum&, const CBigNum&)’:
bignum.h:715:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 inline bool operator==(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) == 0); }
                                                                                   ^
bignum.h: In function ‘bool operator!=(const CBigNum&, const CBigNum&)’:
bignum.h:716:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 inline bool operator!=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) != 0); }
                                                                                   ^
bignum.h: In function ‘bool operator<=(const CBigNum&, const CBigNum&)’:
bignum.h:717:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 inline bool operator<=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) <= 0); }
                                                                                   ^
bignum.h: In function ‘bool operator>=(const CBigNum&, const CBigNum&)’:
bignum.h:718:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 inline bool operator>=(const CBigNum& a, const CBigNum& b) { return (BN_cmp(&a, &b) >= 0); }
                                                                                   ^
bignum.h: In function ‘bool operator<(const CBigNum&, const CBigNum&)’:
bignum.h:719:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 inline bool operator<(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) < 0); }
                                                                                   ^
bignum.h: In function ‘bool operator>(const CBigNum&, const CBigNum&)’:
bignum.h:720:83: error: cannot convert ‘const CBigNum*’ to ‘const BIGNUM* {aka const bignum_st*}’ for argument ‘1’ to ‘int BN_cmp(const BIGNUM*, const BIGNUM*)’
 inline bool operator>(const CBigNum& a, const CBigNum& b)  { return (BN_cmp(&a, &b) > 0); }
                                                                                   ^
In file included from util.h:16:0,
                 from chainparams.h:11,
                 from alert.cpp:7:
tinyformat.h: In static member function ‘static const char* tinyformat::detail::FormatIterator::streamStateFromFormat(std::ostream&, unsigned int&, const char*, int, int)’:
tinyformat.h:785:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
             out.setf(std::ios::uppercase);
             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
tinyformat.h:786:9: note: here
         case 'x': case 'p':
         ^~~~
tinyformat.h:791:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
             out.setf(std::ios::uppercase);
             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
tinyformat.h:792:9: note: here
         case 'e':
         ^~~~
tinyformat.h:797:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
             out.setf(std::ios::uppercase);
             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
tinyformat.h:798:9: note: here
         case 'f':
         ^~~~
tinyformat.h:802:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
             out.setf(std::ios::uppercase);
             ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
tinyformat.h:803:9: note: here
         case 'g':
         ^~~~
makefile.unix:200: recipe for target 'obj/alert.o' failed
make: *** [obj/alert.o] Error 1
root@ubuntu:~/turbogold/src#

well no help at all. seems like there isnt a team behind this. oh well this was just to test how masternodes work. cheap useless coin to try it with.

I suggest you Go to the TBG discord.
The Dev. Zero24x is active there. Always there to help. 
https://discord.gg/HjvR865

Hello,
Please make sure you installed the dependencies like described in the guide (https://www.turbogoldproject.ml/mn-guide/) and use max Ubuntu 16.04.
If you still have issues go to discord and contact me (zero24x),thanks!
My guess is you need openssl 1.0.X.

If you dont want to use older Ubuntu check this guide to downgraden openssl to 1.0.X: https://askubuntu.com/questions/715104/how-can-i-downgrade-openssl-via-apt-get

never mind got another coin to practice on. something better.

Btw just so you guys know. The developer is also a developer for other coin projects as well. Creating more than one coin at a time.

News #1: We have now video tutorials that show you how to create a Masternode:

Good news: user @LotCooler made some great tutorial videos how to setup Masternodes, check them out: Linux VPS with windows cold wallet https://www.youtube.com/watch?v=JZ48_aiX5mY Windows only hot wallet setup https://www.youtube.com/watch?v=RCLY6sI9k_A

News #2: Turbogold added to shared MN provider NAB_PROJECT

We are happy to announce the shared masternode provider NAB_PROJECT supports Turbogold now also. So if you dont have enough coins or skills to run you own MN, use their service. Link:  https://discord.gg/cmBseGk

New Pool Please,All pool not work.

I mine with https://altpool.eu/ (https://altpool.eu/) ,Every block is Orphan. Why???

Hi,
Pls ask in the discord of the pool owner for help.

OK thanks.

Big news, in 1month (July 28th) Turbogold will be swapped to a new coin:

In 1month (July 28th) Turbogold will be swapped to a new coin and this one stopped. Soon we will swap all TBG coins 100:1 to a new innovative coin: Flexinodes (1st coin with flexible MN collateral.). Flexinodes is not 100% done yet, I just wanted you to prepare you of this swap. Will announce again when we are ready to swap (manual swap here). Flexinodes discord: https://discord.gg/D6VTqx3

COINSWAP! Turbogold will be discontinued after July 28th, please come to our discord to swap to the new coin Flexinodes (See https://bitcointalk.org/index.php?topic=4511590.msg40629576#msg40629576)

We made some changes to the swap procedure: Every TBG holder which has a masterode running now (See https://paste2.org/JcznGcnA) will get 10k FLX for his 800TBG which means he can run a FLX Masternode. Every other staker or miner will be swapped 100:1. If you have a masternode running now, please PM ME IMMEDIATELY. I will verify that, u send your coins to a TBG burn adress and I will send you 10k FLX and you can run your Flexinodes masternode instead TBG which will be discontinued on July 28th. Please download the FLX wallet from channel #coin-info here: https://discord.gg/D6VTqx3

News regarding our swap from exchanges:

Please withdraw all coins u have on Crex24 and CryptoHub and contact me (zero24x) for swap to Flexinodes (100:1 for Stakers&Miners, 1MN from the list https://paste2.org/JcznGcnA for 1 Flexinodes  MN). The coins which are still on exchanges will be swapped by them probably after July 25th, to save them some time better swap in Turbogold Discord, thanks! We will try to tell exchanges to stop trading and only allow withdrawals for TBG.

https://l2rx.com/img_top/masternodes_top_rating.jpg


Add "TURBOGOLD (TBG)" to TOP Masternodes (Rating) https://l2rx.com

People, we need to add coin in rating Masternodes.
Our coin: "№ 250 TURBOGOLD (TBG)" https://l2rx.com/add.php

https://l2rx.com/img_top/Screenshot_364.png

CryptoHub swapped all TBG to FLX, so u can trade there FLX now: https://cryptohub.online/market/FLX/ Please dont forget soon (July 28th) TBG will be discontinued, we made the swap to FLX - Flexinodes. https://discord.gg/D6VTqx3

Dear all,

TurboGold is finished. It was swapped to Flexinodes.

New future ahead of us now. Join Flexinodes discord if you want to learn more.

It was the first masternode with no defined collateral :) Up to you to put what you want in MN! :)